From 33af3e6656e84660d397b5dd95abab2dccc36f83 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 1 Oct 2008 12:34:58 +0200 Subject: TQM5200: enable support for ATAPI devices Signed-off-by: Wolfgang Denk --- include/configs/TQM5200.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/configs/TQM5200.h') diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index efc8da4..2cc215a 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -720,6 +720,9 @@ /* Interval between registers */ #define CFG_ATA_STRIDE 4 +/* Support ATAPI devices */ +#define CONFIG_ATAPI 1 + /*----------------------------------------------------------------------- * Open firmware flat tree support *----------------------------------------------------------------------- -- cgit v1.1 From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- include/configs/TQM5200.h | 264 +++++++++++++++++++++++----------------------- 1 file changed, 132 insertions(+), 132 deletions(-) (limited to 'include/configs/TQM5200.h') diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2cc215a..db7f51d 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -42,7 +42,7 @@ #define CONFIG_STK52XX 1 /* ... on a STK52XX board */ #endif -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -54,11 +54,11 @@ */ #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_BOOTCOUNT_LIMIT 1 #ifdef CONFIG_FO300 -#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enable null device */ #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */ #define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ @@ -75,7 +75,7 @@ #define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ #define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ #define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ -#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ #define CONFIG_BOARD_EARLY_INIT_R #endif /* CONFIG_STK52XX */ @@ -99,7 +99,7 @@ #define CONFIG_NET_MULTI 1 #define CONFIG_EEPRO100 1 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ @@ -122,7 +122,7 @@ #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN -#define CFG_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_IS_IN_ENV #endif /* #ifndef CONFIG_TQM5200S */ @@ -134,24 +134,24 @@ /* USB */ #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) #define CONFIG_USB_OHCI_NEW -#define CFG_OHCI_BE_CONTROLLER +#define CONFIG_SYS_OHCI_BE_CONTROLLER #define CONFIG_USB_STORAGE #define CONFIG_CMD_FAT #define CONFIG_CMD_USB -#undef CFG_USB_OHCI_BOARD_INIT -#define CFG_USB_OHCI_CPU_INIT -#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CFG_USB_OHCI_SLOT_NAME "mpc5200" -#define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#undef CONFIG_SYS_USB_OHCI_BOARD_INIT +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 #endif #ifndef CONFIG_CAM5200 /* POST support */ -#define CONFIG_POST (CFG_POST_MEMORY | \ - CFG_POST_CPU | \ - CFG_POST_I2C) +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_I2C) #endif #ifdef CONFIG_POST @@ -215,7 +215,7 @@ #define CONFIG_TIMESTAMP /* display image timestamps */ #if (TEXT_BASE != 0xFFF00000) -# define CFG_LOWBOOT 1 /* Boot low */ +# define CONFIG_SYS_LOWBOOT 1 /* Boot low */ #endif /* @@ -229,7 +229,7 @@ #undef CONFIG_BOOTARGS -#if defined(CONFIG_TQM5200_B) && !defined(CFG_LOWBOOT) +#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT) # define ENV_UPDT \ "update=protect off FFF00000 +${filesize};" \ "erase FFF00000 +${filesize};" \ @@ -307,17 +307,17 @@ /* * IPB Bus clocking configuration. */ -#define CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#if defined(CFG_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) +#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) /* * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of + * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ -#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ +#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ #endif /* @@ -325,9 +325,9 @@ */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #ifdef CONFIG_TQM5200_REV100 -#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ +#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ #else -#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ #endif /* @@ -336,11 +336,11 @@ * Please notice, that the resulting clock frequency could differ from the * configured value. This is because the I2C clock is derived from system * clock over a frequency divider with only a few divider values. U-boot - * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated * approximation allways lies below the configured value, never above. */ -#define CFG_I2C_SPEED 100000 /* 100 kHz */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work @@ -348,62 +348,62 @@ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the * same configuration could be used. */ -#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* * HW-Monitor configuration on Mini-FAP */ #if defined (CONFIG_MINIFAP) -#define CFG_I2C_HWMON_ADDR 0x2C +#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C #endif /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_HWMON_ADDR, \ - CFG_I2C_SLAVE } +#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE } #endif /* * Flash configuration */ -#define CFG_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_BASE 0xFC000000 #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) -#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks (= chip selects) */ -#define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CFG_FLASH_ADDR0 0x555 -#define CFG_FLASH_ADDR1 0x2AA -#define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ -#define CFG_MAX_FLASH_SECT 128 +#define CONFIG_SYS_FLASH_WORD_SIZE unsigned int /* main flash device with */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CONFIG_SYS_FLASH_ADDR0 0x555 +#define CONFIG_SYS_FLASH_ADDR1 0x2AA +#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 #else /* use CFI flash driver */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ -#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ #endif -#define CFG_FLASH_EMPTY_INFO -#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 #if defined (CONFIG_CAM5200) -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) #elif defined(CONFIG_TQM5200_B) -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000) #else -# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) #endif /* Dynamic MTD partition support */ @@ -412,7 +412,7 @@ #ifdef CONFIG_STK52XX # if defined(CONFIG_TQM5200_B) -# if defined(CFG_LOWBOOT) +# if defined(CONFIG_SYS_LOWBOOT) # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ "256k(dtb)," \ "2304k(kernel)," \ @@ -427,7 +427,7 @@ "8m(misc)," \ "15m(big-fs)," \ "1m(firmware)" -# endif /* CFG_LOWBOOT */ +# endif /* CONFIG_SYS_LOWBOOT */ # else /* !CONFIG_TQM5200_B */ # define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "128k(dtb)," \ @@ -469,39 +469,39 @@ /* * Memory map */ -#define CFG_MBAR 0xF0000000 -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 /* Use ON-Chip SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM #ifdef CONFIG_POST /* preserve space for the post_word at end of on-chip SRAM */ -#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE #else -#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE #endif -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 #endif #if defined (CONFIG_CAM5200) -# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #elif defined(CONFIG_TQM5200_B) -# define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +# define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ #else -# define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +# define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ #endif -#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Ethernet configuration @@ -555,23 +555,23 @@ * 100 -> UART (on all boards). */ #if defined (CONFIG_MINIFAP) -# define CFG_GPS_PORT_CONFIG 0x91000004 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 #elif defined (CONFIG_STK52XX) # if defined (CONFIG_STK52XX_REV100) -# define CFG_GPS_PORT_CONFIG 0x81500014 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014 # else /* STK52xx REV200 and above */ # if defined (CONFIG_TQM5200_REV100) # error TQM5200 REV100 not supported on STK52XX REV200 or above # else/* TQM5200 REV200 and above */ -# define CFG_GPS_PORT_CONFIG 0x91500404 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500404 # endif # endif #elif defined (CONFIG_FO300) -# define CFG_GPS_PORT_CONFIG 0x91502c24 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x91502c24 #elif defined (CONFIG_CAM5200) -# define CFG_GPS_PORT_CONFIG 0x8050A444 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x8050A444 #else /* TMQ5200 Inbetriebnahme-Board */ -# define CFG_GPS_PORT_CONFIG 0x81000004 +# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 #endif /* @@ -579,8 +579,8 @@ */ #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100) # define CONFIG_RTC_M41T11 1 -# define CFG_I2C_RTC_ADDR 0x68 -# define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base +# define CONFIG_SYS_I2C_RTC_ADDR 0x68 +# define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base year */ #else # define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ @@ -589,36 +589,36 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ /* Enable an alternate, more extensive memory test */ -#define CFG_ALT_MEMTEST +#define CONFIG_SYS_ALT_MEMTEST -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * Enable loopw command. @@ -629,22 +629,22 @@ * Various low-level settings */ #if defined(CONFIG_MPC5200) -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE #else -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 +#define CONFIG_SYS_HID0_INIT 0 +#define CONFIG_SYS_HID0_FINAL 0 #endif -#define CFG_BOOTCS_START CFG_FLASH_BASE -#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#ifdef CFG_PCICLK_EQUALS_IPBCLK_DIV2 -#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 +#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ #else -#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ #endif -#define CFG_CS0_START CFG_FLASH_BASE -#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE #define CONFIG_LAST_STAGE_INIT @@ -652,34 +652,34 @@ * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#define CFG_CS2_START 0xE5000000 -#define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#define CFG_CS2_CFG 0x0004D930 +#define CONFIG_SYS_CS2_START 0xE5000000 +#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ +#define CONFIG_SYS_CS2_CFG 0x0004D930 /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ #define SM501_FB_BASE 0xE0000000 -#define CFG_CS1_START (SM501_FB_BASE) -#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ -#define CFG_CS1_CFG 0x8F48FF70 -#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 +#define CONFIG_SYS_CS1_START (SM501_FB_BASE) +#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ +#define CONFIG_SYS_CS1_CFG 0x8F48FF70 +#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 -#define CFG_CS_BURST 0x00000000 -#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ #if defined(CONFIG_CAM5200) -#define CFG_CS4_START 0xB0000000 -#define CFG_CS4_SIZE 0x00010000 -#define CFG_CS4_CFG 0x01019C10 +#define CONFIG_SYS_CS4_START 0xB0000000 +#define CONFIG_SYS_CS4_SIZE 0x00010000 +#define CONFIG_SYS_CS4_CFG 0x01019C10 -#define CFG_CS5_START 0xD0000000 -#define CFG_CS5_SIZE 0x01208000 -#define CFG_CS5_CFG 0x1414BF10 +#define CONFIG_SYS_CS5_START 0xD0000000 +#define CONFIG_SYS_CS5_SIZE 0x01208000 +#define CONFIG_SYS_CS5_CFG 0x1414BF10 #endif -#define CFG_RESET_ADDRESS 0xff000000 +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 /*----------------------------------------------------------------------- * USB stuff @@ -701,24 +701,24 @@ #define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ -#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (0x0060) +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET (0x005C) +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* Interval between registers */ -#define CFG_ATA_STRIDE 4 +#define CONFIG_SYS_ATA_STRIDE 4 /* Support ATAPI devices */ #define CONFIG_ATAPI 1 -- cgit v1.1