From 5c7f10fda362db16a7bf3e571b4ae1e88fac2466 Mon Sep 17 00:00:00 2001 From: Oliver Schinagl Date: Fri, 26 Jul 2013 12:56:58 +0200 Subject: sun6i: Add basic axp221 driver The A31 uses the AXP221 pmic for various voltages. Signed-off-by: Oliver Schinagl Signed-off-by: Hans de Goede Acked-by: Ian Campbell -- Changes in v2: -Rebase Changes in v3: -Add support for all dldo and aldo-s -Add Kconfig option to select building AXP221 and to select voltage of dldo and aldo-s Changes in v4: -Add axp221_setbits helper function -Use symbolic names for enabled bits in CTRL1 - CTRL3 registers --- drivers/power/Kconfig | 47 +++++++++++++ drivers/power/Makefile | 1 + drivers/power/axp221.c | 186 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 234 insertions(+) create mode 100644 drivers/power/axp221.c (limited to 'drivers') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index e69de29..1ec7c0e 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -0,0 +1,47 @@ +config AXP221_POWER + boolean "axp221 pmic support" + depends on MACH_SUN6I + default y + ---help--- + Say y here to enable support for the axp221 pmic found on most sun6i + (A31) boards. + +config AXP221_DLDO1_VOLT + int "axp221 dldo1 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to + disable dldo1. + +config AXP221_DLDO4_VOLT + int "axp221 dldo4 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to + disable dldo4. + +config AXP221_ALDO1_VOLT + int "axp221 aldo1 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to + disable aldo1. + +config AXP221_ALDO2_VOLT + int "axp221 aldo2 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to + disable aldo2. + +config AXP221_ALDO3_VOLT + int "axp221 aldo3 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to + disable aldo3. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index dc64e4d..04bd996 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o +obj-$(CONFIG_AXP221_POWER) += axp221.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c new file mode 100644 index 0000000..941193a --- /dev/null +++ b/drivers/power/axp221.c @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2013 Oliver Schinagl + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +static int axp221_setbits(u8 reg, u8 bits) +{ + int ret; + u8 val; + + ret = p2wi_read(reg, &val); + if (ret) + return ret; + + val |= bits; + return p2wi_write(reg, val); +} + +int axp221_set_dcdc1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100); + + ret = p2wi_write(AXP221_DCDC1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DCDC1_EN); +} + +int axp221_set_dcdc2(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); + + return p2wi_write(AXP221_DCDC2_CTRL, cfg); +} + +int axp221_set_dcdc3(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20); + + return p2wi_write(AXP221_DCDC3_CTRL, cfg); +} + +int axp221_set_dcdc4(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); + + return p2wi_write(AXP221_DCDC4_CTRL, cfg); +} + +int axp221_set_dcdc5(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50); + + return p2wi_write(AXP221_DCDC5_CTRL, cfg); +} + +int axp221_set_dldo1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO1_EN); +} + +int axp221_set_dldo2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO2_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO2_EN); +} + +int axp221_set_dldo3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO3_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO3_EN); +} + +int axp221_set_dldo4(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO4_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO4_EN); +} + +int axp221_set_aldo1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL1, + AXP221_OUTPUT_CTRL1_ALDO1_EN); +} + +int axp221_set_aldo2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO2_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL1, + AXP221_OUTPUT_CTRL1_ALDO2_EN); +} + +int axp221_set_aldo3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO3_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL3, + AXP221_OUTPUT_CTRL3_ALDO3_EN); +} + +int axp221_init(void) +{ + u8 axp_chip_id; + int ret; + + p2wi_init(); + ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, + AXP221_INIT_DATA); + if (ret) + return ret; + + ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id); + if (ret) + return ret; + + if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17)) + return -ENODEV; + + return 0; +} -- cgit v1.1 From 115200ceb0faad679bcc7d7dba4b63ff065606c5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Nov 2014 16:09:00 +0100 Subject: sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-s Add proper Kconfig options to select the usb Vbus gpio-s, besides moving to Kconfig being the right thing to do, an added advantage of this is that it allows for boards without Vbus gpio-s. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- drivers/usb/host/ehci-sunxi.