From d60626f8c11e3d76cb53c3ba16249c7b054c5a1e Mon Sep 17 00:00:00 2001 From: Kyle Moffett Date: Tue, 18 Oct 2011 11:05:26 +0000 Subject: e1000: Restructure and streamline PCI device probing By allocating the e1000 device structures much earlier, we can easily generate better error messages and siginficantly clean things up. The only user-visable change (aside from reworded error messages) is that a detected e1000 device which fails to initialize due to software or hardware error will still be allocated a device number. As one example, consider a system with 2 e1000 PCI devices where the first controller has a corrupted EEPROM. Using the old code the second controller would be "e1000#0", while with this change it would be "e1000#1". This change should hopefully make such EEPROM errors much more straightforward to handle correctly in boot scripts and the like. It is also necessary for a followup patch which allows SPI programming of an e1000 controller's EEPROM even if the checksum is invalid. Signed-off-by: Kyle Moffett Cc: Ben Warren --- drivers/net/e1000.c | 126 ++++++++++++++++++++++++++-------------------------- drivers/net/e1000.h | 19 +++++--- 2 files changed, 74 insertions(+), 71 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 7c0f2bf..c7c745a 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -66,7 +66,7 @@ static struct e1000_rx_desc *rx_base; static int tx_tail; static int rx_tail, rx_last; -static struct pci_device_id supported[] = { +static struct pci_device_id e1000_supported[] = { {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82542}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82543GC_FIBER}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82543GC_COPPER}, @@ -4761,7 +4761,7 @@ e1000_set_media_type(struct e1000_hw *hw) **/ static int -e1000_sw_init(struct eth_device *nic, int cardnum) +e1000_sw_init(struct eth_device *nic) { struct e1000_hw *hw = (typeof(hw)) nic->priv; int result; @@ -4779,7 +4779,7 @@ e1000_sw_init(struct eth_device *nic, int cardnum) /* identify the MAC */ result = e1000_set_mac_type(hw); if (result) { - E1000_ERR("Unknown MAC Type\n"); + E1000_ERR(hw->nic, "Unknown MAC Type\n"); return result; } @@ -5111,9 +5111,9 @@ e1000_init(struct eth_device *nic, bd_t * bis) if (ret_val < 0) { if ((ret_val == -E1000_ERR_NOLINK) || (ret_val == -E1000_ERR_TIMEOUT)) { - E1000_ERR("Valid Link not detected\n"); + E1000_ERR(hw->nic, "Valid Link not detected\n"); } else { - E1000_ERR("Hardware Initialization Failed\n"); + E1000_ERR(hw->nic, "Hardware Initialization Failed\n"); } return 0; } @@ -5162,57 +5162,59 @@ You should omit the last argument struct pci_device * for a non-PCI NIC int e1000_initialize(bd_t * bis) { + unsigned int i; pci_dev_t devno; - int card_number = 0; - struct eth_device *nic = NULL; - struct e1000_hw *hw = NULL; - u32 iobase; - int idx = 0; - u32 PciCommandWord; DEBUGFUNC(); - while (1) { /* Find PCI device(s) */ - if ((devno = pci_find_devices(supported, idx++)) < 0) { - break; - } - - pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase); - iobase &= ~0xf; /* Mask the bits that say "this is an io addr" */ - DEBUGOUT("e1000#%d: iobase 0x%08x\n", card_number, iobase); - - pci_write_config_dword(devno, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - /* Check if I/O accesses and Bus Mastering are enabled. */ - pci_read_config_dword(devno, PCI_COMMAND, &PciCommandWord); - if (!(PciCommandWord & PCI_COMMAND_MEMORY)) { - printf("Error: Can not enable MEM access.\n"); - continue; - } else if (!(PciCommandWord & PCI_COMMAND_MASTER)) { - printf("Error: Can not enable Bus Mastering.\n"); - continue; - } - - nic = (struct eth_device *) malloc(sizeof (*nic)); - if (!nic) { - printf("Error: e1000 - Can not alloc memory\n"); - return 0; - } + /* Find and probe all the matching PCI devices */ + for (i = 0; (devno = pci_find_devices(e1000_supported, i)) >= 0; i++) { + u32 val; - hw = (struct e1000_hw *) malloc(sizeof (*hw)); - if (!hw) { + /* + * These will never get freed due to errors, this allows us to + * perform SPI EEPROM programming from U-boot, for example. + */ + struct eth_device *nic = malloc(sizeof(*nic)); + struct e1000_hw *hw = malloc(sizeof(*hw)); + if (!nic || !hw) { + printf("e1000#%u: Out of Memory!