From ea1ea54e35e64386cc9eefbf0d96091430a7482a Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Wed, 12 Sep 2012 14:17:32 -0700 Subject: mpc8308rdb: add support for Spansion SPI flash on header J8 The SPI pins are routed to header J8 for testing SPI functionality. A Spansion flash has been wired up and tested on this header. This patch breaks support for the second TSEC interface, since the GPIO pin used as a chip select is pinmuxed with some of the TSEC pins. Signed-off-by: Ira W. Snyder Signed-off-by: Kim Phillips --- include/configs/MPC8308RDB.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/configs') diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 7f2761c..a24538a 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -340,6 +340,19 @@ #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 +/* + * SPI on header J8 + * + * WARNING: enabling this will break TSEC2 (connected to the Vitesse switch) + * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins. + */ +#ifdef CONFIG_MPC8XXX_SPI +#define CONFIG_CMD_SPI +#define CONFIG_USE_SPIFLASH +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#endif /* * Board info - revision and where boot from -- cgit v1.1 From 40775e9676f23adddc4aa47d8281d4a4b22f4c17 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Wed, 12 Sep 2012 14:17:34 -0700 Subject: mpc8308rdb: add support for FIT images This is very useful on a modern system. Signed-off-by: Ira W. Snyder Signed-off-by: Kim Phillips --- include/configs/MPC8308RDB.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/configs') diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index a24538a..c65635f 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -37,6 +37,10 @@ #define CONFIG_MISC_INIT_R +/* new uImage format support */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 + /* * On-board devices * -- cgit v1.1 From db1fc7d28e8947c402149ded4597970fdb3e5571 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Wed, 12 Sep 2012 14:17:35 -0700 Subject: mpc8308rdb: add support for eSDHC MMC controller Add support for the onboard eSDHC MMC controller. The hardware on the MPC8308RDB has the following errata: - ESDHC111: manual asynchronous CMD12 is broken - DMA is broken (PIO works) Signed-off-by: Ira W. Snyder [added include fsl_esdhc header to prevent implicit declarations of fsl_esdhc_mmc_init() and fdt_fixup_esdhc()] Signed-off-by: Kim Phillips --- include/configs/MPC8308RDB.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/configs') diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index c65635f..2d48dde 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -41,6 +41,20 @@ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 +#define CONFIG_MMC 1 + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ESDHC_USE_PIO + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* * On-board devices * -- cgit v1.1