From 9d2a873bdf72a7c615c9c7ac55357085d0299716 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 31 Aug 2005 12:55:50 +0200 Subject: Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT). Removed CFG_CMD_DISPLAY from default commands. Fixed compiler warning in net.c. Patch by Stefan Roese, 31 Aug 2005 --- include/configs/TQM8540.h | 39 ++++++++++++++++++++++++++++++++++----- include/configs/TQM8560.h | 39 +++++++++++++++++++++++++++++++++++---- 2 files changed, 69 insertions(+), 9 deletions(-) (limited to 'include/configs') diff --git a/include/configs/TQM8540.h b/include/configs/TQM8540.h index 5a92244..f35914a 100644 --- a/include/configs/TQM8540.h +++ b/include/configs/TQM8540.h @@ -230,11 +230,33 @@ #endif /* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */ + +/* I2C RTC */ +#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* I2C EEPROM */ +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also). + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ @@ -301,7 +323,6 @@ #endif /* CONFIG_TSEC_ENET */ - /* * Environment */ @@ -342,6 +363,9 @@ #define CONFIG_COMMANDS (CONFIG_CMD_PRIV | \ ADD_PCI_CMD | \ CFG_CMD_I2C | \ + CFG_CMD_DATE | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DTT | \ CFG_CMD_PING ) #include @@ -426,6 +450,11 @@ "bootfile=/tftpboot/tqm8540/uImage\0" \ "kernel_addr=FE000000\0" \ "ramdisk_addr=FE100000\0" \ + "load=tftp 100000 /tftpboot/tqm8540/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b 100000 fffc0000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h index a72346d..f48d04e 100644 --- a/include/configs/TQM8560.h +++ b/include/configs/TQM8560.h @@ -38,6 +38,7 @@ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_CPM2 1 /* has CPM2 */ #define CONFIG_MPC8560 1 /* MPC8560 specific */ #define CONFIG_TQM8560 1 /* TQM8560 board specific */ @@ -226,11 +227,33 @@ #endif /* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */ + +/* I2C RTC */ +#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* I2C EEPROM */ +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work also). + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 /* RapidIO MMU */ #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ @@ -331,6 +354,9 @@ #define CONFIG_COMMANDS (CONFIG_CMD_PRIV | \ ADD_PCI_CMD | \ CFG_CMD_I2C | \ + CFG_CMD_DATE | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DTT | \ CFG_CMD_PING ) #include @@ -415,6 +441,11 @@ "bootfile=/tftpboot/tqm8560/uImage\0" \ "kernel_addr=FE000000\0" \ "ramdisk_addr=FE100000\0" \ + "load=tftp 100000 /tftpboot/tqm8560/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b 100000 fffc0000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" -- cgit v1.1