From fcb28e763415e0e4e66b0f45842d1557ae198e5e Mon Sep 17 00:00:00 2001 From: Jin Zhengxiong Date: Thu, 13 Jul 2006 10:35:10 -0500 Subject: Fixed initrd issue by define big RAM Signed-off-by:Jason Jin --- include/configs/MPC8641HPCN.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/configs') diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index b089769..aca2ecc 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -100,6 +100,7 @@ */ #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM #define MPC86xx_DDR_SDRAM_CLK_CNTL -- cgit v1.1 From bea3f28d285942bf3f7ab339ce85178ded544225 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Wed, 12 Jul 2006 10:48:05 -0400 Subject: Add support for reading and writing mac addresses to or from ID EEPROM. Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang Signed-off-by: York Sun --- include/configs/MPC8641HPCN.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/configs') diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index aca2ecc..7e91e64 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -146,6 +146,8 @@ #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ #endif +#define CFG_ID_EEPROM 1 +#define ID_EEPROM_ADDR 0x57 /* * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. -- cgit v1.1