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 4befd57..193ac43 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -39,7 +39,6 @@ static struct sunxi_ehci_hcd { { .usb_rst_mask = CCM_USB_CTRL_PHY1_RST, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO, .csr = (void *)SUNXI_USB_CSR, .irq = 39, .id = 1, @@ -48,7 +47,6 @@ static struct sunxi_ehci_hcd { { .usb_rst_mask = CCM_USB_CTRL_PHY2_RST, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO, .csr = (void *)SUNXI_USB_CSR, .irq = 40, .id = 2, @@ -68,6 +66,15 @@ static void *get_io_base(int hcd_id) return NULL; } +static int get_vbus_gpio(int hcd_id) +{ + switch (hcd_id) { + case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN); + } + return -1; +} + static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr, int data, int len) { @@ -143,14 +150,16 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci) sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN); - gpio_direction_output(sunxi_ehci->gpio_vbus, 1); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 1); } static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - gpio_direction_output(sunxi_ehci->gpio_vbus, 0); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 0); sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN); @@ -165,13 +174,17 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; int err; + sunxi_ehci->gpio_vbus = get_vbus_gpio(sunxi_ehci->id); + /* enable common PHY only once */ if (index == 0) setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); - err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); - if (err) - return err; + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); + if (err) + return err; + } sunxi_ehci_enable(sunxi_ehci); @@ -197,9 +210,11 @@ int ehci_hcd_stop(int index) sunxi_ehci_disable(sunxi_ehci); - err = gpio_free(sunxi_ehci->gpio_vbus); - if (err) - return err; + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_free(sunxi_ehci->gpio_vbus); + if (err) + return err; + } /* disable common PHY only once, for the last enabled hcd */ if (enabled_hcd_count == 1) -- cgit v1.1 From 76946dfe69359496aa0fd144d102068334974916 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Nov 2014 14:51:12 +0100 Subject: sun6i: ehci: Add sun6i ehci support Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede Acked-by: Ian Campbell Acked-by: Marek Vasut --- drivers/usb/host/ehci-sunxi.c | 45 ++++++++++++++++++++++++++++--------------- 1 file changed, 29 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 193ac43..cc9a8fa 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -10,16 +10,14 @@ */ #include +#include #include #include #include #include "ehci.h" -#define SUNXI_USB1_IO_BASE 0x01c14000 -#define SUNXI_USB2_IO_BASE 0x01c1c000 - #define SUNXI_USB_PMU_IRQ_ENABLE 0x800 -#define SUNXI_USB_CSR 0x01c13404 +#define SUNXI_USB_CSR 0x404 #define SUNXI_USB_PASSBY_EN 1 #define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10) @@ -32,23 +30,28 @@ static struct sunxi_ehci_hcd { int usb_rst_mask; int ahb_clk_mask; int gpio_vbus; - void *csr; int irq; int id; } sunxi_echi_hcd[] = { { - .usb_rst_mask = CCM_USB_CTRL_PHY1_RST, + .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .csr = (void *)SUNXI_USB_CSR, +#ifndef CONFIG_MACH_SUN6I .irq = 39, +#else + .irq = 72, +#endif .id = 1, }, #if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) { - .usb_rst_mask = CCM_USB_CTRL_PHY2_RST, + .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1, - .csr = (void *)SUNXI_USB_CSR, +#ifndef CONFIG_MACH_SUN6I .irq = 40, +#else + .irq = 74, +#endif .id = 2, } #endif @@ -58,12 +61,16 @@ static int enabled_hcd_count; static void *get_io_base(int hcd_id) { - if (hcd_id == 1) - return (void *)SUNXI_USB1_IO_BASE; - else if (hcd_id == 2) - return (void *)SUNXI_USB2_IO_BASE; - else + switch (hcd_id) { + case 0: + return (void *)SUNXI_USB0_BASE; + case 1: + return (void *)SUNXI_USB1_BASE; + case 2: + return (void *)SUNXI_USB2_BASE; + default: return NULL; + } } static int get_vbus_gpio(int hcd_id) @@ -79,7 +86,7 @@ static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr, int data, int len) { int j = 0, usbc_bit = 0; - void *dest = sunxi_ehci->csr; + void *dest = get_io_base(0) + SUNXI_USB_CSR; usbc_bit = 1 << (sunxi_ehci->id * 2); for (j = 0; j < len; j++) { @@ -112,7 +119,7 @@ static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci) usb_phy_write(sunxi_ehci, 0x20, 0x14, 5); /* threshold adjustment disconnect */ -#ifdef CONFIG_MACH_SUN4I +#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I usb_phy_write(sunxi_ehci, 0x2a, 3, 2); #else usb_phy_write(sunxi_ehci, 0x2a, 2, 2); @@ -145,6 +152,9 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci) setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask); setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask); +#ifdef CONFIG_MACH_SUN6I + setbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask); +#endif sunxi_usb_phy_init(sunxi_ehci); @@ -163,6 +173,9 @@ static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci) sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN); +#ifdef CONFIG_MACH_SUN6I + clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask); +#endif clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask); clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask); } -- cgit v1.1