From 7a9348728ebda63cdbaacffd83099aa71d9d4c54 Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Tue, 23 Oct 2007 10:22:16 +0100 Subject: Move PL01* serial drivers to drivers/serial and adjust Makefiles. --- drivers/serial_pl011.c | 161 ------------------------------------------------- 1 file changed, 161 deletions(-) delete mode 100644 drivers/serial_pl011.c (limited to 'drivers/serial_pl011.c') diff --git a/drivers/serial_pl011.c b/drivers/serial_pl011.c deleted file mode 100644 index 4d35fe5..0000000 --- a/drivers/serial_pl011.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * (C) Copyright 2004 - * ARM Ltd. - * Philippe Robin, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Simple U-Boot driver for the PrimeCell PL011 UARTs on the IntegratorCP */ -/* Should be fairly simple to make it work with the PL010 as well */ - -#include - -#ifdef CFG_PL011_SERIAL - -#include "serial_pl011.h" - -#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val)) -#define IO_READ(addr) (*(volatile unsigned int *)(addr)) - -/* - * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1 - * Versatile PB has four UARTs. - */ - -#define CONSOLE_PORT CONFIG_CONS_INDEX -#define baudRate CONFIG_BAUDRATE -static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; -#define NUM_PORTS (sizeof(port)/sizeof(port[0])) - -static void pl011_putc (int portnum, char c); -static int pl011_getc (int portnum); -static int pl011_tstc (int portnum); - - -int serial_init (void) -{ - unsigned int temp; - unsigned int divider; - unsigned int remainder; - unsigned int fraction; - - /* - ** First, disable everything. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0); - - /* - ** Set baud rate - ** - ** IBRD = UART_CLK / (16 * BAUD_RATE) - ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) - */ - temp = 16 * baudRate; - divider = CONFIG_PL011_CLOCK / temp; - remainder = CONFIG_PL011_CLOCK % temp; - temp = (8 * remainder) / baudRate; - fraction = (temp >> 1) + (temp & 1); - - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); - - /* - ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH, - (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); - - /* - ** Finally, enable the UART - */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, - (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | - UART_PL011_CR_RXE)); - - return 0; -} - -void serial_putc (const char c) -{ - if (c == '\n') - pl011_putc (CONSOLE_PORT, '\r'); - - pl011_putc (CONSOLE_PORT, c); -} - -void serial_puts (const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -int serial_getc (void) -{ - return pl011_getc (CONSOLE_PORT); -} - -int serial_tstc (void) -{ - return pl011_tstc (CONSOLE_PORT); -} - -void serial_setbrg (void) -{ -} - -static void pl011_putc (int portnum, char c) -{ - /* Wait until there is space in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF); - - /* Send the character */ - IO_WRITE (port[portnum] + UART_PL01x_DR, c); -} - -static int pl011_getc (int portnum) -{ - unsigned int data; - - /* Wait until there is data in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE); - - data = IO_READ (port[portnum] + UART_PL01x_DR); - - /* Check for an error flag */ - if (data & 0xFFFFFF00) { - /* Clear the error */ - IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); - return -1; - } - - return (int) data; -} - -static int pl011_tstc (int portnum) -{ - return !(IO_READ (port[portnum] + UART_PL01x_FR) & - UART_PL01x_FR_RXFE); -} - -#endif -- cgit v1.1