From 115200ceb0faad679bcc7d7dba4b63ff065606c5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Nov 2014 16:09:00 +0100 Subject: sunxi: ehci: Add proper Kconfig options to select the usb Vbus gpio-s Add proper Kconfig options to select the usb Vbus gpio-s, besides moving to Kconfig being the right thing to do, an added advantage of this is that it allows for boards without Vbus gpio-s. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- drivers/usb/host/ehci-sunxi.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 4befd57..193ac43 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -39,7 +39,6 @@ static struct sunxi_ehci_hcd { { .usb_rst_mask = CCM_USB_CTRL_PHY1_RST, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO, .csr = (void *)SUNXI_USB_CSR, .irq = 39, .id = 1, @@ -48,7 +47,6 @@ static struct sunxi_ehci_hcd { { .usb_rst_mask = CCM_USB_CTRL_PHY2_RST, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO, .csr = (void *)SUNXI_USB_CSR, .irq = 40, .id = 2, @@ -68,6 +66,15 @@ static void *get_io_base(int hcd_id) return NULL; } +static int get_vbus_gpio(int hcd_id) +{ + switch (hcd_id) { + case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN); + } + return -1; +} + static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr, int data, int len) { @@ -143,14 +150,16 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci) sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN); - gpio_direction_output(sunxi_ehci->gpio_vbus, 1); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 1); } static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - gpio_direction_output(sunxi_ehci->gpio_vbus, 0); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 0); sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN); @@ -165,13 +174,17 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; int err; + sunxi_ehci->gpio_vbus = get_vbus_gpio(sunxi_ehci->id); + /* enable common PHY only once */ if (index == 0) setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); - err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); - if (err) - return err; + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); + if (err) + return err; + } sunxi_ehci_enable(sunxi_ehci); @@ -197,9 +210,11 @@ int ehci_hcd_stop(int index) sunxi_ehci_disable(sunxi_ehci); - err = gpio_free(sunxi_ehci->gpio_vbus); - if (err) - return err; + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_free(sunxi_ehci->gpio_vbus); + if (err) + return err; + } /* disable common PHY only once, for the last enabled hcd */ if (enabled_hcd_count == 1) -- cgit v1.1