From 8bde7f776c77b343aca29b8c7b58464d915ac245 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 27 Jun 2003 21:31:46 +0000 Subject: * Code cleanup: - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen) --- include/cmd_bsp.h | 318 +----------------------------------------------------- 1 file changed, 1 insertion(+), 317 deletions(-) (limited to 'include/cmd_bsp.h') diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h index 008008a..417d32f 100644 --- a/include/cmd_bsp.h +++ b/include/cmd_bsp.h @@ -24,322 +24,6 @@ #ifndef _CMD_BSP_H_ #define _CMD_BSP_H_ -#include -#include - -#if (CONFIG_COMMANDS & CFG_CMD_BSP) - -/* ----- LWMON --------------------------------------------------------- - */ -#if defined(CONFIG_LWMON) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "pic", 3, 4, 1, do_pic, \ - "pic - read and write PIC registers\n", \ - "read reg - read PIC register `reg'\n" \ - "pic write reg val - write value `val' to PIC register `reg'\n" \ -), MK_CMD_TBL_ENTRY( \ - "kbd", 3, 1, 1, do_kbd, \ - "kbd - read keyboard status\n", \ - NULL \ -), MK_CMD_TBL_ENTRY( \ - "lsb", 3, 2, 1, do_lsb, \ - "lsb - check and set LSB switch\n", \ - "on - switch LSB on\n" \ - "lsb off - switch LSB off\n" \ - "lsb - print current setting\n" \ -), -int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_LWMON */ -/* -------------------------------------------------------------------- */ - -/* ----- PCU E -------------------------------------------------------- */ -#if defined(CONFIG_PCU_E) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "puma", 4, 4, 1, do_puma, \ - "puma - access PUMA FPGA\n", \ - "status - print PUMA status\n" \ - "puma load addr len - load PUMA configuration data\n" \ -), -int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_PCU_E */ -/* -------------------------------------------------------------------- */ - -/* ----- CCM/SCM ------------------------------------------------------ */ -#if defined(CONFIG_CCM) || defined(CONFIG_SCM) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "fpga", 4, 4, 1, do_fpga, \ - "fpga - access FPGA(s)\n", \ - "fpga status [name] - print FPGA status\n" \ - "fpga reset [name] - reset FPGA\n" \ - "fpga load [name] addr - load FPGA configuration data\n" \ -), -int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_CCM, CONFIG_SCM */ -/* -------------------------------------------------------------------- */ - -/* ----- PIP405 ------------------------------------------------------- */ -#if defined(CONFIG_PIP405) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "pip405", 4, 6, 1, do_pip405, \ - "pip405 - PIP405 specific Cmds\n", \ - "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \ - "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" \ - "pip405 flash mps - updates U-Boot with image from MPS\n" \ -), -int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_PIP405 */ -/* -------------------------------------------------------------------- */ - -/* ----- MIP405 ------------------------------------------------------- */ -#if defined(CONFIG_MIP405) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "mip405", 4, 6, 1, do_mip405, \ - "mip405 - MIP405 specific Cmds\n", \ - "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \ - "mip405 flash mps - updates U-Boot with image from MPS\n" \ -), -int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_MIP405 */ -/* ----- VCMA9 ----------------------------------------------------------------- - */ -#if defined(CONFIG_VCMA9) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "vcma9", 4, 6, 1, do_vcma9, \ - "vcma9 - VCMA9 specific Cmds\n", \ - "flash mem [SrcAddr] - updates U-Boot with image in memory\n" \ -), -int do_vcma9 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_VCMA9 */ -/* ----------------------------------------------------------------------------*/ - -/* ----- DASA_SIM ----------------------------------------------------- */ -#if defined(CONFIG_DASA_SIM) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "pci9054", 7, 3, 1, do_pci9054, \ - "pci9054 - PLX PCI9054 EEPROM access\n", \ - "pci9054 info - print EEPROM values\n" \ - "pci9054 update - updates EEPROM with default values\n" \ -), -int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_DASA_SIM */ -/* -------------------------------------------------------------------- */ - -/* ----- HYMOD -------------------------------------------------------- */ -#if defined(CONFIG_HYMOD) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "fpga", 4, 6, 1, do_fpga, \ - "fpga - FPGA sub-system\n", \ - "load [type] addr size\n" \ - " - write the configuration data at memory address `addr',\n" \ - " size `size' bytes, into the FPGA of type `type' (either\n" \ - " `main' or `mezz', default `main'). e.g.\n" \ - " `fpga load 100000 7d8f'\n" \ - " loads the main FPGA with config data at address 100000\n" \ - " HEX, size 7d8f HEX (32143 DEC) bytes\n" \ - "fpga tftp file addr\n" \ - " - transfers `file' from the tftp server into memory at\n" \ - " address `addr', then writes the entire file contents\n" \ - " into the main FPGA\n" \ - "fpga store addr\n" \ - " - read configuration data from the main FPGA (the mezz\n" \ - " FPGA is write-only), into address `addr'. There must be\n" \ - " enough memory available at `addr' to hold all the config\n"\ - " data - the size of which is determined by VC:???