From 1853030e2164c849c09f1ba051d243265e2591ec Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Tue, 19 Mar 2013 04:58:56 +0000 Subject: x86: spi: Add Intel ICH driver This supports Intel ICH7/9. The Intel controller is a little unusual in that it is mostly intended for use with SPI flash, and has some optimisations and features specifically for that application. In particular it is not possible to support ongoing transactions that continue over many calls with SPI_XFER_BEGIN and SPI_XFER_END. This driver supports writes of up to 64 bytes at a time, the limit for the controller. Future work will improve this. Signed-off-by: Bernie Thompson Signed-off-by: Duncan Laurie Signed-off-by: Bill Richardson Signed-off-by: Vadim Bendebury Signed-off-by: Gabe Black Signed-off-by: Simon Glass --- drivers/spi/Makefile | 1 + drivers/spi/ich.c | 749 +++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/spi/ich.h | 143 ++++++++++ 3 files changed, 893 insertions(+) create mode 100644 drivers/spi/ich.c create mode 100644 drivers/spi/ich.h (limited to 'drivers') diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 45862ec..4268595 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,6 +39,7 @@ COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o +COBJS-$(CONFIG_ICH_SPI) += ich.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c new file mode 100644 index 0000000..ef1ce1d --- /dev/null +++ b/drivers/spi/ich.c @@ -0,0 +1,749 @@ +/* + * Copyright (c) 2011-12 The Chromium OS Authors. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file is derived from the flashrom project. + */ + +#include +#include +#include +#include +#include +#include + +#include "ich.h" + +#define SPI_OPCODE_WREN 0x06 +#define SPI_OPCODE_FAST_READ 0x0b + +struct ich_ctlr { + pci_dev_t dev; /* PCI device number */ + int ich_version; /* Controller version, 7 or 9 */ + int ichspi_lock; + int locked; + uint8_t *opmenu; + int menubytes; + void *base; /* Base of register set */ + uint16_t *preop; + uint16_t *optype; + uint32_t *addr; + uint8_t *data; + unsigned databytes; + uint8_t *status; + uint16_t *control; + uint32_t *bbar; + uint32_t *pr; /* only for ich9 */ + uint8_t *speed; /* pointer to speed control */ + ulong max_speed; /* Maximum bus speed in MHz */ +}; + +struct ich_ctlr ctlr; + +static inline struct ich_spi_slave *to_ich_spi(struct spi_slave *slave) +{ + return container_of(slave, struct ich_spi_slave, slave); +} + +static unsigned int ich_reg(const void *addr) +{ + return (unsigned)(addr - ctlr.base) & 0xffff; +} + +static u8 ich_readb(const void *addr) +{ + u8 value = readb(addr); + + debug("read %2.2x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static u16 ich_readw(const void *addr) +{ + u16 value = readw(addr); + + debug("read %4.4x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static u32 ich_readl(const void *addr) +{ + u32 value = readl(addr); + + debug("read %8.8x from %4.4x\n", value, ich_reg(addr)); + + return value; +} + +static void ich_writeb(u8 value, void *addr) +{ + writeb(value, addr); + debug("wrote %2.2x to %4.4x\n", value, ich_reg(addr)); +} + +static void ich_writew(u16 value, void *addr) +{ + writew(value, addr); + debug("wrote %4.4x to %4.4x\n", value, ich_reg(addr)); +} + +static void ich_writel(u32 value, void *addr) +{ + writel(value, addr); + debug("wrote %8.8x to %4.4x\n", value, ich_reg(addr)); +} + +static void write_reg(const void *value, void *dest, uint32_t size) +{ + memcpy_toio(dest, value, size); +} + +static void read_reg(const void *src, void *value, uint32_t size) +{ + memcpy_fromio(value, src, size); +} + +static void ich_set_bbar(struct ich_ctlr *ctlr, uint32_t minaddr) +{ + const uint32_t