From 3874b6d674d194c8d34b4f7242337c9f2120ca9a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 11 Jul 2011 02:37:01 +0200 Subject: USB: EHCI: Allow EHCI post-powerup configuration in board files This patch allows USB to work on some hosts, which need additional frobing after the host was powered up via regular USB powerup sequence. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Remy Bohmer Cc: Wolfgang Grandegger Cc: Jason Liu --- drivers/usb/host/ehci-hcd.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1cee158..3f7bc2c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -205,6 +205,14 @@ static inline void ehci_invalidate_dcache(struct QH *qh) } #endif /* CONFIG_EHCI_DCACHE */ +void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) +{ + mdelay(50); +} + +void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) + __attribute__((weak, alias("__ehci_powerup_fixup"))); + static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) { uint32_t result; @@ -713,8 +721,8 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, * usb 2.0 specification say 50 ms resets on * root */ - wait_ms(50); - /* terminate the reset */ + ehci_powerup_fixup(status_reg, ®); + ehci_writel(status_reg, reg & ~EHCI_PS_PR); /* * A host controller must terminate the reset -- cgit v1.1