From 70d8c9446fe1d99dd4148dc39ceb5dc6ce39a934 Mon Sep 17 00:00:00 2001 From: Jason Kridner Date: Mon, 18 Apr 2011 17:23:35 -0400 Subject: BeagleBoard: Added LED driver Added LED driver using status_led. USR0 is set to monitor the boot status. USR1 is set to be the green LED. Included adding configuration and command to the default configuration. Signed-off-by: Jason Kridner Signed-off-by: Sandeep Paulraj --- include/configs/omap3_beagle.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/configs') diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 5cfa4cb..c064ae7 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -108,6 +108,18 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* Status LED */ +#define CONFIG_STATUS_LED 1 +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_BIT 0x01 +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 0x02 +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT STATUS_LED_BIT +#define STATUS_LED_GREEN STATUS_LED_BIT1 + /* DDR - I use Micron DDR */ #define CONFIG_OMAP3_MICRON_DDR 1 @@ -138,6 +150,7 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_LED /* LED support */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -- cgit v1.1