From 869833285b48fd51e0319ff2cede2744331a1e10 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 6 Jul 2012 21:25:55 +0000 Subject: MX28: Split out the PIO and DMA transfer functions Move DMA and PIO data transfer parts into separate functions. Signed-off-by: Marek Vasut Cc: Wolfgang Denk Cc: Stefano Babic Cc: Fabio Estevam Cc: Andy Fleming --- drivers/mmc/mxsmmc.c | 154 ++++++++++++++++++++++++++++----------------------- 1 file changed, 86 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index 2480a8a..8e2016f 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -62,6 +62,85 @@ struct mxsmmc_priv { #define MXSMMC_MAX_TIMEOUT 10000 +#ifndef CONFIG_MXS_MMC_DMA +static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data) +{ + struct mxs_ssp_regs *ssp_regs = priv->regs; + uint32_t *data_ptr; + int timeout = MXSMMC_MAX_TIMEOUT; + uint32_t reg; + uint32_t data_count = data->blocksize * data->blocks; + + if (data->flags & MMC_DATA_READ) { + data_ptr = (uint32_t *)data->dest; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_EMPTY)) { + *data_ptr++ = readl(&ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } else { + data_ptr = (uint32_t *)data->src; + timeout *= 100; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_FULL)) { + writel(*data_ptr++, &ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } + + return timeout ? 0 : COMM_ERR; +} +#else +static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) +{ + uint32_t data_count = data->blocksize * data->blocks; + uint32_t cache_data_count; + int dmach; + + if (data_count % ARCH_DMA_MINALIGN) + cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); + else + cache_data_count = data_count; + + if (data->flags & MMC_DATA_READ) { + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; + priv->desc->cmd.address = (dma_addr_t)data->dest; + } else { + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; + priv->desc->cmd.address = (dma_addr_t)data->src; + + /* Flush data to DRAM so DMA can pick them up */ + flush_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); + } + + priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | + (data_count << MXS_DMA_DESC_BYTES_OFFSET); + + + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; + mxs_dma_desc_append(dmach, priv->desc); + if (mxs_dma_go(dmach)) + return COMM_ERR; + + /* The data arrived into DRAM, invalidate cache over them */ + if (data->flags & MMC_DATA_READ) { + invalidate_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); + } + + return 0; +} +#endif + /* * Sends a command out on the bus. Takes the mmc pointer, * a command pointer, and an optional data pointer. @@ -73,14 +152,8 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) struct mxs_ssp_regs *ssp_regs = priv->regs; uint32_t reg; int timeout; - uint32_t data_count; uint32_t ctrl0; -#ifndef CONFIG_MXS_MMC_DMA - uint32_t *data_ptr; -#else - uint32_t cache_data_count; - int dmach; -#endif + int ret; debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); @@ -198,77 +271,22 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (!data) return 0; - data_count = data->blocksize * data->blocks; - timeout = MXSMMC_MAX_TIMEOUT; - #ifdef CONFIG_MXS_MMC_DMA writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set); - if (data_count % ARCH_DMA_MINALIGN) - cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); - else - cache_data_count = data_count; - - if (data->flags & MMC_DATA_READ) { - priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; - priv->desc->cmd.address = (dma_addr_t)data->dest; - } else { - priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; - priv->desc->cmd.address = (dma_addr_t)data->src; - - /* Flush data to DRAM so DMA can pick them up */ - flush_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); - } - - priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | - (data_count << MXS_DMA_DESC_BYTES_OFFSET); - - - dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; - mxs_dma_desc_append(dmach, priv->desc); - if (mxs_dma_go(dmach)) { + ret = mxsmmc_send_cmd_dma(priv, data); + if (ret) { printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev); - return COMM_ERR; - } - - /* The data arrived into DRAM, invalidate cache over them */ - if (data->flags & MMC_DATA_READ) { - invalidate_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); + return ret; } #else writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr); - if (data->flags & MMC_DATA_READ) { - data_ptr = (uint32_t *)data->dest; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_EMPTY)) { - *data_ptr++ = readl(&ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); - } - } else { - data_ptr = (uint32_t *)data->src; - timeout *= 100; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_FULL)) { - writel(*data_ptr++, &ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); - } - } - - if (!timeout) { + ret = mxsmmc_send_cmd_pio(priv, data); + if (ret) { printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n", mmc->block_dev.dev, cmd->cmdidx, reg); - return COMM_ERR; + return ret; } #endif -- cgit v1.1