From 6310eb9da74b1cf33194ae88275cc63b76e7a764 Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Sun, 9 Jan 2005 21:28:15 +0000
Subject: Patches by David Snowdon, 07 Sep 2004: - add u-boot.hex target in the
 top level Makefile - add support for the UNSW/NICTA PLEB 2 board (pleb2) -
 use -mtune=xscale and -march=armv5 options for PXA

---
 include/asm-arm/arch-pxa/hardware.h | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'include/asm-arm/arch-pxa/hardware.h')

diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index a76a029..3ff1d26 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -84,10 +84,10 @@ typedef struct { volatile u32 offset[4096]; } __regbase;
 # define __REG(x)	io_p2v(x)
 # define __PREG(x)	io_v2p(x)
 
-# undef	io_p2v
+# undef io_p2v
 # undef __REG
 # ifndef __ASSEMBLY__
-#  define io_p2v(PhAdd)    (PhAdd)
+#  define io_p2v(PhAdd)	   (PhAdd)
 #  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
 #  define __REG2(x,y)	(*(volatile u32 *)((u32)&__REG(x) + (y)))
 # else
@@ -105,9 +105,9 @@ typedef struct { volatile u32 offset[4096]; } __regbase;
  * This must be called *before* the corresponding IRQ is registered.
  * Use this instead of directly setting GRER/GFER.
  */
-#define GPIO_FALLING_EDGE       1
-#define GPIO_RISING_EDGE        2
-#define GPIO_BOTH_EDGES         3
+#define GPIO_FALLING_EDGE	1
+#define GPIO_RISING_EDGE	2
+#define GPIO_BOTH_EDGES		3
 extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
 
 /*
@@ -147,4 +147,8 @@ extern unsigned int get_lclk_frequency_10khz(void);
 #include "innokom.h"
 #endif
 
-#endif  /* _ASM_ARCH_HARDWARE_H */
+#ifdef CONFIG_ARCH_PLEB
+#include "pleb.h"
+#endif
+
+#endif	/* _ASM_ARCH_HARDWARE_H */
-- 
cgit v1.1