From 73646217186aa17afc8e305c5f06f06dd335eaad Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 20 Nov 2007 20:33:09 +0100 Subject: drivers/pcmcia : move pcmcia drivers to drivers/pcmcia Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/pcmcia/ti_pci1410a.c | 665 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 665 insertions(+) create mode 100644 drivers/pcmcia/ti_pci1410a.c (limited to 'drivers/pcmcia/ti_pci1410a.c') diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c new file mode 100644 index 0000000..208ca50 --- /dev/null +++ b/drivers/pcmcia/ti_pci1410a.c @@ -0,0 +1,665 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * + * Lots of code copied from: + * + * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. + * (C) 1999-2000 Magnus Damm + * + * "The ExCA standard specifies that socket controllers should provide + * two IO and five memory windows per socket, which can be independently + * configured and positioned in the host address space and mapped to + * arbitrary segments of card address space. " - David A Hinds. 1999 + * + * This controller does _not_ meet the ExCA standard. + * + * m8xx pcmcia controller brief info: + * + 8 windows (attrib, mem, i/o) + * + up to two slots (SLOT_A and SLOT_B) + * + inputpins, outputpins, event and mask registers. + * - no offset register. sigh. + * + * Because of the lacking offset register we must map the whole card. + * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. + * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO + * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. + * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. + * They are maximum 64KByte each... + */ + + +#undef DEBUG /**/ + +/* + * PCMCIA support + */ +#include +#include +#include +#include +#include + +#include + +#if defined(CONFIG_CMD_PCMCIA) && defined(CONFIG_IDE_TI_CARDBUS) + +int pcmcia_on(int ide_base_bus); + +static int pcmcia_off(void); +static int hardware_disable(int slot); +static int hardware_enable(int slot); +static int voltage_set(int slot, int vcc, int vpp); +static void print_funcid(int func); +static void print_fixed(volatile uchar *p); +static int identify(volatile uchar *p); +static int check_ide_device(int slot, int ide_base_bus); + + +/* ------------------------------------------------------------------------- */ + + +const char *indent = "\t "; + +/* ------------------------------------------------------------------------- */ + + +int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ +#ifndef CFG_FIRST_PCMCIA_BUS +# define CFG_FIRST_PCMCIA_BUS 0 +#endif + + int rcode = 0; + + if (argc != 2) { + printf ("Usage: pinit {on | off}\n"); + return 1; + } + if (strcmp(argv[1],"on") == 0) { + rcode = pcmcia_on(CFG_FIRST_PCMCIA_BUS); + } else if (strcmp(argv[1],"off") == 0) { + rcode = pcmcia_off(); + } else { + printf ("Usage: pinit {on | off}\n"); + return 1; + } + + return rcode; +} + +/* ------------------------------------------------------------------------- */ + + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */ + { PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */ + { } +}; + +static pci_dev_t devbusfn; +static u32 socket_base; +static u32 pcmcia_cis_ptr; + +int pcmcia_on(int ide_base_bus) +{ + u16 dev_id; + u32 socket_status; + int slot = 0; + int cis_len; + u16 io_base; + u16 io_len; + + /* + * Find the CardBus PCI device(s). + */ + if ((devbusfn = pci_find_devices(supported, 0)) < 0) { + printf("Ti CardBus: not found\n"); + return 1; + } + + pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id); + + if (dev_id == 0xac56) { + debug("Enable PCMCIA Ti PCI1510\n"); + } else { + debug("Enable PCMCIA Ti PCI1410A\n"); + } + + pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN; + cis_len = CFG_PCMCIA_CIS_WIN_SIZE; + + io_base = CFG_PCMCIA_IO_WIN; + io_len = CFG_PCMCIA_IO_WIN_SIZE; + + /* + * Setup the PCI device. + */ + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base); + socket_base &= ~0xf; + + socket_status = readl(socket_base+8); + if ((socket_status & 6) == 0) { + printf("Card Present: "); + + switch (socket_status & 0x3c00) { + + case 0x400: + printf("5V "); + break; + case 0x800: + printf("3.3V "); + break; + case 0xc00: + printf("3.3/5V "); + break; + default: + printf("unsupported Vcc "); + break; + } + switch (socket_status & 0x30) { + case 0x10: + printf("16bit PC-Card\n"); + break; + case 0x20: + printf("32bit CardBus Card\n"); + break; + default: + printf("8bit PC-Card\n"); + break; + } + } + + + writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */ + writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */ + + /* Careful: the linux yenta driver do not seem to reset the offset + * in the i/o windows, so leaving them non-zero is a problem */ + + writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */ + writeb(io_base>>8, socket_base + 0x809); + writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */ + writeb((io_base + io_len - 1)>>8, socket_base + 0x80b); + writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address 0x000 */ + writeb(0x00, socket_base + 0x837); + + + writeb((pcmcia_cis_ptr&0x000ff000) >> 12, + socket_base + 0x810); /* Memory window 0 start address bits 19-12 */ + writeb((pcmcia_cis_ptr&0x00f00000) >> 20, + socket_base + 0x811); /* Memory window 0 start address bits 23-20 */ + writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12, + socket_base + 0x812); /* Memory window 0 end address bits 19-12*/ + writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20, + socket_base + 0x813); /* Memory window 0 end address bits 23-20*/ + writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */ + writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and + * options (read/write, attribute access) */ + writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control */ + writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */ + + writeb((pcmcia_cis_ptr & 0xff000000) >> 24, + socket_base + 0x840); /* Memory window address bits 31-24 */ + + + /* turn off voltage */ + if (voltage_set(slot, 0, 0)) { + return 1; + } + + /* Enable external hardware */ + if (hardware_enable(slot)) { + return 1; + } + + if (check_ide_device(slot, ide_base_bus)) { + return 1; + } + + return 0; +} + +/* ------------------------------------------------------------------------- */ + + +static int pcmcia_off (void) +{ + int slot = 0; + + writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */ + + writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */ + writeb(0x00, socket_base + 0x809); + writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */ + writeb(0x00, socket_base + 0x80b); + writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address */ + writeb(0x00, socket_base + 0x837); + + writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address */ + writeb(0x00, socket_base + 0x80d); + writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address */ + writeb(0x00, socket_base + 0x80f); + writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address */ + writeb(0x00, socket_base + 0x839); + + writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */ + writeb(0x00, socket_base + 0x811); + writeb(0x00, socket_base + 0x812); /* Memory window 0 end address */ + writeb(0x00, socket_base + 0x813); + writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */ + writeb(0x00, socket_base + 0x815); + + writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */ + + + /* turn off voltage */ + voltage_set(slot, 0, 0); + + /* disable external hardware */ + printf ("Shutdown and Poweroff Ti PCI1410A\n"); + hardware_disable(slot); + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + + +#define MAX_TUPEL_SZ 512 +#define MAX_FEATURES 4 +int ide_devices_found; +static int check_ide_device(int slot, int ide_base_bus) +{ + volatile uchar *ident = NULL; + volatile uchar *feature_p[MAX_FEATURES]; + volatile uchar *p, *start; + int n_features = 0; + uchar func_id = ~0; + uchar code, len; + ushort config_base = 0; + int found = 0; + int i; + u32 socket_status; + + debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr); + + socket_status = readl(socket_base+8); + + if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) { + printf("no card or CardBus card\n"); + return 1; + } + + start = p = (volatile uchar *) pcmcia_cis_ptr; + + while ((p - start) < MAX_TUPEL_SZ) { + + code = *p; p += 2; + + if (code == 0xFF) { /* End of chain */ + break; + } + + len = *p; p += 2; +#if defined(DEBUG) && (DEBUG > 1) + { + volatile uchar *q = p; + printf ("\nTuple code %02x length %d\n\tData:", + code, len); + + for (i = 0; i < len; ++i) { + printf (" %02x", *q); + q+= 2; + } + } +#endif /* DEBUG */ + switch (code) { + case CISTPL_VERS_1: + ident = p + 4; + break; + case CISTPL_FUNCID: + /* Fix for broken SanDisk which may have 0x80 bit set */ + func_id = *p & 0x7F; + break; + case CISTPL_FUNCE: + if (n_features < MAX_FEATURES) + feature_p[n_features++] = p; + break; + case CISTPL_CONFIG: + config_base = (*(p+6) << 8) + (*(p+4)); + debug ("\n## Config_base = %04x ###\n", config_base); + default: + break; + } + p += 2 * len; + } + + found = identify(ident); + + if (func_id != ((uchar)~0)) { + print_funcid (func_id); + + if (func_id == CISTPL_FUNCID_FIXED) + found = 1; + else + return 1; /* no disk drive */ + } + + for (i=0; i id_str) { + if (*t == ' ') { + *t = '\0'; + } else { + break; + } + } + puts(id_str); + putc('\n'); + + for (card=known_cards; *card; ++card) { + debug ("## Compare against \"%s\"\n", *card); + if (strcmp(*card, id_str) == 0) { /* found! */ + debug ("## CARD FOUND ##\n"); + return 1; + } + } + + return 0; /* don't know */ +} + +#endif /* CONFIG_IDE_TI_CARDBUS */ -- cgit v1.1