From 70cc443d5833b27dd4dd4a48a771778c39734f75 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Thu, 10 Dec 2015 16:32:25 +0100 Subject: usb: host: ehci: samsung: Move hcor initialization after usb phy setup With the old order of initialization the hcor pointer has been setup to the same address as Exynos EHCI base address (0x12110000 instead of 0x12110010). Such behaviour was caused by reading value of 0 instead of 0x10 from EHCI HCCPBASE register without doing proper clock initialization before. To fix this problem hcor initialization has been moved after USB PHY setup. Now ehci_readl(&ctx->hcd->cr_capbase) returns correct value. Signed-off-by: Lukasz Majewski --- drivers/usb/host/ehci-exynos.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 18e9251..bede04b 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -219,14 +219,14 @@ static int ehci_usb_probe(struct udevice *dev) ctx->hcd = (struct ehci_hccr *)plat->hcd_base; ctx->usb = (struct exynos_usb_phy *)plat->phy_base; - hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd + - HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase))); /* setup the Vbus gpio here */ if (dm_gpio_is_valid(&plat->vbus_gpio)) dm_gpio_set_value(&plat->vbus_gpio, 1); setup_usb_phy(ctx->usb); + hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd + + HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase))); return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST); } -- cgit v1.1