From 2c650e20107917ed90a36ca574a6816fb5d3342e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 5 Sep 2011 14:37:29 +0200 Subject: ARM: remove broken "gcplus" board. Signed-off-by: Wolfgang Denk Cc: Albert ARIBAUD Cc: George G. Davis --- include/configs/gcplus.h | 185 ----------------------------------------------- 1 file changed, 185 deletions(-) delete mode 100644 include/configs/gcplus.h (limited to 'include/configs/gcplus.h') diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h deleted file mode 100644 index 9412daa..0000000 --- a/include/configs/gcplus.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * 2003-2004 (c) MontaVista Software, Inc. - * - * Configuation settings for the ADS GraphicsClient+ board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000. - * We don't actually init RAM in this case since we're using U-Boot as - * an secondary boot loader during Linux kernel development and testing, - * e.g. bootp/tftp download of the kernel is a far more convenient - * when testing new kernels on this target. However the ADS GCPlus Linux - * boot ROM leaves the MMU enabled when it passes control to U-Boot. So - * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem. - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_SA1110 1 /* This is an SA1100 CPU */ -#define CONFIG_GCPLUS 1 /* on an ADS GCPlus Board */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - - -/* - * Hardware drivers - */ -#define CONFIG_NET_MULTI -#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */ -#define CONFIG_LAN91C96_BASE 0x100e0000 - -/* - * select serial console configuration - */ -#define CONFIG_SA1100_SERIAL -#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on ADS GCPlus */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp" -#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm" -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "ADS GCPlus # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */ - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */ - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -#define PHYS_SDRAM_2 0xc8000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x01000000 /* 16 MB */ - - -#define PHYS_FLASH_1 0x08000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#if 1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#else -/* REVISIT: This doesn't work on ADS GCPlus just yet: */ -#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */ -/*#define CONFIG_SYS_FLASH_PROTECTION 1 /--* hardware flash protection */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#endif - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE) /* Addr of Environment Sector */ -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE - -#endif /* __CONFIG_H */ -- cgit v1.1