From 38491d9c6515eafd97d881cab0420652f07d92a5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 30 Mar 2016 00:26:48 +0800 Subject: power: axp818: Add support for FLDOs The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/power/Kconfig | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers/power/Kconfig') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 548fe26..937b9aa 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -238,6 +238,33 @@ config AXP_ELDO3_VOLT 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). +config AXP_FLDO1_VOLT + int "axp pmic fldo1 voltage" + depends on AXP818_POWER + default 0 if MACH_SUN8I_A83T + ---help--- + Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to + disable fldo1. + On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is + used. + +config AXP_FLDO2_VOLT + int "axp pmic eldo2 voltage" + depends on AXP818_POWER + default 900 if MACH_SUN8I_A83T + ---help--- + Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to + disable fldo2. + On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V. + +config AXP_FLDO3_VOLT + int "axp pmic fldo3 voltage" + depends on AXP818_POWER + default 0 + ---help--- + Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to + disable fldo3. + config SY8106A_VOUT1_VOLT int "SY8106A pmic VOUT1 voltage" depends on SY8106A_POWER -- cgit v1.1