From 46414296953410706e917cef9238926084e83a4b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 16 Feb 2015 12:16:15 -0700 Subject: rpi: add support for Raspberry Pi 2 model B USB doesn't seem to work yet; the controller detects the on-board Hub/ Ethernet device but can't read the descriptors from it. I haven't investigated yet. Signed-off-by: Stephen Warren --- include/configs/rpi-common.h | 186 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 include/configs/rpi-common.h (limited to 'include/configs/rpi-common.h') diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h new file mode 100644 index 0000000..3121ac9 --- /dev/null +++ b/include/configs/rpi-common.h @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RPI_COMMON_H_ +#define _RPI_COMMON_H_ + +#include + +/* Architecture, CPU, etc.*/ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BCM2835 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_DCACHE_OFF +/* + * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, + * so 2708 has historically been used rather than a dedicated 2835 ID. + * + * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation + * chose to use someone else's previously registered machine ID (3139, MX51_GGC) + * rather than obtaining a valid ID:-/ + */ +#ifndef CONFIG_BCM2836 +#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 +#endif + +/* Memory layout */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00008000 +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* + * The board really has 256M. However, the VC (VideoCore co-processor) shares + * the RAM, and uses a configurable portion at the top. We tell U-Boot that a + * smaller amount of RAM is present in order to avoid stomping on the area + * the VC uses. + */ +#define CONFIG_SYS_SDRAM_SIZE SZ_128M +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00200000 +#define CONFIG_LOADADDR 0x00200000 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Devices */ +/* GPIO */ +#define CONFIG_BCM2835_GPIO +/* LCD */ +#define CONFIG_LCD +#define CONFIG_LCD_DT_SIMPLEFB +#define LCD_BPP LCD_COLOR16 +/* + * Prevent allocation of RAM for FB; the real FB address is queried + * dynamically from the VideoCore co-processor, and comes from RAM + * not owned by the ARM CPU. + */ +#define CONFIG_FB_ADDR 0 +#define CONFIG_VIDEO_BCM2835 +#define CONFIG_SYS_WHITE_ON_BLACK + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_MMC_SDHCI_IO_ACCESSORS +#define CONFIG_BCM2835_SDHCI + +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2 +#ifdef CONFIG_BCM2836 +#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000 +#else +#define CONFIG_USB_DWC2_REG_ADDR 0x20980000 +#endif +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MISC_INIT_R +#endif + +/* Console UART */ +#define CONFIG_PL01X_SERIAL +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Environment */ +#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_FAT_WRITE +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Shell */ +#define CONFIG_SYS_MAXARGS 8 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_COMMAND_HISTORY + +/* Commands */ +#include +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* Device tree support */ +#define CONFIG_OF_BOARD_SETUP +/* ATAGs support for bootm/bootz */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#include + +/* Some things don't make sense on this HW or yet */ +#undef CONFIG_CMD_FPGA + +/* Environment */ +#define ENV_DEVICE_SETTINGS \ + "stdin=serial,lcd\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it low in memory to avoid conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it low in memory to avoid conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define ENV_MEM_LAYOUT_SETTINGS \ + "scriptaddr=0x00000000\0" \ + "pxefile_addr_r=0x00100000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include + +#define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_DEVICE_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV + +#define CONFIG_BOOTDELAY 2 + +#endif -- cgit v1.1