From 2d34151f7501ddaa599897f0d89ad576126b03eb Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 30 Apr 2014 15:09:56 -0600 Subject: usb: tegra: refactor PHY type selection Both init_{utmi,ulpi}_usb_controller() have nearly identical code for PHY type selection. Pull this out into a common function to remove the duplication. Cc: Jim Lin Cc: Stefan Agner Signed-off-by: Stephen Warren --- drivers/usb/host/ehci-tegra.c | 58 +++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 30 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 9a9a127..55a546e 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -293,6 +293,32 @@ static const unsigned *get_pll_timing(void) return timing; } +/* select the PHY to use with a USB controller */ +static void init_phy_mux(struct fdt_usb *config, uint pts) +{ + struct usb_ctlr *usbctlr = config->reg; + +#if defined(CONFIG_TEGRA20) + if (config->periph_id == PERIPH_ID_USBD) { + clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK, + PTS_UTMI << PTS1_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS1); + } else { + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, + PTS_UTMI << PTS_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS); + } +#else + /* Set to Host mode after Controller Reset was done */ + clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC, + USBMODE_CM_HC); + /* Select PHY interface after setting host mode */ + clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK, + pts << PTS_SHIFT); + clrbits_le32(&usbctlr->hostpc1_devlc, STS); +#endif +} + /* set up the UTMI USB controller with the parameters provided */ static int init_utmi_usb_controller(struct fdt_usb *config) { @@ -485,25 +511,7 @@ static int init_utmi_usb_controller(struct fdt_usb *config) clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); /* Select UTMI parallel interface */ -#if defined(CONFIG_TEGRA20) - if (config->periph_id == PERIPH_ID_USBD) { - clrsetbits_le32(&usbctlr->port_sc1, PTS1_MASK, - PTS_UTMI << PTS1_SHIFT); - clrbits_le32(&usbctlr->port_sc1, STS1); - } else { - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, - PTS_UTMI << PTS_SHIFT); - clrbits_le32(&usbctlr->port_sc1, STS); - } -#else - /* Set to Host mode after Controller Reset was done */ - clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC, - USBMODE_CM_HC); - /* Select PHY interface after setting host mode */ - clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK, - PTS_UTMI << PTS_SHIFT); - clrbits_le32(&usbctlr->hostpc1_devlc, STS); -#endif + init_phy_mux(config, PTS_UTMI); /* Deassert power down state */ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | @@ -561,17 +569,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config) ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); /* Select ULPI parallel interface */ -#if defined(CONFIG_TEGRA20) - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, - PTS_ULPI << PTS_SHIFT); -#else - /* Set to Host mode after Controller Reset was done */ - clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC, - USBMODE_CM_HC); - /* Select PHY interface after setting host mode */ - clrsetbits_le32(&usbctlr->hostpc1_devlc, PTS_MASK, - PTS_ULPI << PTS_SHIFT); -#endif + init_phy_mux(config, PTS_ULPI); /* enable ULPI transceiver */ setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); -- cgit v1.1