From f861f51c4673d35908e4e330a86c81d7d909b51c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 3 Oct 2015 14:21:00 -0300 Subject: ls102xa: Fix reset hang Since commit 623d96e89aca6("imx: wdog: correct wcr register settings") issuing a 'reset' command causes the system to hang. Unlike i.MX and Vybrid, the watchdog controller on LS102x is big-endian. This means that the watchdog on LS1021 has been working by accident as it does not use the big-endian accessors in drivers/watchdog/imx_watchdog.c. Commit 623d96e89aca6("imx: wdog: correct wcr register settings") only revelead the endianness problem on LS102x. In order to fix the reset hang, introduce a reset_cpu() implementation that is specific for ls102x, which accesses the watchdog WCR register in big-endian format. All that is required to reset LS102x is to clear the SRS bit. This approach is a temporary workaround to avoid a regression for LS102x in the 2015.10 release. The proper fix is to make the watchdog driver endian-aware, so that it can work for i.MX, Vybrid and LS102x. Reported-by: Sinan Akman Tested-by: Sinan Akman Reviewed-by: Wolfgang Denk Signed-off-by: Fabio Estevam --- drivers/watchdog/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/watchdog') diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 9e9cb55..a007ae8 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o -ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610 ls102xa)) +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610)) obj-y += imx_watchdog.o endif obj-$(CONFIG_S5P) += s5p_wdt.o -- cgit v1.1