From 42d1f0394bef0624fc9664714d54bb137931d6a6 Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 15 Oct 2003 23:53:47 +0000 Subject: * Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup --- drivers/sk98lin/h/skgepnmi.h | 106 +++++++++++++++++++++---------------------- 1 file changed, 53 insertions(+), 53 deletions(-) (limited to 'drivers/sk98lin/h/skgepnmi.h') diff --git a/drivers/sk98lin/h/skgepnmi.h b/drivers/sk98lin/h/skgepnmi.h index c1f847e..7532313 100644 --- a/drivers/sk98lin/h/skgepnmi.h +++ b/drivers/sk98lin/h/skgepnmi.h @@ -28,44 +28,44 @@ * $Log: skgepnmi.h,v $ * Revision 1.59 2002/12/16 14:03:50 tschilli * New defines for VCT added. - * + * * Revision 1.58 2002/12/16 09:04:59 tschilli * Code for VCT handling added. - * + * * Revision 1.57 2002/09/26 12:41:05 tschilli * SK_PNMI_PORT BufPort entry in struct SK_PNMI added. - * + * * Revision 1.56 2002/08/16 11:10:41 rwahl * - Replaced c++ comment. - * + * * Revision 1.55 2002/08/09 15:40:21 rwahl * Editorial change (renamed ConfSpeedCap). - * + * * Revision 1.54 2002/08/09 11:06:07 rwahl * Added OID_SKGE_SPEED_CAP. - * + * * Revision 1.53 2002/08/09 09:45:28 rwahl * Added support for NDIS OID_PNP_xxx. * Editorial changes. - * + * * Revision 1.52 2002/08/06 17:54:07 rwahl * - Added speed cap to PNMI config struct. - * + * * Revision 1.51 2002/07/17 19:19:26 rwahl * - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS. * - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES(). * - Added speed mode & status to PNMI config struct. * - Editorial changes. - * + * * Revision 1.50 2002/05/22 08:59:37 rwahl * Added string definitions for error msgs. - * + * * Revision 1.49 2001/11/20 09:23:50 rwahl * - pnmi struct: reordered and aligned to 32bit. - * + * * Revision 1.48 2001/02/23 14:34:24 mkunz * Changed macro PHYS2INST. Added pAC to Interface - * + * * Revision 1.47 2001/02/07 08:28:23 mkunz * - Added Oids: OID_SKGE_DIAG_ACTION * OID_SKGE_DIAG_RESULT @@ -73,161 +73,161 @@ * OID_SKGE_CURRENT_PACKET_FILTER * OID_SKGE_INTERMEDIATE_SUPPORT * - Changed value of OID_SKGE_MTU - * + * * Revision 1.46 2001/02/06 10:01:41 mkunz * - Pnmi V4 dual net support added. Interface functions and macros extended * - Vpd bug fixed * - OID_SKGE_MTU added - * + * * Revision 1.45 2001/01/22 13:41:37 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.44 2000/09/07 07:35:27 rwahl * - removed NDIS counter specific data type. * - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED. - * + * * Revision 1.43 2000/08/04 11:41:08 rwahl * - Fixed compiler warning (port is always >= 0) for macros * SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS - * + * * Revision 1.42 2000/08/03 15:14:07 rwahl * - Corrected error in driver macros addressing a physical port. - * + * * Revision 1.41 2000/08/01 16:22:29 rwahl * - Changed MDB version to 3.1. * - Added definitions for StatRxLongFrames counter. * - Added macro to be used by driver to count long frames received. * - Added directive to control width (default = 32bit) of NDIS statistic * counters (SK_NDIS_64BIT_CTR). - * + * * Revision 1.40 2000/03/31 13:51:34 rwahl * Added SK_UPTR cast to offset calculation for PNMI struct fields; * missing cast caused compiler warnings by Win64 compiler. * * Revision 1.39 1999/12/06 10:09:47 rwahl * Added new error log message. - * + * * Revision 1.38 1999/11/22 13:57:55 cgoos * Changed license header to GPL. * * Revision 1.37 1999/09/14 14:25:32 rwahl * Set MDB version for 1000Base-T (sensors, Master/Slave) changes. - * + * * Revision 1.36 1999/05/20 09:24:56 cgoos * Changes for 1000Base-T (sensors, Master/Slave). - * + * * Revision 1.35 1999/04/13 15:10:51 mhaveman * Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to * grant unified interface. But PNMI macros will store the same * value as RLMT macros. - * + * * Revision 1.34 1999/04/13 15:03:49 mhaveman * -Changed copyright * -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be * used. - * + * * Revision 1.33 1999/03/23 10:41:02 mhaveman * Changed comments. - * + * * Revision 1.32 1999/01/25 15:01:33 mhaveman * Added support for multiple simultaniously active ports. - * + * * Revision 1.31 1999/01/19 10:06:26 mhaveman * Added new error log message. - * + * * Revision 1.30 1999/01/05 10:34:49 mhaveman * Fixed little error in RlmtChangeEstimate calculation. - * + * * Revision 1.29 1999/01/05 09:59:41 mhaveman * Redesigned