bbar_mask = 0x00ffff00; + uint32_t ichspi_bbar; + + minaddr &= bbar_mask; + ichspi_bbar = ich_readl(ctlr->bbar) & ~bbar_mask; + ichspi_bbar |= minaddr; + ich_writel(ichspi_bbar, ctlr->bbar); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + puts("spi_cs_is_valid used but not implemented\n"); + return 0; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct ich_spi_slave *ich; + + ich = spi_alloc_slave(struct ich_spi_slave, bus, cs); + if (!ich) { + puts("ICH SPI: Out of memory\n"); + return NULL; + } + + ich->speed = max_hz; + + return &ich->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct ich_spi_slave *ich = to_ich_spi(slave); + + free(ich); +} + +/* + * Check if this device ID matches one of supported Intel PCH devices. + * + * Return the ICH version if there is a match, or zero otherwise. + */ +static int get_ich_version(uint16_t device_id) +{ + if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC) + return 7; + + if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || + (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && + device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) + return 9; + + return 0; +} + +/* @return 1 if the SPI flash supports the 33MHz speed */ +static int ich9_can_do_33mhz(pci_dev_t dev) +{ + u32 fdod, speed; + + /* Observe SPI Descriptor Component Section 0 */ + pci_write_config_dword(dev, 0xb0, 0x1000); + + /* Extract the Write/Erase SPI Frequency from descriptor */ + pci_read_config_dword(dev, 0xb4, &fdod); + + /* Bits 23:21 have the fast read clock frequency, 0=20MHz, 1=33MHz */ + speed = (fdod >> 21) & 7; + + return speed == 1; +} + +static int ich_find_spi_controller(pci_dev_t *devp, int *ich_versionp) +{ + int last_bus = pci_last_busno(); + int bus; + + if (last_bus == -1) { + debug("No PCI busses?\n"); + return -1; + } + + for (bus = 0; bus <= last_bus; bus++) { + uint16_t vendor_id, device_id; + uint32_t ids; + pci_dev_t dev; + + dev = PCI_BDF(bus, 31, 0); + pci_read_config_dword(dev, 0, &ids); + vendor_id = ids; + device_id = ids >> 16; + + if (vendor_id == PCI_VENDOR_ID_INTEL) { + *devp = dev; + *ich_versionp = get_ich_version(device_id); + return 0; + } + } + + debug("ICH SPI: No ICH found.\n"); + return -1; +} + +static int ich_init_controller(struct ich_ctlr *ctlr) +{ + uint8_t *rcrb; /* Root Complex Register Block */ + uint32_t rcba; /* Root Complex Base Address */ + + pci_read_config_dword(ctlr->dev, 0xf0, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ + rcrb = (uint8_t *)(rcba & 0xffffc000); + if (ctlr->ich_version == 7) { + struct ich7_spi_regs *ich7_spi; + + ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020); + ctlr->ichspi_lock = ich_readw(&ich7_spi->spis) & SPIS_LOCK; + ctlr->opmenu = ich7_spi->opmenu; + ctlr->menubytes = sizeof(ich7_spi->opmenu); + ctlr->optype = &ich7_spi->optype; + ctlr->addr = &ich7_spi->spia; + ctlr->data = (uint8_t *)ich7_spi->spid; + ctlr->databytes = sizeof(ich7_spi->spid); + ctlr->status = (uint8_t *)&ich7_spi->spis; + ctlr->control = &ich7_spi->spic; + ctlr->bbar = &ich7_spi->bbar; + ctlr->preop = &ich7_spi->preop; + ctlr->base = ich7_spi; + } else if (ctlr->ich_version == 9) { + struct ich9_spi_regs *ich9_spi; + + ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800); + ctlr->ichspi_lock = ich_readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; + ctlr->opmenu = ich9_spi->opmenu; + ctlr->menubytes = sizeof(ich9_spi->opmenu); + ctlr->optype = &ich9_spi->optype; + ctlr->addr = &ich9_spi->faddr; + ctlr->data = (uint8_t *)ich9_spi->fdata; + ctlr->databytes = sizeof(ich9_spi->fdata); + ctlr->status = &ich9_spi->ssfs; + ctlr->control = (uint16_t *)ich9_spi->ssfc; + ctlr->speed = ich9_spi->ssfc + 2; + ctlr->bbar = &ich9_spi->bbar; + ctlr->preop = &ich9_spi->preop; + ctlr->pr = &ich9_spi->pr[0]; + ctlr->base = ich9_spi; + } else { + debug("ICH SPI: Unrecognized ICH version %d.