From c1d4ad94170a488bc2837a8b9abc3976a71b04f4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 5 Mar 2012 19:27:13 +0000 Subject: sh_spi: Add 4 chip select signals supporting The module has 4 chip select signals. This patch supports it. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Nobuhiro Iwamatsu --- drivers/spi/sh_spi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers/spi/sh_spi.c') diff --git a/drivers/spi/sh_spi.c b/drivers/spi/sh_spi.c index 78c7f1a..e944b23 100644 --- a/drivers/spi/sh_spi.c +++ b/drivers/spi/sh_spi.c @@ -1,7 +1,7 @@ /* * SH SPI driver * - * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2011-2012 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -82,6 +82,19 @@ void spi_init(void) { } +static void sh_spi_set_cs(struct sh_spi *ss, unsigned int cs) +{ + unsigned long val = 0; + + if (cs & 0x01) + val |= SH_SPI_SSS0; + if (cs & 0x02) + val |= SH_SPI_SSS1; + + sh_spi_clear_bit(SH_SPI_SSS0 | SH_SPI_SSS1, &ss->regs->cr4); + sh_spi_set_bit(val, &ss->regs->cr4); +} + struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { @@ -104,6 +117,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, sh_spi_write(0x00, &ss->regs->cr1); /* CR3 init */ sh_spi_write(0x00, &ss->regs->cr3); + sh_spi_set_cs(ss, cs); clear_fifo(ss); @@ -242,8 +256,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - /* This driver supports "bus = 0" and "cs = 0" only. */ - if (!bus && !cs) + if (!bus && cs < SH_SPI_NUM_CS) return 1; else return 0; -- cgit v1.1