\n" \ - "fpga info\n" \ - " - print information about the Hymod FPGA, namely the\n" \ - " memory addresses at which the four FPGA local bus\n" \ - " address spaces appear in the physical address space\n" \ -), MK_CMD_TBL_ENTRY( \ - "eeclear", 4, 1, 0, do_eecl, \ - "eeclear - Clear the eeprom on a Hymod board\n", \ - "[type]\n" \ - " - write zeroes into the EEPROM on the board of type `type'\n"\ - " (`type' is either `main' or `mezz' - default `main')\n" \ - " Note: the EEPROM write enable jumper must be installed\n" \ -), MK_CMD_TBL_ENTRY( \ - "htest", 5, 1, 0, do_htest, \ - "htest - run HYMOD tests\n", \ - NULL \ -), - -int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_htest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_HYMOD */ -/* -------------------------------------------------------------------- */ - -/* ----- CRAY405 (L1) ------------------------------------------------- */ -#if defined (CONFIG_CRAYL1) -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "L1cmd", 5, 4, 1, do_crayL1, \ - "L1cmd - L1 update, setup, commands \n", \ - "L1cmd update - update flash images from host\n" \ - "L1cmd boot - nfs or ramboot L1\n" \ -), -int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -#endif /* CONFIG_CRAY405 */ -/* -------------------------------------------------------------------- */ - -/* ----- EVB64260 ----------------------------------------------------- */ -#if defined (CONFIG_EVB64260) -#ifdef CONFIG_ZUMA_V2 -#define CMD_TBL_BSP ZUMA_TBL_ENTRY - -#define ZUMA_TBL_ENTRY MK_CMD_TBL_ENTRY( \ - "zinit", 5, 1, 0, do_zuma_init_pbb, \ - "zinit - init zuma pbb\n", \ - "\n" \ - " - init zuma pbb\n" \ -), MK_CMD_TBL_ENTRY( \ - "zdtest", 6, 3, 1, do_zuma_test_dma, \ - "zdtest - run dma test\n", \ - "[cmd [count]]\n" \ - " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \ -), MK_CMD_TBL_ENTRY( \ - "zminit", 5, 1, 0, do_zuma_init_mbox, \ - "zminit - init zuma mbox\n", \ - "\n" \ - " - init zuma mbox\n" \ -), - -int do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); -int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -void zuma_init_pbb(void); -int zuma_mbox_init(void); -int zuma_test_dma(int cmd, int size); -#else -#define CMD_TBL_BSP -#endif /* ZUMA_NTL */ - -#endif /* CONFIG_EVB64260 */ -/* -------------------------------------------------------------------- */ - -/* -----W7O------------------------------------------------------------ */ -#if defined(CONFIG_W7O) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "vpd", 3, 2, 1, do_vpd, \ - "vpd - Read Vital Product Data\n", \ - "[dev_addr]\n" \ - " - Read VPD Data from default address, or device address 'dev_addr'.\n" \ -), - -extern int do_vpd (cmd_tbl_t *, int, int, char *[]); - -#endif /* CONFIG_W7O */ -/* -------------------------------------------------------------------- */ - -/* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */ -#if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6) -#if defined(CONFIG_WATCHDOG) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "wd", 3, 2, 1, do_wd, \ - "wd - check and set watchdog\n", \ - "on - switch watchDog on\n" \ - "wd off - switch watchdog off\n" \ - "wd - print current status\n" \ -), - -extern int do_wd (cmd_tbl_t *, int, int, char *[]); - -#else -#define CMD_TBL_BSP -#endif /* CONFIG_WATCHDOG */ - -#endif /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */ -/* -------------------------------------------------------------------- */ - -/* ----- PN62 --------------------------------------------------------- */ -#if defined(CONFIG_PN62) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "loadpci", 5, 2, 1, do_loadpci, \ - "loadpci - load binary file over PCI\n", \ - "[addr]\n" \ - " - load binary file over PCI to address 'addr'\n" \ -), MK_CMD_TBL_ENTRY( \ - "led" , 3, 3, 1, do_led, \ - "led - set LED 0..11 on the PN62 board\n", \ - "i fun\n" \ - " - set 'i'th LED to function 'fun'\n" \ -), - -extern int do_loadpci (cmd_tbl_t *, int, int, char *[]); -extern int do_led (cmd_tbl_t *, int, int, char *[]); -#endif /* CONFIG_PN62 */ -/* -------------------------------------------------------------------- */ - -/* ----- TRAB --------------------------------------------------------- */ -#if defined(CONFIG_TRAB) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "kbd", 3, 1, 1, do_kbd, \ - "kbd - read keyboard status\n", \ - NULL \ -), - -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_TRAB */ -/* -------------------------------------------------------------------- */ - -/* ----- R360MPI ------------------------------------------------------ */ -#if defined(CONFIG_R360MPI) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "kbd", 3, 1, 1, do_kbd, \ - "kbd - read keyboard status\n", \ - NULL \ -), - -int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_R360MPI */ -/* -------------------------------------------------------------------- */ - -/* ------ AMIGAONEG3SE ------------------------------------------------ */ -#if defined(CONFIG_AMIGAONEG3SE) - -#define CMD_TBL_BSP /* dummy */ - -#endif /* AmigaOneG3SE */ -/* ----- PCI405 ------------------------------------------------------- */ -#if defined(CONFIG_PCI405) - -#define CMD_TBL_BSP MK_CMD_TBL_ENTRY( \ - "loadpci", 7, 1, 1, do_loadpci, \ - "loadpci - wait for sync and boot image\n", \ - NULL \ -), - -int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); - -#endif /* CONFIG_PCI405 */ -/* -------------------------------------------------------------------- */ - -#else -#define CMD_TBL_BSP -#endif /* CFG_CMD_BSP */ +/* do not edit this file */ #endif /* _CMD_BSP_H_ */ -- cgit v1.1