\n", + ctlr->ich_version); + return -1; + } + debug("ICH SPI: Version %d detected\n", ctlr->ich_version); + + /* Work out the maximum speed we can support */ + ctlr->max_speed = 20000000; + if (ctlr->ich_version == 9 && ich9_can_do_33mhz(ctlr->dev)) + ctlr->max_speed = 33000000; + + ich_set_bbar(ctlr, 0); + + return 0; +} + +void spi_init(void) +{ + uint8_t bios_cntl; + + if (ich_find_spi_controller(&ctlr.dev, &ctlr.ich_version)) { + printf("ICH SPI: Cannot find device\n"); + return; + } + + if (ich_init_controller(&ctlr)) { + printf("ICH SPI: Cannot setup controller\n"); + return; + } + + /* + * Disable the BIOS write protect so write commands are allowed. On + * v9, deassert SMM BIOS Write Protect Disable. + */ + pci_read_config_byte(ctlr.dev, 0xdc, &bios_cntl); + if (ctlr.ich_version == 9) + bios_cntl &= ~(1 << 5); + pci_write_config_byte(ctlr.dev, 0xdc, bios_cntl | 0x1); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* Handled by ICH automatically. */ +} + +static inline void spi_use_out(struct spi_trans *trans, unsigned bytes) +{ + trans->out += bytes; + trans->bytesout -= bytes; +} + +static inline void spi_use_in(struct spi_trans *trans, unsigned bytes) +{ + trans->in += bytes; + trans->bytesin -= bytes; +} + +static void spi_setup_type(struct spi_trans *trans, int data_bytes) +{ + trans->type = 0xFF; + + /* Try to guess spi type from read/write sizes. */ + if (trans->bytesin == 0) { + if (trans->bytesout + data_bytes > 4) + /* + * If bytesin = 0 and bytesout > 4, we presume this is + * a write data operation, which is accompanied by an + * address. + */ + trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; + else + trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; + return; + } + + if (trans->bytesout == 1) { /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; + return; + } + + if (trans->bytesout == 4) /* and bytesin is > 0 */ + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + + /* Fast read command is called with 5 bytes instead of 4 */ + if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { + trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; + --trans->bytesout; + } +} + +static int spi_setup_opcode(struct spi_trans *trans) +{ + uint16_t optypes; + uint8_t opmenu[ctlr.menubytes]; + + trans->opcode = trans->out[0]; + spi_use_out(trans, 1); + if (!ctlr.ichspi_lock) { + /* The lock is off, so just use index 0. */ + ich_writeb(trans->opcode, ctlr.opmenu); + optypes = ich_readw(ctlr.optype); + optypes = (optypes & 0xfffc) | (trans->type & 0x3); + ich_writew(optypes, ctlr.optype); + return 0; + } else { + /* The lock is on. See if what we need is on the menu. */ + uint8_t optype; + uint16_t opcode_index; + + /* Write Enable is handled as atomic prefix */ + if (trans->opcode == SPI_OPCODE_WREN) + return 0; + + read_reg(ctlr.opmenu, opmenu, sizeof(opmenu)); + for (opcode_index = 0; opcode_index < ctlr.menubytes; + opcode_index++) { + if (opmenu[opcode_index] == trans->opcode) + break; + } + + if (opcode_index == ctlr.menubytes) { + printf("ICH SPI: Opcode %x not found\n", + trans->opcode); + return -1; + } + + optypes = ich_readw(ctlr.optype); + optype = (optypes >> (opcode_index * 2)) & 0x3; + if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && + optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && + trans->bytesout >= 3) { + /* We guessed wrong earlier. Fix it up. */ + trans->type = optype; + } + if (optype != trans->type) { + printf("ICH SPI: Transaction doesn't fit type %d\n", + optype); + return -1; + } + return opcode_index; + } +} + +static int spi_setup_offset(struct spi_trans *trans) +{ + /* Separate the SPI address and data. */ + switch (trans->type) { + case SPI_OPCODE_TYPE_READ_NO_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: + return 0; + case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: + case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: + trans->offset = ((uint32_t)trans->out[0] << 16) | + ((uint32_t)trans->out[1] << 8) | + ((uint32_t)trans->out[2] << 0); + spi_use_out(trans, 3); + return 1; + default: + printf("Unrecognized SPI transaction type %#x\n", trans->type); + return -1; + } +} + +/* + * Wait for up to 6s til status register bit(s) turn 1 (in case wait_til_set + * below is True) or 0. In case the wait was for the bit(s) to set - write + * those bits back, which would cause resetting them. + * + * Return the last read status value on success or -1 on failure. + */ +static int ich_status_poll(u16 bitmask, int wait_til_set) +{ + int timeout = 600000; /* This will result in 6s */ + u16 status = 0; + + while (timeout--) { + status = ich_readw(ctlr.status); + if (wait_til_set ^ ((status & bitmask) == 0)) { + if (wait_til_set) + ich_writew((status & bitmask), ctlr.status); + return status; + } + udelay(10); + } + + printf("ICH SPI: SCIP timeout, read %x, expected %x\n", + status, bitmask); + return -1; +} + +/* +int spi_xfer(struct spi_slave *slave, const void *dout, + unsigned int bitsout, void *din, unsigned int bitsin) +*/ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct ich_spi_slave *ich = to_ich_spi(slave); + uint16_t control; + int16_t opcode_index; + int with_address; + int status; + int bytes = bitlen / 8; + struct spi_trans *trans = &ich->trans; + unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END); + int using_cmd = 0; + /* Align read transactions to 64-byte boundaries */ + char buff[ctlr.databytes]; + + /* Ee don't support writing partial bytes. */ + if (bitlen % 8) { + debug("ICH SPI: Accessing partial bytes not supported\n"); + return -1; + } + + /* An empty end transaction can be ignored */ + if (type == SPI_XFER_END && !dout && !din) + return 0; + + if (type & SPI_XFER_BEGIN) + memset(trans, '\0', sizeof(*trans)); + + /* Dp we need to come back later to finish it? */ + if (dout && type == SPI_XFER_BEGIN) { + if (bytes > ICH_MAX_CMD_LEN) { + debug("ICH SPI: Command length limit exceeded\n"); + return -1; + } + memcpy(trans->cmd, dout, bytes); + trans->cmd_len = bytes; + debug("ICH SPI: Saved %d bytes\n", bytes); + return 0; + } + + /* + * We process a 'middle' spi_xfer() call, which has no + * SPI_XFER_BEGIN/END, as an independent transaction as if it had + * an end. We therefore repeat the command. This is because ICH + * seems to have no support for this, or because interest (in digging + * out the details and creating a special case in the code) is low. + */ + if (trans->cmd_len) { + trans->out = trans->cmd; + trans->bytesout = trans->cmd_len; + using_cmd = 1; + debug("ICH SPI: Using %d bytes\n", trans->cmd_len); + } else { + trans->out = dout; + trans->bytesout = dout ? bytes : 0; + } + + trans->in = din; + trans->bytesin = din ? bytes : 0; + + /* There has to always at least be an opcode. */ + if (!trans->bytesout) { + debug("ICH SPI: No opcode for transfer\n"); + return -1; + } + + if (ich_status_poll(SPIS_SCIP, 0) == -1) + return -1; + + ich_writew(SPIS_CDS | SPIS_FCERR, ctlr.status); + + spi_setup_type(trans, using_cmd ? bytes : 0); + opcode_index = spi_setup_opcode(trans); + if (opcode_index < 0) + return -1; + with_address = spi_setup_offset(trans); + if (with_address < 0) + return -1; + + if (trans->opcode == SPI_OPCODE_WREN) { + /* + * Treat