From 3b9c1a5dc09e5ee773f5a4fe9280e568b64b7779 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 10 Nov 2014 08:50:41 +0800 Subject: imx:mx6slevk add board level support for usb Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode There are two usb port on mx6slevk board: 1. otg port 2. host port The following are the connection between usb controller and board usb interface, host port has not ID pin set: otg1 core <---> board otg port otg2 core <---> board host port In order to make host port work, board_usb_phy_mode return USB_INIT_HOST to let host port work in host mode. Signed-off-by: Peng Fan Signed-off-by: Ye Li --- include/configs/mx6slevk.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/configs') diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 4fcaf51..bd57159 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -209,6 +209,20 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif +/* USB Configs */ +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + #define CONFIG_SYS_FSL_USDHC_NUM 3 #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ -- cgit v1.1