From dddb7c9ffdb3813c1242aa43b935dd3484c53a35 Mon Sep 17 00:00:00 2001 From: Matthias Weisser Date: Wed, 6 Jul 2011 00:28:30 +0000 Subject: imx: Add support for USB EHCI on imx25 Adding support for USB host on imx25 using the internal PHY. Changing the name of base address define for imx31 to get some unification. Signed-off-by: Matthias Weisser --- drivers/usb/host/ehci-mxc.c | 33 +++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 6af35ab..a0cfbb7 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -29,6 +29,14 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 +#ifdef CONFIG_MX25 +#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6) +#define MX25_USB_CTRL_HSTD_BIT (1<<5) +#define MX25_USB_CTRL_USBTE_BIT (1<<4) +#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3) +#endif + +#ifdef CONFIG_MX31 #define MX31_OTG_SIC_SHIFT 29 #define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) @@ -42,12 +50,19 @@ #define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) +#endif static int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; + +#ifdef CONFIG_MX25 + v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT | + MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT; +#endif + #ifdef CONFIG_MX31 - v = readl(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET); + v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); switch (port) { case 0: /* OTG port */ @@ -85,36 +100,38 @@ static int mxc_set_usbcontrol(int port, unsigned int flags) default: return -EINVAL; } - - writel(v, MX31_OTG_BASE_ADDR + - USBCTRL_OTGBASE_OFFSET); #endif - return 0; + + writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); + return 0; } int ehci_hcd_init(void) { - u32 tmp; struct usb_ehci *ehci; +#ifdef CONFIG_MX31 + u32 tmp; struct clock_control_regs *sc_regs = (struct clock_control_regs *)CCM_BASE; tmp = __raw_readl(&sc_regs->ccmr); __raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ; +#endif udelay(80); /* Take USB2 */ - ehci = (struct usb_ehci *)(MX31_OTG_BASE_ADDR + + ehci = (struct usb_ehci *)(IMX_USB_BASE + (0x200 * CONFIG_MXC_USB_PORT)); hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); setbits_le32(&ehci->usbmode, CM_HOST); +#ifdef CONFIG_MX31 setbits_le32(&ehci->control, USB_EN); __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); - +#endif mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); udelay(10000); -- cgit v1.1