From 93b25c08139d08c4236bd16bb1cd6508b7df4b0b Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:17 -0600 Subject: arm: Remove omap3_sdp3430 board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- include/configs/omap3_sdp3430.h | 318 ---------------------------------------- 1 file changed, 318 deletions(-) delete mode 100644 include/configs/omap3_sdp3430.h (limited to 'include/configs') diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h deleted file mode 100644 index f43e477..0000000 --- a/include/configs/omap3_sdp3430.h +++ /dev/null @@ -1,318 +0,0 @@ -/* - * (C) Copyright 2006-2009 - * Texas Instruments Incorporated. - * Richard Woodruff - * Syed Mohammed Khasim - * Nishanth Menon - * - * Configuration settings for the 3430 TI SDP3430 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* TODO: REMOVE THE FOLLOWING - * Retained the following till size.h is removed in u-boot - */ -#include -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include /* get chip and board defs */ -#include - -/* - * NOTE: these #defines presume standard SDP jumper settings. - * In particular: - * - 26 MHz clock (not 19.2 or 38.4 MHz) - * - Boot from 128MB NOR, not NAND or OneNAND - * - * At this writing, OMAP3 U-Boot support doesn't permit concurrent - * support for all the flash types the board supports. - */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -#define CONFIG_OF_LIBFDT 1 - -/* - * Size of malloc() pool - * Total Size Environment - 256k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) - -/*--------------------------------------------------------------------------*/ - -/* - * Hardware drivers - */ - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be - * swapped with UART2 via jumpering. Downsides of using J8: it doesn't - * support UART boot (that's only for UART3); it prevents sharing a Linux - * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards. - * - * UART boot uses UART3 on J9, and the SDP user's guide says to use - * that for console. Downsides of using J9: you can't use IRDA too; - * since UART3 isn't in the CORE power domain, it may be a bit less - * usable in certain PM-sensitive debug scenarios. - */ -#undef CONSOLE_J9 /* else J8/UART1 (innermost) */ - -#ifdef CONSOLE_J9 -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ -#else -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 */ -#endif - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* - * I2C for power management setup - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* OMITTED: single 1 Gbit MT29F1G NAND flash */ - -/* - * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash - */ -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */ -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ - -#define CONFIG_SYS_FLASH_CFI_WIDTH 2 -#define PHYS_FLASH_SIZE (128 << 20) -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */ - -/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10) -#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE) -/*--------------------------------------------------------------------------*/ - -/* Enabled commands */ -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ -#define CONFIG_CMD_MMC /* MMC support */ - -/*--------------------------------------------------------------------------*/ -/* - * MMC boot support - */ - -#if defined(CONFIG_CMD_MMC) -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 -#endif - -/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_LAN91C96 -#define CONFIG_LAN91C96_BASE DEBUG_BASE -#define CONFIG_LAN91C96_EXT_PHY - -#define CONFIG_BOOTP_SEND_HOSTNAME -/* - * BOOTP fields - */ -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 -#endif /* (CONFIG_CMD_NET) */ - -/* - * Environment setup - * - * Default boot order: mmc bootscript, MMC uImage, NOR image. - * Network booting environment must be configured at site. - */ - -/* allow overwriting serial config and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyS0,115200n8\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "norargs=setenv bootargs console=${console} " \ - "root=/dev/mtdblock3 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from MMC/SD ...; " \ - "autoscr ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from MMC/SD ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "norboot=echo Booting from NOR ...; " \ - "run norargs; " \ - "bootm 0x80000\0" \ - -#define CONFIG_BOOTCOMMAND \ - "if mmcinit; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run norboot; " \ - "fi; " \ - "fi; " \ - "else run norboot; fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/*--------------------------------------------------------------------------*/ - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg - - * a basic sanity check ONLY - * IF you would like to increase coverage, increase the end address - * or run the test with custom options - */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/*--------------------------------------------------------------------------*/ - -/* - * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by - * 32KHz clk, or from external sig. This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/*--------------------------------------------------------------------------*/ - -/* - * NOR FLASH usage ... default nCS0: - * - one 256KB sector for U-Boot - * - one 256KB sector for its parameters (not all used) - * - eight sectors (2 MB) for kernel - * - rest for JFFS2 - */ - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) - -/* - * NAND FLASH usage ... default nCS1: - * - four 128KB sectors for X-Loader - * - four 128KB sectors for U-Boot - * - two 128KB sector for its parameters - * - 32 sectors (4 MB) for kernel - * - rest for filesystem - */ - -/* - * OneNAND FLASH usage ... default nCS2: - * - four 128KB sectors for X-Loader - * - two 128KB sectors for U-Boot - * - one 128KB sector for its parameters - * - sixteen sectors (2 MB) for kernel - * - rest for filesystem - */ - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -#endif /* __CONFIG_H */ -- cgit v1.1