From 3ee9d15fd8d836cdc6469c042ccc2c2c36875144 Mon Sep 17 00:00:00 2001 From: "Aisheng.Dong" Date: Tue, 1 Jun 2010 19:49:50 +0800 Subject: ENGR00123484 mx28:support saving environment into sd1 Original uboot did not support sd1 and can only save environment into sd0 even actually you're booting from sd1. This patch adds the capability of saving environment into sd1 when you're booting from sd1. Signed-off-by: Aisheng.Dong --- drivers/mmc/imx_ssp_mmc.c | 171 +++++++++++++++++++++++++--------------------- 1 file changed, 93 insertions(+), 78 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/imx_ssp_mmc.c b/drivers/mmc/imx_ssp_mmc.c index 51a931c..fc480a5 100644 --- a/drivers/mmc/imx_ssp_mmc.c +++ b/drivers/mmc/imx_ssp_mmc.c @@ -32,11 +32,21 @@ #include #include #include +#include #undef IMX_SSP_MMC_DEBUG -extern void ssp_mmc_board_init(void); -extern u32 ssp_mmc_is_wp(void); +static inline int ssp_mmc_read(struct mmc *mmc, uint reg) +{ + struct imx_ssp_mmc_cfg *cfg = (struct imx_ssp_mmc_cfg *)mmc->priv; + return REG_RD(cfg->ssp_mmc_base, reg); +} + +static inline void ssp_mmc_write(struct mmc *mmc, uint reg, uint val) +{ + struct imx_ssp_mmc_cfg *cfg = (struct imx_ssp_mmc_cfg *)mmc->priv; + REG_WR(cfg->ssp_mmc_base, reg, val); +} static inline void mdelay(unsigned long msec) { @@ -62,106 +72,112 @@ ssp_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) int i; #ifdef IMX_SSP_MMC_DEBUG - printf("MMC: CMD%d\n", cmd->cmdidx); + printf("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); #endif /* Check bus busy */ i = 0; - while (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & (BM_SSP_STATUS_BUSY | + while (ssp_mmc_read(mmc, HW_SSP_STATUS) & (BM_SSP_STATUS_BUSY | BM_SSP_STATUS_DATA_BUSY | BM_SSP_STATUS_CMD_BUSY)) { mdelay(1); i++; if (i == 1000) { - printf("MMC: Bus busy timeout!\n"); + printf("MMC%d: Bus busy timeout!\n", + mmc->block_dev.dev); return TIMEOUT; } } /* See if card is present */ - if (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & BM_SSP_STATUS_CARD_DETECT) { - printf("MMC: No card detected!\n"); + if (ssp_mmc_read(mmc, HW_SSP_STATUS) & BM_SSP_STATUS_CARD_DETECT) { + printf("MMC%d: No card detected!\n", mmc->block_dev.dev); return NO_CARD_ERR; } /* Clear all control bits except bus width */ - REG_CLR(REGS_SSP0_BASE, HW_SSP_CTRL0, 0xff3fffff); + ssp_mmc_write(mmc, HW_SSP_CTRL0_CLR, 0xff3fffff); /* Set up command */ if (!(cmd->resp_type & MMC_RSP_CRC)) - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_IGNORE_CRC); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_IGNORE_CRC); if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */ - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_GET_RESP); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_GET_RESP); if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */ - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_LONG_RESP); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_LONG_RESP); /* Command index */ - REG_WR(REGS_SSP0_BASE, HW_SSP_CMD0, - (REG_RD(REGS_SSP0_BASE, HW_SSP_CMD0) & ~BM_SSP_CMD0_CMD) | + ssp_mmc_write(mmc, HW_SSP_CMD0, + (ssp_mmc_read(mmc, HW_SSP_CMD0) & ~BM_SSP_CMD0_CMD) | (cmd->cmdidx << BP_SSP_CMD0_CMD)); /* Command argument */ - REG_WR(REGS_SSP0_BASE, HW_SSP_CMD1, cmd->cmdarg); + ssp_mmc_write(mmc, HW_SSP_CMD1, cmd->cmdarg); /* Set up data */ if (data) { /* READ or WRITE */ if (data->flags & MMC_DATA_READ) { - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_READ); - } else if (ssp_mmc_is_wp()) { - printf("MMC: Can not write a locked card!