From 7fbeb6422d9fb32063c8357fcdee99f0088a1a7f Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Wed, 1 Jun 2011 07:35:13 +0100 Subject: sh: Add Renesas rsk7264 board The rsk7264 (also know as rsk2+sh7264) is an SH2A based board with 64MB NAND flash and 64MB SDRAM. It is very similar to the rsk7203 board. Signed-off-by: Phil Edworthy Cc: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- drivers/serial/serial_sh.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index e19593c..4e16e48 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -177,7 +177,8 @@ struct uart_port { #elif defined(CONFIG_CPU_SH7201) || \ defined(CONFIG_CPU_SH7203) || \ defined(CONFIG_CPU_SH7206) || \ - defined(CONFIG_CPU_SH7263) + defined(CONFIG_CPU_SH7263) || \ + defined(CONFIG_CPU_SH7264) # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ @@ -685,6 +686,8 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) +#elif defined(CONFIG_CPU_SH7264) +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)) #else /* Generic SH */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif -- cgit v1.1