From 9f649aed95b9b0f860236e9ff96ba0ddb091be91 Mon Sep 17 00:00:00 2001 From: Lionel Xu Date: Fri, 31 Jul 2009 15:14:01 +0800 Subject: ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK board Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu --- drivers/net/Makefile | 2 +- drivers/net/enc28j60_eth.c | 1013 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1014 insertions(+), 1 deletion(-) create mode 100644 drivers/net/enc28j60_eth.c (limited to 'drivers/net') diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e24c4ec..6ba00be 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -37,7 +37,7 @@ COBJS-$(CONFIG_DNET) += dnet.o COBJS-$(CONFIG_E1000) += e1000.o COBJS-$(CONFIG_EEPRO100) += eepro100.o COBJS-$(CONFIG_ENC28J60) += enc28j60.o -COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o +COBJS-$(CONFIG_ENC28J60_ETH) += enc28j60_eth.o COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o COBJS-$(CONFIG_FTMAC100) += ftmac100.o COBJS-$(CONFIG_GRETH) += greth.o diff --git a/drivers/net/enc28j60_eth.c b/drivers/net/enc28j60_eth.c new file mode 100644 index 0000000..c1c88d2 --- /dev/null +++ b/drivers/net/enc28j60_eth.c @@ -0,0 +1,1013 @@ +/* + * Copyright (c) 2008 Embedded Alley Solutions, Inc. + * + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * + * Based on drivers/net/enc28j60.c + * + * The original driver is tied to LPC2292 SPI interface. So SPI + * layer had to be changed in order to get the driver working for + * STMP378x. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#ifdef CONFIG_ENC28J60_ETH +#include +#include + +/* + * Control Registers in Bank 0 + */ + +#define CTL_REG_ERDPTL 0x00 +#define CTL_REG_ERDPTH 0x01 +#define CTL_REG_EWRPTL 0x02 +#define CTL_REG_EWRPTH 0x03 +#define CTL_REG_ETXSTL 0x04 +#define CTL_REG_ETXSTH 0x05 +#define CTL_REG_ETXNDL 0x06 +#define CTL_REG_ETXNDH 0x07 +#define CTL_REG_ERXSTL 0x08 +#define CTL_REG_ERXSTH 0x09 +#define CTL_REG_ERXNDL 0x0A +#define CTL_REG_ERXNDH 0x0B +#define CTL_REG_ERXRDPTL 0x0C +#define CTL_REG_ERXRDPTH 0x0D +#define CTL_REG_ERXWRPTL 0x0E +#define CTL_REG_ERXWRPTH 0x0F +#define CTL_REG_EDMASTL 0x10 +#define CTL_REG_EDMASTH 0x11 +#define CTL_REG_EDMANDL 0x12 +#define CTL_REG_EDMANDH 0x13 +#define CTL_REG_EDMADSTL 0x14 +#define CTL_REG_EDMADSTH 0x15 +#define CTL_REG_EDMACSL 0x16 +#define CTL_REG_EDMACSH 0x17 +/* these are common in all banks */ +#define CTL_REG_EIE 0x1B +#define CTL_REG_EIR 0x1C +#define CTL_REG_ESTAT 0x1D +#define CTL_REG_ECON2 0x1E +#define CTL_REG_ECON1 0x1F + +/* + * Control Registers in Bank 1 + */ + +#define CTL_REG_EHT0 0x00 +#define CTL_REG_EHT1 0x01 +#define CTL_REG_EHT2 0x02 +#define CTL_REG_EHT3 0x03 +#define CTL_REG_EHT4 0x04 +#define CTL_REG_EHT5 0x05 +#define CTL_REG_EHT6 0x06 +#define CTL_REG_EHT7 0x07 +#define CTL_REG_EPMM0 0x08 +#define CTL_REG_EPMM1 0x09 +#define CTL_REG_EPMM2 0x0A +#define CTL_REG_EPMM3 0x0B +#define CTL_REG_EPMM4 0x0C +#define CTL_REG_EPMM5 0x0D +#define CTL_REG_EPMM6 0x0E +#define CTL_REG_EPMM7 0x0F +#define CTL_REG_EPMCSL 0x10 +#define CTL_REG_EPMCSH 0x11 +#define CTL_REG_EPMOL 0x14 +#define CTL_REG_EPMOH 0x15 +#define CTL_REG_EWOLIE 0x16 +#define CTL_REG_EWOLIR 0x17 +#define CTL_REG_ERXFCON 0x18 +#define CTL_REG_EPKTCNT 0x19 + +/* + * Control Registers in Bank 2 + */ + +#define CTL_REG_MACON1 0x00 +#define CTL_REG_MACON2 0x01 +#define CTL_REG_MACON3 0x02 +#define CTL_REG_MACON4 0x03 +#define CTL_REG_MABBIPG 0x04 +#define CTL_REG_MAIPGL 0x06 +#define CTL_REG_MAIPGH 0x07 +#define CTL_REG_MACLCON1 0x08 +#define CTL_REG_MACLCON2 0x09 +#define CTL_REG_MAMXFLL 0x0A +#define CTL_REG_MAMXFLH 0x0B +#define CTL_REG_MAPHSUP 0x0D +#define CTL_REG_MICON 0x11 +#define CTL_REG_MICMD 0x12 +#define CTL_REG_MIREGADR 0x14 +#define CTL_REG_MIWRL 0x16 +#define CTL_REG_MIWRH 0x17 +#define CTL_REG_MIRDL 0x18 +#define CTL_REG_MIRDH 0x19 + +/* + * Control Registers in Bank 3 + */ + +#define CTL_REG_MAADR1 0x00 +#define CTL_REG_MAADR0 0x01 +#define CTL_REG_MAADR3 0x02 +#define CTL_REG_MAADR2 0x03 +#define CTL_REG_MAADR5 0x04 +#define CTL_REG_MAADR4 0x05 +#define CTL_REG_EBSTSD 0x06 +#define CTL_REG_EBSTCON 0x07 +#define CTL_REG_EBSTCSL 0x08 +#define CTL_REG_EBSTCSH 0x09 +#define CTL_REG_MISTAT 0x0A +#define CTL_REG_EREVID 0x12 +#define CTL_REG_ECOCON 0x15 +#define CTL_REG_EFLOCON 0x17 +#define CTL_REG_EPAUSL 0x18 +#define CTL_REG_EPAUSH 0x19 + + +/* + * PHY Register + */ + +#define PHY_REG_PHID1 0x02 +#define PHY_REG_PHID2 0x03 +/* taken from the Linux driver */ +#define PHY_REG_PHCON1 0x00 +#define PHY_REG_PHCON2 0x10 +#define PHY_REG_PHLCON 0x14 + +/* + * Receive Filter Register (ERXFCON) bits + */ + +#define ENC_RFR_UCEN 0x80 +#define ENC_RFR_ANDOR 0x40 +#define ENC_RFR_CRCEN 0x20 +#define ENC_RFR_PMEN 0x10 +#define ENC_RFR_MPEN 0x08 +#define ENC_RFR_HTEN 0x04 +#define ENC_RFR_MCEN 0x02 +#define ENC_RFR_BCEN 0x01 + +/* + * ECON1 Register Bits + */ + +#define ENC_ECON1_TXRST 0x80 +#define ENC_ECON1_RXRST 0x40 +#define ENC_ECON1_DMAST 0x20 +#define ENC_ECON1_CSUMEN 0x10 +#define ENC_ECON1_TXRTS 0x08 +#define ENC_ECON1_RXEN 0x04 +#define ENC_ECON1_BSEL1 0x02 +#define ENC_ECON1_BSEL0 0x01 + +/* + * ECON2 Register Bits + */ +#define ENC_ECON2_AUTOINC 0x80 +#define ENC_ECON2_PKTDEC 0x40 +#define ENC_ECON2_PWRSV 0x20 +#define ENC_ECON2_VRPS 0x08 + +/* + * EIR Register Bits + */ +#define ENC_EIR_PKTIF 0x40 +#define ENC_EIR_DMAIF 0x20 +#define ENC_EIR_LINKIF 0x10 +#define ENC_EIR_TXIF 0x08 +#define ENC_EIR_WOLIF 0x04 +#define ENC_EIR_TXERIF 0x02 +#define ENC_EIR_RXERIF 0x01 + +/* + * ESTAT Register Bits + */ + +#define ENC_ESTAT_INT 0x80 +#define ENC_ESTAT_LATECOL 0x10 +#define ENC_ESTAT_RXBUSY 0x04 +#define ENC_ESTAT_TXABRT 0x02 +#define ENC_ESTAT_CLKRDY 0x01 + +/* + * EIE Register Bits + */ + +#define ENC_EIE_INTIE 0x80 +#define ENC_EIE_PKTIE 0x40 +#define ENC_EIE_DMAIE 0x20 +#define ENC_EIE_LINKIE 0x10 +#define ENC_EIE_TXIE 0x08 +#define ENC_EIE_WOLIE 0x04 +#define ENC_EIE_TXERIE 0x02 +#define ENC_EIE_RXERIE 0x01 + +/* + * MACON1 Register Bits + */ +#define ENC_MACON1_LOOPBK 0x10 +#define ENC_MACON1_TXPAUS 0x08 +#define ENC_MACON1_RXPAUS 0x04 +#define ENC_MACON1_PASSALL 0x02 +#define ENC_MACON1_MARXEN 0x01 + + +/* + * MACON2 Register Bits + */ +#define ENC_MACON2_MARST 0x80 +#define ENC_MACON2_RNDRST 0x40 +#define ENC_MACON2_MARXRST 0x08 +#define ENC_MACON2_RFUNRST 0x04 +#define ENC_MACON2_MATXRST 0x02 +#define ENC_MACON2_TFUNRST 0x01 + +/* + * MACON3 Register Bits + */ +#define ENC_MACON3_PADCFG2 0x80 +#define ENC_MACON3_PADCFG1 0x40 +#define ENC_MACON3_PADCFG0 0x20 +#define ENC_MACON3_TXCRCEN 0x10 +#define ENC_MACON3_PHDRLEN 0x08 +#define ENC_MACON3_HFRMEN 0x04 +#define ENC_MACON3_FRMLNEN 0x02 +#define ENC_MACON3_FULDPX 0x01 + +/* + * MICMD Register Bits + */ +#define ENC_MICMD_MIISCAN 0x02 +#define ENC_MICMD_MIIRD 0x01 + +/* + * MISTAT Register Bits + */ +#define ENC_MISTAT_NVALID 0x04 +#define ENC_MISTAT_SCAN 0x02 +#define ENC_MISTAT_BUSY 0x01 + +/* + * PHID1 and PHID2 values + */ +#define ENC_PHID1_VALUE 0x0083 +#define ENC_PHID2_VALUE 0x1400 +#define ENC_PHID2_MASK 0xFC00 + +#define FAILSAFE_VALUE 5000 + +/* + * Controller memory layout: + * + * 0x0000 - 0x17ff 6k bytes receive buffer + * 0x1800 - 0x1fff 2k bytes transmit buffer + */ +/* Use the lower memory for receiver buffer. See errata pt. 5 */ +#define ENC_RX_BUF_START 0x0000 +#define ENC_TX_BUF_START 0x1800 + +/* taken from the Linux driver */ +#define ENC_RX_BUF_END 0x17ff +#define ENC_TX_BUF_END 0x1fff + +/* maximum frame length */ +#define ENC_MAX_FRM_LEN 1518 + +static unsigned char encReadReg(unsigned char regNo); +static void encWriteReg(unsigned char regNo, unsigned char data); +static void encWriteRegRetry(unsigned char regNo, unsigned char data, int c); +static void encReadBuff(unsigned short length, unsigned char *pBuff); +static void encWriteBuff(unsigned short length, unsigned char *pBuff); +static void encBitSet(unsigned char regNo, unsigned char data); +static void encBitClr(unsigned char regNo, unsigned char data); +static unsigned short encPhyRead(unsigned char addr); +static void encPhyWrite(unsigned char, unsigned short); +static void encReset(void); +static void encInit(unsigned char *pEthAddr); +static void encReceiverReset(void); +static void encReceiverResetCallback(void); +static void encPoll(void); +static void encRx(void); + +#define m_nic_read(reg) encReadReg(reg) +#define m_nic_write(reg, data) encWriteReg(reg, data) +#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count) +#define m_nic_read_data(len, buf) encReadBuff((len), (buf)) +#define m_nic_write_data(len, buf) encWriteBuff((len), (buf)) +/* bit field set */ +#define m_nic_bfs(reg, data) encBitSet(reg, data) +/* bit field clear */ +#define m_nic_bfc(reg, data) encBitClr(reg, data) + + +/* current bank in enc28j60 */ +static unsigned char next_pointer_lsb; +static unsigned char next_pointer_msb; + +static unsigned char buffer[ENC_MAX_FRM_LEN]; +static int rxResetCounter; + +#define RX_RESET_COUNTER 1000; + +/****************************************************************************** + * U-boot network stack interfaces * + *****************************************************************************/ + +/* + * Always returns 0 + */ +int eth_init(bd_t *bis) +{ + unsigned char estatVal; + + /* taken from the Linux driver - dangerous stuff here! */ + /* Wait for CLKRDY to become set (i.e., check that we can + * communicate with the ENC) + */ + do { + estatVal = m_nic_read(CTL_REG_ESTAT); + } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY)); + + /* initialize controller */ + encReset(); + encInit(bis->bi_enetaddr); + + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ + + return 0; +} + +int eth_send(volatile void *packet, int length) +{ + /* check frame length, etc. */ + /* TODO: */ + + /* switch to bank 0 */ + m_nic_bfc(CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + /* set EWRPT */ + m_nic_write(CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff)); + m_nic_write(CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8)); + + /* set ETXND */ + m_nic_write(CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF); + m_nic_write(CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8); + + /* set ETXST */ + m_nic_write(CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF); + m_nic_write(CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8); + + /* write packet */ + m_nic_write_data(length, (unsigned char *) packet); + + /* taken from the Linux driver */ + /* Verify that the internal transmit logic has not been altered + * by excessive collisions. See Errata B4 12 and 14. + */ + if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) { + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST); + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST); + } + m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF)); + + /* set ECON1.TXRTS */ + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRTS); + + return 0; +} + +/* + * Check for received packets. Call NetReceive for each packet. The return + * value is ignored by the caller. + */ +int eth_rx(void) +{ + if (rxResetCounter > 0 && --rxResetCounter == 0) + encReceiverResetCallback(); + + encPoll(); + + return 0; +} + +void eth_halt(void) +{ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */ +} + +/****************************************************************************** + * ENC28J60 interface * + *****************************************************************************/ + +/* + * This function resets the receiver only. This function may be called from + * interrupt-context. + */ +static void encReceiverReset(void) +{ + unsigned char econ1; + + econ1 = m_nic_read(CTL_REG_ECON1); + if ((econ1 & ENC_ECON1_RXRST) == 0) { + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_RXRST); + rxResetCounter = RX_RESET_COUNTER; + } +} + +/* + * receiver reset timer + */ +static void encReceiverResetCallback(void) +{ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_RXRST); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ +} + + +/* + * poll for events + */ +static void encPoll(void) +{ + unsigned char