\n", i); free(nic); - printf("Error: e1000 - Can not alloc memory\n"); - return 0; + free(hw); + continue; } + /* Make sure all of the fields are initially zeroed */ memset(nic, 0, sizeof(*nic)); memset(hw, 0, sizeof(*hw)); + /* Assign the passed-in values */ + hw->cardnum = i; hw->pdev = devno; + hw->nic = nic; nic->priv = hw; - sprintf(nic->name, "e1000#%d", card_number); + /* Generate a card name */ + sprintf(nic->name, "e1000#%u", hw->cardnum); + + /* Print a debug message with the IO base address */ + pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &val); + E1000_DBG(nic, "iobase 0x%08x\n", val & 0xfffffff0); + + /* Try to enable I/O accesses and bus-mastering */ + val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_dword(devno, PCI_COMMAND, val); + + /* Make sure it worked */ + pci_read_config_dword(devno, PCI_COMMAND, &val); + if (!(val & PCI_COMMAND_MEMORY)) { + E1000_ERR(nic, "Can't enable I/O memory\n"); + continue; + } + if (!(val & PCI_COMMAND_MASTER)) { + E1000_ERR(nic, "Can't enable bus-mastering\n"); + continue; + } /* Are these variables needed? */ hw->fc = e1000_fc_default; @@ -5220,50 +5222,46 @@ e1000_initialize(bd_t * bis) hw->autoneg_failed = 0; hw->autoneg = 1; hw->get_link_status = TRUE; - hw->hw_addr = - pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); + hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, + PCI_REGION_MEM); hw->mac_type = e1000_undefined; /* MAC and Phy settings */ - if (e1000_sw_init(nic, card_number) < 0) { - free(hw); - free(nic); - return 0; + if (e1000_sw_init(nic) < 0) { + E1000_ERR(nic, "Software init failed\n"); + continue; } if (e1000_check_phy_reset_block(hw)) - printf("phy reset block error \n"); + E1000_ERR(nic, "PHY Reset is blocked!\n"); + + /* Basic init was OK, reset the hardware */ e1000_reset_hw(hw); + + /* Validate the EEPROM and get chipset information */ #if !(defined(CONFIG_AP1000) || defined(CONFIG_MVBC_1G)) if (e1000_init_eeprom_params(hw)) { - printf("The EEPROM Checksum Is Not Valid\n"); - free(hw); - free(nic); - return 0; + E1000_ERR(nic, "EEPROM is invalid!\n"); + continue; } if (e1000_validate_eeprom_checksum(nic) < 0) { - printf("The EEPROM Checksum Is Not Valid\n"); - free(hw); - free(nic); - return 0; + E1000_ERR(nic, "EEPROM checksum is bad!\n"); + continue; } #endif e1000_read_mac_addr(nic); - - /* get the bus type information */ e1000_get_bus_type(hw); - printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n", + printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n ", nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2], nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]); + /* Set up the function pointers and register the device */ nic->init = e1000_init; nic->recv = e1000_poll; nic->send = e1000_transmit; nic->halt = e1000_disable; - eth_register(nic); - - card_number++; } - return card_number; + + return i; } diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 5a02dc3..b4e9cf2 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -41,16 +41,18 @@ #include #include -#define E1000_ERR(args...) printf("e1000: " args) +#define E1000_ERR(NIC, fmt, args...) \ + printf("e1000: %s: ERROR: " fmt, (NIC)->name ,##args) #ifdef E1000_DEBUG -#define E1000_DBG(args...) printf("e1000: " args) -#define DEBUGOUT(fmt,args...) printf(fmt ,##args) -#define DEBUGFUNC() printf("%s\n", __FUNCTION__); +#define E1000_DBG(NIC, fmt, args...) \ + printf("e1000: %s: DEBUG: " fmt, (NIC)->name ,##args) +#define DEBUGOUT(fmt, args...) printf(fmt ,##args) +#define DEBUGFUNC() printf("%s\n", __func__); #else -#define E1000_DBG(args...) -#define DEBUGFUNC() -#define DEBUGOUT(fmt,args...) +#define E1000_DBG(HW, args...) do { } while (0) +#define DEBUGFUNC() do { } while (0) +#define DEBUGOUT(fmt, args...) do { } while (0) #endif /* Forward declarations of structures used by the shared code */ @@ -1047,6 +1049,9 @@ typedef enum { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { + struct eth_device *nic; + unsigned int cardnum; + pci_dev_t pdev; uint8_t *hw_addr; e1000_mac_type mac_type; -- cgit v1.1