port switch average calculation to avoid 64bit * arithmetic. - * + * * Revision 1.28 1998/12/08 10:05:48 mhaveman * Defined macro SK_PNMI_MIN_STRUCT_SIZE. - * + * * Revision 1.27 1998/12/03 14:39:35 mhaveman * Fixed problem that LSTAT was enumerated wrong. - * + * * Revision 1.26 1998/12/03 11:19:51 mhaveman * Changed contents of errlog message SK_PNMI_ERR016MSG - * + * * Revision 1.25 1998/12/01 10:40:04 mhaveman * Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in * SK_PNMI_STRUCT_DATA to be conform with OID definition. - * + * * Revision 1.24 1998/11/20 08:09:27 mhaveman * Added macros to convert between logical, physical port indexes and * instances. - * + * * Revision 1.23 1998/11/10 13:41:13 mhaveman * Needed to change interface, because NT driver needs a return value * of needed buffer space on TOO_SHORT errors. Therefore all * SkPnmiGet/Preset/Set functions now have a pointer to the length * parameter, where the needed space on error is returned. - * + * * Revision 1.22 1998/11/03 12:05:51 mhaveman * Added pAC parameter to counter macors. * * Revision 1.21 1998/11/02 10:47:36 mhaveman * Added syslog messages for internal errors. - * + * * Revision 1.20 1998/10/30 15:49:36 mhaveman * -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt. * -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds. - * + * * Revision 1.19 1998/10/29 15:38:44 mhaveman * Changed string lengths of PNMI_STRUCT_DATA structure because * string OIDs are now encoded with leading length ocetet. - * + * * Revision 1.18 1998/10/29 08:52:27 mhaveman * -Added byte to strings in PNMI_STRUCT_DATA structure. * -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements. - * + * * Revision 1.17 1998/10/28 08:49:50 mhaveman * -Changed type of Instance back to SK_U32 because of VPD * -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD, * and Connector. - * + * * Revision 1.16 1998/10/22 10:42:31 mhaveman * -Removed (SK_U32) casts for OIDs * -excluded NDIS OIDs when they are already defined with ifndef _NDIS_ - * + * * Revision 1.15 1998/10/20 13:56:28 mhaveman * Headerfile includes now directly other header files to comile correctly. - * + * * Revision 1.14 1998/10/20 07:31:09 mhaveman * Made type changes to unsigned int where possible. - * + * * Revision 1.13 1998/10/19 10:53:13 mhaveman * -Casted OID definitions to SK_U32 * -Renamed RlmtMAC... to RlmtPort... * -Changed wrong type of VpdEntriesList from SK_U32 to char * - * + * * Revision 1.12 1998/10/13 07:42:27 mhaveman * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA * -Removed old cvs history entries * -Renamed MacNumber to PortNumber - * + * * Revision 1.11 1998/10/07 10:55:24 mhaveman * -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs * necessary. * -Added OID_GEN_ Ids to support the windows driver. - * + * * Revision 1.10 1998/09/30 13:41:10 mhaveman * Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'. - * + * * Revision 1.9 1998/09/04 17:06:17 mhaveman * -Added SyncCounter as macro. * -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS. * -Added macros for driver description and version strings. - * + * * Revision 1.8 1998/09/04 14:36:52 mhaveman * Added OIDs and Structure to access value of macro counters which are * counted by the driver. - * + * * Revision 1.7 1998/09/04 11:59:36 mhaveman * Everything compiles now. Driver Macros for counting still missing. - * + * ****************************************************************************/ #ifndef _SKGEPNMI_H_ @@ -355,7 +355,7 @@ /* #define OID_802_3_MULTICAST_LIST 0x01010103 */ /* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ /* #define OID_802_3_MAC_OPTIONS 0x01010105 */ - + #define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 #define OID_802_3_XMIT_ONE_COLLISION 0x01020102 #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 @@ -389,7 +389,7 @@ #define OID_SKGE_VPD_VALUE 0xFF010106 #define OID_SKGE_VPD_ACCESS 0xFF010107 #define OID_SKGE_VPD_ACTION 0xFF010108 - + #define OID_SKGE_PORT_NUMBER 0xFF010110 #define OID_SKGE_DEVICE_TYPE 0xFF010111 #define OID_SKGE_DRIVER_DESCR 0xFF010112 @@ -436,7 +436,7 @@ #define OID_SKGE_SPEED_MODE 0xFF010171 #define OID_SKGE_SPEED_STATUS 0xFF010172 -#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 #define OID_SKGE_SENSOR_INDEX 0xFF020101 #define OID_SKGE_SENSOR_DESCR 0xFF020102 #define OID_SKGE_SENSOR_TYPE 0xFF020103 -- cgit v1.1