From 2439e4bfa111babf4bc07ba20efbf3e36036813e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 21 Nov 2007 21:19:24 +0100 Subject: drivers/net : move net drivers to drivers/net Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/pcnet.c | 526 -------------------------------------------------------- 1 file changed, 526 deletions(-) delete mode 100644 drivers/pcnet.c (limited to 'drivers/pcnet.c') diff --git a/drivers/pcnet.c b/drivers/pcnet.c deleted file mode 100644 index 2af0e8f..0000000 --- a/drivers/pcnet.c +++ /dev/null @@ -1,526 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger, wg@denx.de. - * - * This driver for AMD PCnet network controllers is derived from the - * Linux driver pcnet32.c written 1996-1999 by Thomas Bogendoerfer. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#if 0 -#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */ -#endif - -#if PCNET_DEBUG_LEVEL > 0 -#define PCNET_DEBUG1(fmt,args...) printf (fmt ,##args) -#if PCNET_DEBUG_LEVEL > 1 -#define PCNET_DEBUG2(fmt,args...) printf (fmt ,##args) -#else -#define PCNET_DEBUG2(fmt,args...) -#endif -#else -#define PCNET_DEBUG1(fmt,args...) -#define PCNET_DEBUG2(fmt,args...) -#endif - -#if defined(CONFIG_CMD_NET) \ - && defined(CONFIG_NET_MULTI) && defined(CONFIG_PCNET) - -#if !defined(CONF_PCNET_79C973) && defined(CONF_PCNET_79C975) -#error "Macro for PCnet chip version is not defined!" -#endif - -/* - * Set the number of Tx and Rx buffers, using Log_2(# buffers). - * Reasonable default values are 4 Tx buffers, and 16 Rx buffers. - * That translates to 2 (4 == 2^^2) and 4 (16 == 2^^4). - */ -#define PCNET_LOG_TX_BUFFERS 0 -#define PCNET_LOG_RX_BUFFERS 2 - -#define TX_RING_SIZE (1 << (PCNET_LOG_TX_BUFFERS)) -#define TX_RING_LEN_BITS ((PCNET_LOG_TX_BUFFERS) << 12) - -#define RX_RING_SIZE (1 << (PCNET_LOG_RX_BUFFERS)) -#define RX_RING_LEN_BITS ((PCNET_LOG_RX_BUFFERS) << 4) - -#define PKT_BUF_SZ 1544 - -/* The PCNET Rx and Tx ring descriptors. */ -struct pcnet_rx_head { - u32 base; - s16 buf_length; - s16 status; - u32 msg_length; - u32 reserved; -}; - -struct pcnet_tx_head { - u32 base; - s16 length; - s16 status; - u32 misc; - u32 reserved; -}; - -/* The PCNET 32-Bit initialization block, described in databook. */ -struct pcnet_init_block { - u16 mode; - u16 tlen_rlen; - u8 phys_addr[6]; - u16 reserved; - u32 filter[2]; - /* Receive and transmit ring base, along with extra bits. */ - u32 rx_ring; - u32 tx_ring; - u32 reserved2; -}; - -typedef struct pcnet_priv { - struct pcnet_rx_head rx_ring[RX_RING_SIZE]; - struct pcnet_tx_head tx_ring[TX_RING_SIZE]; - struct pcnet_init_block init_block; - /* Receive Buffer space */ - unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4]; - int cur_rx; - int cur_tx; -} pcnet_priv_t; - -static pcnet_priv_t *lp; - -/* Offsets from base I/O address for WIO mode */ -#define PCNET_RDP 0x10 -#define PCNET_RAP 0x12 -#define PCNET_RESET 0x14 -#define PCNET_BDP 0x16 - -static u16 pcnet_read_csr (struct eth_device *dev, int index) -{ - outw (index, dev->iobase+PCNET_RAP); - return inw (dev->iobase+PCNET_RDP); -} - -static void pcnet_write_csr (struct eth_device *dev, int index, u16 val) -{ - outw (index, dev->iobase+PCNET_RAP); - outw (val, dev->iobase+PCNET_RDP); -} - -static u16 pcnet_read_bcr (struct eth_device *dev, int index) -{ - outw (index, dev->iobase+PCNET_RAP); - return inw (dev->iobase+PCNET_BDP); -} - -static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val) -{ - outw (index, dev->iobase+PCNET_RAP); - outw (val, dev->iobase+PCNET_BDP); -} - -static void pcnet_reset (struct eth_device *dev) -{ - inw (dev->iobase+PCNET_RESET); -} - -static int pcnet_check (struct eth_device *dev) -{ - outw (88, dev->iobase+PCNET_RAP); - return (inw (dev->iobase+PCNET_RAP) == 88); -} - -static int pcnet_init( struct eth_device* dev, bd_t *bis); -static int pcnet_send (struct eth_device* dev, volatile void *packet, - int length); -static int pcnet_recv (struct eth_device* dev); -static void pcnet_halt (struct eth_device* dev); -static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_num); - -#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a)) -#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a))) - -static struct pci_device_id supported[] = { - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE }, - { } -}; - - -int pcnet_initialize(bd_t *bis) -{ - pci_dev_t devbusfn; - struct eth_device* dev; - u16 command, status; - int dev_nr = 0; - - PCNET_DEBUG1("\npcnet_initialize...