From 189a6956ebbd7820afe5fa45a64ca495e6cefd9c Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Sun, 15 Jul 2012 04:43:49 +0000 Subject: ehci-hcd: fix external buffer cache handling Buffer coming from upper layers should be cacheline aligned/padded to perform safe cache operations. For now we don't do bounce buffering so getting unaligned buffer is an upper layer error. We can't check if the buffer is properly padded with current interface so just assume it is (consider changing with in the future). The following changes are done: 1. Remove useless length alignment check. We get actual transfer length not the size of the underlying buffer so it's perfectly valid for it to be unaligned. 2. Move flush_dcache_range() out of while loop or it will flush too much. 3. Don't try to fix buffer address before calling invalidate: if it's unaligned it's an error anyway so let cache subsystem cry about that. 4. Fix end buffer address to be cacheline aligned assuming upper layer reserved enough space. This is potentially dangerous operation so upper layers should be careful about that. Signed-off-by: Ilya Yanok --- drivers/usb/host/ehci-hcd.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 2b46662..3e808f6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -175,18 +175,15 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) { uint32_t delta, next; uint32_t addr = (uint32_t)buf; - size_t rsz = roundup(sz, 32); int idx; - if (sz != rsz) - debug("EHCI-HCD: Misaligned buffer size (%08x)\n", sz); - - if (addr & 31) + if (addr != ALIGN(addr, ARCH_DMA_MINALIGN)) debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf); + flush_dcache_range(addr, ALIGN(addr + sz, ARCH_DMA_MINALIGN)); + idx = 0; while (idx < 5) { - flush_dcache_range(addr, addr + rsz); td->qt_buffer[idx] = cpu_to_hc32(addr); td->qt_buffer_hi[idx] = 0; next = (addr + 4096) & ~4095; @@ -388,9 +385,17 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, WATCHDOG_RESET(); } while (get_timer(ts) < timeout); - /* Invalidate the memory area occupied by buffer */ - invalidate_dcache_range(((uint32_t)buffer & ~31), - ((uint32_t)buffer & ~31) + roundup(length, 32)); + /* + * Invalidate the memory area occupied by buffer + * Don't try to fix the buffer alignment, if it isn't properly + * aligned it's upper layer's fault so let invalidate_dcache_range() + * vow about it. But we have to fix the length as it's actual + * transfer length and can be unaligned. This is potentially + * dangerous operation, it's responsibility of the calling + * code to make sure enough space is reserved. + */ + invalidate_dcache_range((uint32_t)buffer, + ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN)); /* Check that the TD processing happened */ if (token & 0x80) { -- cgit v1.1