\n"); + } else if (ssp_mmc_is_wp(mmc)) { + printf("MMC%d: Can not write a locked card!\n", + mmc->block_dev.dev); return UNUSABLE_ERR; } - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_DATA_XFER); - REG_WR(REGS_SSP0_BASE, HW_SSP_BLOCK_SIZE, + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_DATA_XFER); + ssp_mmc_write(mmc, HW_SSP_BLOCK_SIZE, ((data->blocks - 1) << BP_SSP_BLOCK_SIZE_BLOCK_COUNT) | ((ffs(data->blocksize) - 1) << BP_SSP_BLOCK_SIZE_BLOCK_SIZE)); - REG_WR(REGS_SSP0_BASE, HW_SSP_XFER_SIZE, + ssp_mmc_write(mmc, HW_SSP_XFER_SIZE, data->blocksize * data->blocks); } /* Kick off the command */ - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_WAIT_FOR_IRQ); - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_ENABLE); - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_WAIT_FOR_IRQ); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_ENABLE); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_RUN); /* Wait for the command to complete */ i = 0; do { mdelay(10); if (i++ == 100) { - printf("MMC: Command %d busy\n", cmd->cmdidx); + printf("MMC%d: Command %d busy\n", + mmc->block_dev.dev, + cmd->cmdidx); break; } - } while (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + } while (ssp_mmc_read(mmc, HW_SSP_STATUS) & BM_SSP_STATUS_CMD_BUSY); /* Check command timeout */ - if (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + if (ssp_mmc_read(mmc, HW_SSP_STATUS) & BM_SSP_STATUS_RESP_TIMEOUT) { #ifdef IMX_SSP_MMC_DEBUG - printf("MMC: Command %d timeout\n", cmd->cmdidx); + printf("MMC%d: Command %d timeout\n", mmc->block_dev.dev, + cmd->cmdidx); #endif return TIMEOUT; } /* Check command errors */ - if (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + if (ssp_mmc_read(mmc, HW_SSP_STATUS) & (BM_SSP_STATUS_RESP_CRC_ERR | BM_SSP_STATUS_RESP_ERR)) { - printf("MMC: Command %d error (status 0x%08x)!\n", - cmd->cmdidx, REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS)); + printf("MMC%d: Command %d error (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, + ssp_mmc_read(mmc, HW_SSP_STATUS)); return COMM_ERR; } /* Copy response to response buffer */ if (cmd->resp_type & MMC_RSP_136) { - cmd->response[3] = REG_RD(REGS_SSP0_BASE, HW_SSP_SDRESP0); - cmd->response[2] = REG_RD(REGS_SSP0_BASE, HW_SSP_SDRESP1); - cmd->response[1] = REG_RD(REGS_SSP0_BASE, HW_SSP_SDRESP2); - cmd->response[0] = REG_RD(REGS_SSP0_BASE, HW_SSP_SDRESP3); + cmd->response[3] = ssp_mmc_read(mmc, HW_SSP_SDRESP0); + cmd->response[2] = ssp_mmc_read(mmc, HW_SSP_SDRESP1); + cmd->response[1] = ssp_mmc_read(mmc, HW_SSP_SDRESP2); + cmd->response[0] = ssp_mmc_read(mmc, HW_SSP_SDRESP3); } else - cmd->response[0] = REG_RD(REGS_SSP0_BASE, HW_SSP_SDRESP0); + cmd->response[0] = ssp_mmc_read(mmc, HW_SSP_SDRESP0); /* Return if no data to process */ if (!data) @@ -174,36 +190,37 @@ ssp_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { tmp_ptr = (u32 *)data->dest; while (xfer_cnt > 0) { - if ((REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + if ((ssp_mmc_read(mmc, HW_SSP_STATUS) & BM_SSP_STATUS_FIFO_EMPTY) == 0) { - *tmp_ptr++ = REG_RD(REGS_SSP0_BASE, HW_SSP_DATA); + *tmp_ptr++ = ssp_mmc_read(mmc, HW_SSP_DATA); xfer_cnt -= 4; } } } else { tmp_ptr = (u32 *)data->src; while (xfer_cnt > 0) { - if ((REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + if ((ssp_mmc_read(mmc, HW_SSP_STATUS) & BM_SSP_STATUS_FIFO_FULL) == 0) { - REG_WR(REGS_SSP0_BASE, HW_SSP_DATA, *tmp_ptr++); + ssp_mmc_write(mmc, HW_SSP_DATA, *tmp_ptr++); xfer_cnt -= 4; } } } /* Check data errors */ - if (REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS) & + if (ssp_mmc_read(mmc, HW_SSP_STATUS) & (BM_SSP_STATUS_TIMEOUT | BM_SSP_STATUS_DATA_CRC_ERR | BM_SSP_STATUS_FIFO_OVRFLW | BM_SSP_STATUS_FIFO_UNDRFLW)) { - printf("MMC: Data error with command %d (status 0x%08x)!\n", - cmd->cmdidx, REG_RD(REGS_SSP0_BASE, HW_SSP_STATUS)); + printf("MMC%d: Data error with command %d (status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, + ssp_mmc_read(mmc, HW_SSP_STATUS)); return COMM_ERR; } return 0; } -static void set_bit_clock(u32 clock) +static void set_bit_clock(struct mmc *mmc, u32 clock) { const u32 sspclk = 480000 * 18 / 29 / 1; /* 297931 KHz */ u32 divide, rate, tgtclk; @@ -229,13 +246,13 @@ static void set_bit_clock(u32 clock) rate = 256; /* Always set timeout the maximum */ - REG_WR(REGS_SSP0_BASE, HW_SSP_TIMING, BM_SSP_TIMING_TIMEOUT | + ssp_mmc_write(mmc, HW_SSP_TIMING, BM_SSP_TIMING_TIMEOUT | divide << BP_SSP_TIMING_CLOCK_DIVIDE | (rate - 1) << BP_SSP_TIMING_CLOCK_RATE); #ifdef IMX_SSP_MMC_DEBUG - printf("MMC: Set clock rate to %d KHz (requested %d KHz)\n", - tgtclk, clock); + printf("MMC%d: Set clock rate to %d KHz (requested %d KHz)\n", + mmc->block_dev.dev, tgtclk, clock); #endif } @@ -245,10 +262,10 @@ static void ssp_mmc_set_ios(struct mmc *mmc) /* Set the clock speed */ if (mmc->clock) - set_bit_clock(mmc->clock); + set_bit_clock(mmc, mmc->clock); /* Set the bus width */ - regval = REG_RD(REGS_SSP0_BASE, HW_SSP_CTRL0); + regval = ssp_mmc_read(mmc, HW_SSP_CTRL0); regval &= ~BM_SSP_CTRL0_BUS_WIDTH; switch (mmc->bus_width) { case 1: @@ -263,20 +280,19 @@ static void ssp_mmc_set_ios(struct mmc *mmc) regval |= (BV_SSP_CTRL0_BUS_WIDTH__EIGHT_BIT << BP_SSP_CTRL0_BUS_WIDTH); } - REG_WR(REGS_SSP0_BASE, HW_SSP_CTRL0, regval); + ssp_mmc_write(mmc, HW_SSP_CTRL0, regval); #ifdef IMX_SSP_MMC_DEBUG - printf("MMC: Set %d bits bus width\n", mmc->bus_width); + printf("MMC%d: Set %d bits bus width\n", + mmc->block_dev.dev, mmc->bus_width); #endif } static int ssp_mmc_init(struct mmc *mmc) { + struct imx_ssp_mmc_cfg *cfg = (struct imx_ssp_mmc_cfg *)mmc->priv; u32 regval; - /* Board level init */ - ssp_mmc_board_init(); - /* * Set up SSPCLK */ @@ -288,65 +304,66 @@ static int ssp_mmc_init(struct mmc *mmc) /* Enable REF_IO0 */ REG_CLR(REGS_CLKCTRL_BASE, HW_CLKCTRL_FRAC0, BM_CLKCTRL_FRAC0_CLKGATEIO0); + /* Source SSPCLK from REF_IO0 */ REG_CLR(REGS_CLKCTRL_BASE, HW_CLKCTRL_CLKSEQ, - BM_CLKCTRL_CLKSEQ_BYPASS_SSP0); + cfg->clkctrl_clkseq_ssp_offset); /* Turn on SSPCLK */ - REG_WR(REGS_CLKCTRL_BASE, HW_CLKCTRL_SSP0, - REG_RD(REGS_CLKCTRL_BASE, HW_CLKCTRL_SSP0) & - ~BM_CLKCTRL_SSP0_CLKGATE); + REG_WR(REGS_CLKCTRL_BASE, cfg->clkctrl_ssp_offset, + REG_RD(REGS_CLKCTRL_BASE, cfg->clkctrl_ssp_offset) & + ~BM_CLKCTRL_SSP_CLKGATE); /* Set SSPCLK divide 1 */ - regval = REG_RD(REGS_CLKCTRL_BASE, HW_CLKCTRL_SSP0); - regval &= ~(BM_CLKCTRL_SSP0_DIV_FRAC_EN | BM_CLKCTRL_SSP0_DIV); - REG_WR(REGS_CLKCTRL_BASE, HW_CLKCTRL_SSP0, - regval | (1 << BP_CLKCTRL_SSP0_DIV)); + regval = REG_RD(REGS_CLKCTRL_BASE, cfg->clkctrl_ssp_offset); + regval &= ~(BM_CLKCTRL_SSP_DIV_FRAC_EN | BM_CLKCTRL_SSP_DIV); + REG_WR(REGS_CLKCTRL_BASE, cfg->clkctrl_ssp_offset, + regval | (1 << BP_CLKCTRL_SSP_DIV)); /* Wait for new divide ready */ do { udelay(10); - } while (REG_RD(REGS_CLKCTRL_BASE, HW_CLKCTRL_SSP0) & - BM_CLKCTRL_SSP0_BUSY); + } while (REG_RD(REGS_CLKCTRL_BASE, cfg->clkctrl_ssp_offset) & + BM_CLKCTRL_SSP_BUSY); /* Prepare for software reset */ - REG_CLR(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_SFTRST); - REG_CLR(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_CLKGATE); + ssp_mmc_write(mmc, HW_SSP_CTRL0_CLR, BM_SSP_CTRL0_SFTRST); + ssp_mmc_write(mmc, HW_SSP_CTRL0_CLR, BM_SSP_CTRL0_CLKGATE); /* Assert reset */ - REG_SET(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_SFTRST); + ssp_mmc_write(mmc, HW_SSP_CTRL0_SET, BM_SSP_CTRL0_SFTRST); /* Wait for confirmation */ - while (!(REG_RD(REGS_SSP0_BASE, HW_SSP_CTRL0) & BM_SSP_CTRL0_CLKGATE)) + while (!(ssp_mmc_read(mmc, HW_SSP_CTRL0) & BM_SSP_CTRL0_CLKGATE)) ; /* Done */ - REG_CLR(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_SFTRST); - REG_CLR(REGS_SSP0_BASE, HW_SSP_CTRL0, BM_SSP_CTRL0_CLKGATE); + ssp_mmc_write(mmc, HW_SSP_CTRL0_CLR, BM_SSP_CTRL0_SFTRST); + ssp_mmc_write(mmc, HW_SSP_CTRL0_CLR, BM_SSP_CTRL0_CLKGATE); /* 8 bits word length in MMC mode */ - regval = REG_RD(REGS_SSP0_BASE, HW_SSP_CTRL1); + regval = ssp_mmc_read(mmc, HW_SSP_CTRL1); regval &= ~(BM_SSP_CTRL1_SSP_MODE | BM_SSP_CTRL1_WORD_LENGTH); - REG_WR(REGS_SSP0_BASE, HW_SSP_CTRL1, regval | + ssp_mmc_write(mmc, HW_SSP_CTRL1, regval | (BV_SSP_CTRL1_SSP_MODE__SD_MMC << BP_SSP_CTRL1_SSP_MODE) | (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS << BP_SSP_CTRL1_WORD_LENGTH)); /* Set initial bit clock 400 KHz */ - set_bit_clock(400000); + set_bit_clock(mmc, 400000); /* Send initial 74 clock cycles (185 us @ 400 KHz)*/ - REG_SET(REGS_SSP0_BASE, HW_SSP_CMD0, BM_SSP_CMD0_CONT_CLKING_EN); + ssp_mmc_write(mmc, HW_SSP_CMD0_SET, BM_SSP_CMD0_CONT_CLKING_EN); udelay(200); - REG_CLR(REGS_SSP0_BASE, HW_SSP_CMD0, BM_SSP_CMD0_CONT_CLKING_EN); + ssp_mmc_write(mmc, HW_SSP_CMD0_CLR, BM_SSP_CMD0_CONT_CLKING_EN); return 0; } -int imx_ssp_mmc_initialize(bd_t *bis) +int imx_ssp_mmc_initialize(bd_t *bis, struct imx_ssp_mmc_cfg *cfg) { struct mmc *mmc; mmc = malloc(sizeof(struct mmc)); - sprintf(mmc->name, "IMX_SSP_MMC"); mmc->send_cmd = ssp_mmc_send_cmd; mmc->set_ios = ssp_mmc_set_ios; mmc->init = ssp_mmc_init; + mmc->priv = cfg; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_31_32 | MMC_VDD_30_31 | MMC_VDD_29_30 | MMC_VDD_28_29 | MMC_VDD_27_28; @@ -364,7 +381,5 @@ int imx_ssp_mmc_initialize(bd_t *bis) mmc->f_max = 148000000; /* 297.731 MHz / 2 */ mmc_register(mmc); - return 0; } - -- cgit v1.1