From f7c7ab636ab2c81d9fb1def7256c94b998c7298f Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Sun, 22 Mar 2015 18:07:09 +0100 Subject: power: axp221: Virtual VBUS detect and enable GPIOs to replace separate logic This converts the VBUS detection and enable logic to GPIO instead of separate axp functions and checks that have to be used aside usual GPIO functions. Signed-off-by: Paul Kocialkowski Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/power/axp221.c | 75 +++++++++++++++++++++++++++++--------------------- 1 file changed, 44 insertions(+), 31 deletions(-) (limited to 'drivers/power/axp221.c') diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index c2c3988..f758a75 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -14,6 +14,7 @@ #include #include #include +#include #include /* @@ -385,54 +386,66 @@ int axp221_get_sid(unsigned int *sid) return 0; } -int axp_get_vbus(void) +int axp_gpio_direction_input(unsigned int pin) { - int ret; - u8 val; - - ret = axp221_init(); - if (ret) - return ret; - - ret = pmic_bus_read(AXP221_POWER_STATUS, &val); - if (ret) - return ret; - - return (val & AXP221_POWER_STATUS_VBUS_USABLE) ? 1 : 0; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_DETECT: + return 0; + default: + return -EINVAL; + } } -static int axp_drivebus_setup(void) +int axp_gpio_direction_output(unsigned int pin, unsigned int val) { int ret; - ret = axp221_init(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_ENABLE: + ret = axp221_clrbits(AXP221_MISC_CTRL, + AXP221_MISC_CTRL_N_VBUSEN_FUNC); + if (ret) + return ret; - /* Set N_VBUSEN pin to output / DRIVEBUS function */ - return axp221_clrbits(AXP221_MISC_CTRL, AXP221_MISC_CTRL_N_VBUSEN_FUNC); + return axp_gpio_set_value(pin, val); + default: + return -EINVAL; + } } -int axp_drivebus_enable(void) +int axp_gpio_get_value(unsigned int pin) { int ret; + u8 val; - ret = axp_drivebus_setup(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_DETECT: + ret = pmic_bus_read(AXP221_POWER_STATUS, &val); + if (ret) + return ret; - /* Set DRIVEBUS high */ - return axp221_setbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS); + return !!(val & AXP221_POWER_STATUS_VBUS_USABLE); + default: + return -EINVAL; + } } -int axp_drivebus_disable(void) +int axp_gpio_set_value(unsigned int pin, unsigned int val) { int ret; - ret = axp_drivebus_setup(); - if (ret) - return ret; + switch (pin) { + case SUNXI_GPIO_AXP0_VBUS_ENABLE: + if (val) + ret = axp221_setbits(AXP221_VBUS_IPSOUT, + AXP221_VBUS_IPSOUT_DRIVEBUS); + else + ret = axp221_clrbits(AXP221_VBUS_IPSOUT, + AXP221_VBUS_IPSOUT_DRIVEBUS); - /* Set DRIVEBUS low */ - return axp221_clrbits(AXP221_VBUS_IPSOUT, AXP221_VBUS_IPSOUT_DRIVEBUS); + if (ret) + return ret; + } + + return 0; } -- cgit v1.1