From 51d8102f8ed7a52348c13ccc10bdc6821f0f7632 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Mon, 8 Oct 2012 14:46:23 -0700 Subject: serial: zynq: Move serial registration from serial_initialize() Move the registration of zynq_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented zynq_serial_initialize() function, which is implemented inside of the serial_zynq driver allows encapsulation of zynq_serialN_device within the serial_zynq driver itself. Also, remove the exports of zynq_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_zynq driver and the default console is picked by CONFIG_SERIAL macro in config file. Signed-off-by: Tom Rini --- drivers/serial/serial_zynq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/serial/serial_zynq.c') diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 35bbebe..5ac2561 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -245,3 +245,13 @@ __weak struct serial_device *default_serial_console(void) return NULL; } #endif + +void zynq_serial_initalize(void) +{ +#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0 + serial_register(&uart_zynq_serial0_device); +#endif +#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1 + serial_register(&uart_zynq_serial1_device); +#endif +} -- cgit v1.1