From d794cfefead5fc177cf4f41164e80382e9c9484a Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@jdl.com>
Date: Wed, 4 Jul 2007 22:31:15 -0500
Subject: include/configs: Use new CONFIG_CMD_* in various 5200 board config
 files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
 include/configs/mecp5200.h | 39 ++++++++++++++++++---------------------
 1 file changed, 18 insertions(+), 21 deletions(-)

(limited to 'include/configs/mecp5200.h')

diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 0c10294..6f0d497 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -50,11 +50,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -88,26 +83,23 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
-				 CFG_CMD_EEPROM	| \
-				 CFG_CMD_FAT	| \
-				 CFG_CMD_EXT2	| \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_IDE	| \
-				 CFG_CMD_BSP	| \
-				 CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1
@@ -258,7 +250,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -276,6 +268,11 @@
 
 #define CFG_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */
-- 
cgit v1.1


From 7f5c01577400c74cc5bac74f41dd0d3c79df623c Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Tue, 10 Jul 2007 09:38:02 -0500
Subject: include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
 include/configs/mecp5200.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'include/configs/mecp5200.h')

diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 6f0d497..49919fb 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -88,6 +88,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
-- 
cgit v1.1