Write Enable as Atomic Pre-Op if possible + * in order to prevent the Management Engine from + * issuing a transaction between WREN and DATA. + */ + if (!ctlr.ichspi_lock) + ich_writew(trans->opcode, ctlr.preop); + return 0; + } + + if (ctlr.speed && ctlr.max_speed >= 33000000) { + int byte; + + byte = ich_readb(ctlr.speed); + if (ich->speed >= 33000000) + byte |= SSFC_SCF_33MHZ; + else + byte &= ~SSFC_SCF_33MHZ; + ich_writeb(byte, ctlr.speed); + } + + /* See if we have used up the command data */ + if (using_cmd && dout && bytes) { + trans->out = dout; + trans->bytesout = bytes; + debug("ICH SPI: Moving to data, %d bytes\n", bytes); + } + + /* Preset control fields */ + control = ich_readw(ctlr.control); + control &= ~SSFC_RESERVED; + control = SPIC_SCGO | ((opcode_index & 0x07) << 4); + + /* Issue atomic preop cycle if needed */ + if (ich_readw(ctlr.preop)) + control |= SPIC_ACS; + + if (!trans->bytesout && !trans->bytesin) { + /* SPI addresses are 24 bit only */ + if (with_address) + ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr); + + /* + * This is a 'no data' command (like Write Enable), its + * bitesout size was 1, decremented to zero while executing + * spi_setup_opcode() above. Tell the chip to send the + * command. + */ + ich_writew(control, ctlr.control); + + /* wait for the result */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + debug("ICH SPI: Command transaction error\n"); + return -1; + } + + return 0; + } + + /* + * Check if this is a write command atempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (trans->bytesout > ctlr.databytes) { + debug("ICH SPI: Too much to write. This should be prevented by the driver's max_write_size?\n"); + return -1; + } + + /* + * Read or write up to databytes bytes at a time until everything has + * been sent. + */ + while (trans->bytesout || trans->bytesin) { + uint32_t data_length; + uint32_t aligned_offset; + uint32_t diff; + + aligned_offset = trans->offset & ~(ctlr.databytes - 1); + diff = trans->offset - aligned_offset; + + /* SPI addresses are 24 bit only */ + ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr); + + if (trans->bytesout) + data_length = min(trans->bytesout, ctlr.databytes); + else + data_length = min(trans->bytesin, ctlr.databytes); + + /* Program data into FDATA0 to N */ + if (trans->bytesout) { + write_reg(trans->out, ctlr.data, data_length); + spi_use_out(trans, data_length); + if (with_address) + trans->offset += data_length; + } + + /* Add proper control fields' values */ + control &= ~((ctlr.databytes - 1) << 8); + control |= SPIC_DS; + control |= (data_length - 1) << 8; + + /* write it */ + ich_writew(control, ctlr.control); + + /* Wait for Cycle Done Status or Flash Cycle Error. */ + status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); + if (status == -1) + return -1; + + if (status & SPIS_FCERR) { + debug("ICH SPI: Data transaction error\n"); + return -1; + } + + if (trans->bytesin) { + if (diff) { + data_length -= diff; + read_reg(ctlr.data, buff, ctlr.databytes); + memcpy(trans->in, buff + diff, data_length); + } else { + read_reg(ctlr.data, trans->in, data_length); + } + spi_use_in(trans, data_length); + if (with_address) + trans->offset += data_length; + } + } + + /* Clear atomic preop now that xfer is done */ + ich_writew(0, ctlr.preop); + + return 0; +} + + +/* + * This uses the SPI controller from the Intel Cougar Point and Panther Point + * PCH to write-protect portions of the SPI flash until reboot. The changes + * don't actually take effect until the HSFS[FLOCKDN] bit is set, but that's + * done elsewhere. + */ +int spi_write_protect_region(uint32_t lower_limit, uint32_t length, int hint) +{ + uint32_t