\n"); - - for (dev_nr = 0; ; dev_nr++) { - - /* - * Find the PCnet PCI device(s). - */ - if ((devbusfn = pci_find_devices(supported, dev_nr)) < 0) { - break; - } - - /* - * Allocate and pre-fill the device structure. - */ - dev = (struct eth_device*) malloc(sizeof *dev); - dev->priv = (void *)devbusfn; - sprintf(dev->name, "pcnet#%d", dev_nr); - - /* - * Setup the PCI device. - */ - pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (unsigned int *)&dev->iobase); - dev->iobase &= ~0xf; - - PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ", - dev->name, devbusfn, dev->iobase); - - command = PCI_COMMAND_IO | PCI_COMMAND_MASTER; - pci_write_config_word(devbusfn, PCI_COMMAND, command); - pci_read_config_word(devbusfn, PCI_COMMAND, &status); - if ((status & command) != command) { - printf("%s: Couldn't enable IO access or Bus Mastering\n", - dev->name); - free(dev); - continue; - } - - pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40); - - /* - * Probe the PCnet chip. - */ - if (pcnet_probe(dev, bis, dev_nr) < 0) { - free(dev); - continue; - } - - /* - * Setup device structure and register the driver. - */ - dev->init = pcnet_init; - dev->halt = pcnet_halt; - dev->send = pcnet_send; - dev->recv = pcnet_recv; - - eth_register(dev); - } - - udelay(10 * 1000); - - return dev_nr; -} - -static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr) -{ - int chip_version; - char *chipname; -#ifdef PCNET_HAS_PROM - int i; -#endif - - /* Reset the PCnet controller */ - pcnet_reset(dev); - - /* Check if register access is working */ - if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) { - printf("%s: CSR register access check failed\n", dev->name); - return -1; - } - - /* Identify the chip */ - chip_version = pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev,89) << 16); - if ((chip_version & 0xfff) != 0x003) - return -1; - chip_version = (chip_version >> 12) & 0xffff; - switch (chip_version) { -#ifdef CONFIG_PCNET_79C973 - case 0x2625: - chipname = "PCnet/FAST III 79C973"; /* PCI */ - break; -#endif -#ifdef CONFIG_PCNET_79C975 - case 0x2627: - chipname = "PCnet/FAST III 79C975"; /* PCI */ - break; -#endif - default: - printf("%s: PCnet version %#x not supported\n", - dev->name, chip_version); - return -1; - } - - PCNET_DEBUG1("AMD %s\n", chipname); - -#ifdef PCNET_HAS_PROM - /* - * In most chips, after a chip reset, the ethernet address is read from - * the station address PROM at the base address and programmed into the - * "Physical Address Registers" CSR12-14. - */ - for (i = 0; i < 3; i++) { - unsigned int val; - val = pcnet_read_csr(dev, i+12) & 0x0ffff; - /* There may be endianness issues here. */ - dev->enetaddr[2*i ] = val & 0x0ff; - dev->enetaddr[2*i+1] = (val >> 8) & 0x0ff; - } -#endif /* PCNET_HAS_PROM */ - - return 0; -} - -static int pcnet_init(struct eth_device* dev, bd_t *bis) -{ - int i, val; - u32 addr; - - PCNET_DEBUG1("%s: pcnet_init...\n", dev->name); - - /* Switch pcnet to 32bit mode */ - pcnet_write_bcr (dev, 20, 2); - -#ifdef CONFIG_PN62 - /* Setup LED registers */ - val = pcnet_read_bcr (dev, 2) | 0x1000; - pcnet_write_bcr (dev, 2, val); /* enable LEDPE */ - pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */ - pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */ - pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */ - pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */ -#endif - - /* Set/reset autoselect bit */ - val = pcnet_read_bcr (dev, 2) & ~2; - val |= 2; - pcnet_write_bcr (dev, 2, val); - - /* Enable auto negotiate, setup, disable fd */ - val = pcnet_read_bcr(dev, 32) & ~0x98; - val |= 0x20; - pcnet_write_bcr(dev, 32, val); - - /* - * We only maintain one structure because the drivers will never - * be used concurrently. In 32bit mode the RX and TX ring entries - * must be aligned on 16-byte boundaries. - */ - if (lp == NULL) { - addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10); - addr = (addr + 0xf) & ~0xf; - lp = (pcnet_priv_t *)addr; - } - - lp->init_block.mode = cpu_to_le16(0x0000); - lp->init_block.filter[0] = 0x00000000; - lp->init_block.filter[1] = 0x00000000; - - /* - * Initialize the Rx ring. - */ - lp->cur_rx = 0; - for (i = 0; i < RX_RING_SIZE; i++) { - lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]); - lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ); - lp->rx_ring[i].status = cpu_to_le16(0x8000); - PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", - i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length, - lp->rx_ring[i].status); - } - - /* - * Initialize the Tx ring. The Tx buffer address is filled in as - * needed, but we do need to clear the upper ownership bit. - */ - lp->cur_tx = 0; - for (i = 0; i < TX_RING_SIZE; i++) { - lp->tx_ring[i].base = 0; - lp->tx_ring[i].status = 0; - } - - /* - * Setup Init Block. - */ - PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block); - - for (i = 0; i < 6; i++) { - lp->init_block.phys_addr[i] = dev->enetaddr[i]; - PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]); - } - - lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS | - RX_RING_LEN_BITS); - lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring); - lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring); - - PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", - lp->init_block.tlen_rlen, - lp->init_block.rx_ring, lp->init_block.tx_ring); - - /* - * Tell the controller where the Init Block is located. - */ - addr = PCI_TO_MEM(dev, &lp->init_block); - pcnet_write_csr(dev, 1, addr & 0xffff); - pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff); - - pcnet_write_csr (dev, 4, 0x0915); - pcnet_write_csr (dev, 0, 0x0001); /* start */ - - /* Wait for Init Done bit */ - for (i = 10000; i > 0; i--) { - if (pcnet_read_csr (dev, 0) & 0x0100) - break; - udelay(10); - } - if (i <= 0) { - printf("%s: TIMEOUT: controller init failed\n", dev->name); - pcnet_reset (dev); - return 0; - } - - /* - * Finally start network controller operation. - */ - pcnet_write_csr (dev, 0, 0x0002); - - return 1; -} - -static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len) -{ - int i, status; - struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx]; - - PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet); - - /* Wait for completion by testing the OWN bit */ - for (i = 1000; i > 0; i--) { - status = le16_to_cpu(entry->status); - if ((status & 0x8000) == 0) - break; - udelay(100); - PCNET_DEBUG2("."); - } - if (i <= 0) { - printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", - dev->name, lp->cur_tx, status); - pkt_len = 0; - goto failure; - } - - /* - * Setup Tx ring. Caution: the write order is important here, - * set the status with the "ownership" bits last. - */ - status = 0x8300; - entry->length = le16_to_cpu(-pkt_len); - entry->misc = 0x00000000; - entry->base = PCI_TO_MEM_LE(dev, packet); - entry->status = le16_to_cpu(status); - - /* Trigger an immediate send poll. */ - pcnet_write_csr (dev, 0, 0x0008); - - failure: - if (++lp->cur_tx >= TX_RING_SIZE) - lp->cur_tx = 0; - - PCNET_DEBUG2("done\n"); - return pkt_len; -} - -static int pcnet_recv(struct eth_device* dev) -{ - struct pcnet_rx_head *entry; - int pkt_len = 0; - u16 status; - - while (1) { - entry = &lp->rx_ring[lp->cur_rx]; - /* - * If we own the next entry, it's a new packet. Send it up. - */ - if (((status = le16_to_cpu(entry->status)) & 0x8000) != 0) { - break; - } - status >>= 8; - - if (status != 0x03) { /* There was an error. */ - - printf("%s: Rx%d", dev->name, lp->cur_rx); - PCNET_DEBUG1(" (status=0x%x)", status); - if (status & 0x20) printf(" Frame"); - if (status & 0x10) printf(" Overflow"); - if (status & 0x08) printf(" CRC"); - if (status & 0x04) printf(" Fifo"); - printf(" Error\n"); - entry->status &= le16_to_cpu(0x03ff); - - } else { - - pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4; - if (pkt_len < 60) { - printf("%s: Rx%d: invalid packet length %d\n", - dev->name, lp->cur_rx, pkt_len); - } else { - NetReceive(lp->rx_buf[lp->cur_rx], pkt_len); - PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n", - lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]); - } - } - entry->status |= cpu_to_le16(0x8000); - - if (++lp->cur_rx >= RX_RING_SIZE) - lp->cur_rx = 0; - } - return pkt_len; -} - -static void pcnet_halt(struct eth_device* dev) -{ - int i; - - PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name); - - /* Reset the PCnet controller */ - pcnet_reset (dev); - - /* Wait for Stop bit */ - for (i = 1000; i > 0; i--) { - if (pcnet_read_csr (dev, 0) & 0x4) - break; - udelay(10); - } - if (i <= 0) { - printf("%s: TIMEOUT: controller reset failed\n", dev->name); - } -} - -#endif -- cgit v1.1