tmplong; + uint32_t upper_limit; + + if (!ctlr.pr) { + printf("%s: operation not supported on this chipset\n", + __func__); + return -1; + } + + if (length == 0 || + lower_limit > (0xFFFFFFFFUL - length) + 1 || + hint < 0 || hint > 4) { + printf("%s(0x%x, 0x%x, %d): invalid args\n", __func__, + lower_limit, length, hint); + return -1; + } + + upper_limit = lower_limit + length - 1; + + /* + * Determine bits to write, as follows: + * 31 Write-protection enable (includes erase operation) + * 30:29 reserved + * 28:16 Upper Limit (FLA address bits 24:12, with 11:0 == 0xfff) + * 15 Read-protection enable + * 14:13 reserved + * 12:0 Lower Limit (FLA address bits 24:12, with 11:0 == 0x000) + */ + tmplong = 0x80000000 | + ((upper_limit & 0x01fff000) << 4) | + ((lower_limit & 0x01fff000) >> 12); + + printf("%s: writing 0x%08x to %p\n", __func__, tmplong, + &ctlr.pr[hint]); + ctlr.pr[hint] = tmplong; + + return 0; +} diff --git a/drivers/spi/ich.h b/drivers/spi/ich.h new file mode 100644 index 0000000..bd7bc12 --- /dev/null +++ b/drivers/spi/ich.h @@ -0,0 +1,143 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but without any warranty; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file is derived from the flashrom project. + */ + +struct ich7_spi_regs { + uint16_t spis; + uint16_t spic; + uint32_t spia; + uint64_t spid[8]; + uint64_t _pad; + uint32_t bbar; + uint16_t preop; + uint16_t optype; + uint8_t opmenu[8]; +} __packed; + +struct ich9_spi_regs { + uint32_t bfpr; /* 0x00 */ + uint16_t hsfs; + uint16_t hsfc; + uint32_t faddr; + uint32_t _reserved0; + uint32_t fdata[16]; /* 0x10 */ + uint32_t frap; /* 0x50 */ + uint32_t freg[5]; + uint32_t _reserved1[3]; + uint32_t pr[5]; /* 0x74 */ + uint32_t _reserved2[2]; + uint8_t ssfs; /* 0x90 */ + uint8_t ssfc[3]; + uint16_t preop; /* 0x94 */ + uint16_t optype; + uint8_t opmenu[8]; /* 0x98 */ + uint32_t bbar; + uint8_t _reserved3[12]; + uint32_t fdoc; + uint32_t fdod; + uint8_t _reserved4[8]; + uint32_t afc; + uint32_t lvscc; + uint32_t uvscc; + uint8_t _reserved5[4]; + uint32_t fpb; + uint8_t _reserved6[28]; + uint32_t srdl; + uint32_t srdc; + uint32_t srd; +} __packed; + +enum { + SPIS_SCIP = 0x0001, + SPIS_GRANT = 0x0002, + SPIS_CDS = 0x0004, + SPIS_FCERR = 0x0008, + SSFS_AEL = 0x0010, + SPIS_LOCK = 0x8000, + SPIS_RESERVED_MASK = 0x7ff0, + SSFS_RESERVED_MASK = 0x7fe2 +}; + +enum { + SPIC_SCGO = 0x000002, + SPIC_ACS = 0x000004, + SPIC_SPOP = 0x000008, + SPIC_DBC = 0x003f00, + SPIC_DS = 0x004000, + SPIC_SME = 0x008000, + SSFC_SCF_MASK = 0x070000, + SSFC_RESERVED = 0xf80000, + + /* Mask for speed byte, biuts 23:16 of SSFC */ + SSFC_SCF_33MHZ = 0x01, +}; + +enum { + HSFS_FDONE = 0x0001, + HSFS_FCERR = 0x0002, + HSFS_AEL = 0x0004, + HSFS_BERASE_MASK = 0x0018, + HSFS_BERASE_SHIFT = 3, + HSFS_SCIP = 0x0020, + HSFS_FDOPSS = 0x2000, + HSFS_FDV = 0x4000, + HSFS_FLOCKDN = 0x8000 +}; + +enum { + HSFC_FGO = 0x0001, + HSFC_FCYCLE_MASK = 0x0006, + HSFC_FCYCLE_SHIFT = 1, + HSFC_FDBC_MASK = 0x3f00, + HSFC_FDBC_SHIFT = 8, + HSFC_FSMIE = 0x8000 +}; + +enum { + SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0, + SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1, + SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2, + SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3 +}; + +enum { + ICH_MAX_CMD_LEN = 5, +}; + +struct spi_trans { + uint8_t cmd[ICH_MAX_CMD_LEN]; + int cmd_len; + const uint8_t *out; + uint32_t bytesout; + uint8_t *in; + uint32_t bytesin; + uint8_t type; + uint8_t opcode; + uint32_t offset; +}; + +struct ich_spi_slave { + struct spi_slave slave; + struct spi_trans trans; /* current transaction in progress */ + int speed; /* SPI speed in Hz */ +}; -- cgit v1.1