eir_reg; + volatile unsigned char estat_reg; + unsigned char pkt_cnt; + +#ifdef CONFIG_USE_IRQ + /* clear global interrupt enable bit in enc28j60 */ + m_nic_bfc(CTL_REG_EIE, ENC_EIE_INTIE); +#endif + estat_reg = m_nic_read(CTL_REG_ESTAT); + + eir_reg = m_nic_read(CTL_REG_EIR); + + if (eir_reg & ENC_EIR_TXIF) { + /* clear TXIF bit in EIR */ + m_nic_bfc(CTL_REG_EIR, ENC_EIR_TXIF); + } + + /* We have to use pktcnt and not pktif bit, see errata pt. 6 */ + + /* move to bank 1 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL1); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + + /* read pktcnt */ + pkt_cnt = m_nic_read(CTL_REG_EPKTCNT); + + if (pkt_cnt > 0) { + if ((eir_reg & ENC_EIR_PKTIF) == 0) { + /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */ + } + encRx(); + /* clear PKTIF bit in EIR, this should not need to be done + * but it seems like we get problems if we do not */ + m_nic_bfc(CTL_REG_EIR, ENC_EIR_PKTIF); + } + + if (eir_reg & ENC_EIR_RXERIF) { + printf("encPoll: rx error\n"); + m_nic_bfc(CTL_REG_EIR, ENC_EIR_RXERIF); + } + if (eir_reg & ENC_EIR_TXERIF) { + printf("encPoll: tx error\n"); + m_nic_bfc(CTL_REG_EIR, ENC_EIR_TXERIF); + } + +#ifdef CONFIG_USE_IRQ + /* set global interrupt enable bit in enc28j60 */ + m_nic_bfs(CTL_REG_EIE, ENC_EIE_INTIE); +#endif +} + +/* + * Receive packet + */ +static void encRx(void) +{ + unsigned short pkt_len; + unsigned short copy_len; + unsigned short status; + unsigned char eir_reg; + unsigned char pkt_cnt = 0; + unsigned short rxbuf_rdpt; + + /* switch to bank 0 */ + m_nic_bfc(CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + m_nic_write(CTL_REG_ERDPTL, next_pointer_lsb); + m_nic_write(CTL_REG_ERDPTH, next_pointer_msb); + + do { + m_nic_read_data(6, buffer); + next_pointer_lsb = buffer[0]; + next_pointer_msb = buffer[1]; + pkt_len = buffer[2]; + pkt_len |= (unsigned short) buffer[3] << 8; + status = buffer[4]; + status |= (unsigned short) buffer[5] << 8; + + if (pkt_len <= ENC_MAX_FRM_LEN) + copy_len = pkt_len; + else + copy_len = 0; + + if ((status & (1L << 7)) == 0) /* check Received Ok bit */ + copy_len = 0; + + /* taken from the Linux driver */ + /* check if next pointer is resonable */ + if ((((unsigned int)next_pointer_msb << 8) | + (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START) + copy_len = 0; + + if (copy_len > 0) { + m_nic_read_data(copy_len, buffer); + } + + /* advance read pointer to next pointer */ + m_nic_write(CTL_REG_ERDPTL, next_pointer_lsb); + m_nic_write(CTL_REG_ERDPTH, next_pointer_msb); + + /* decrease packet counter */ + m_nic_bfs(CTL_REG_ECON2, ENC_ECON2_PKTDEC); + + /* taken from the Linux driver */ + /* Only odd values should be written to ERXRDPTL, + * see errata B4 pt.13 + */ + rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1; + if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 | + m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt > + (m_nic_read(CTL_REG_ERXNDH) << 8 | + m_nic_read(CTL_REG_ERXNDL)))) { + m_nic_write(CTL_REG_ERXRDPTL, + m_nic_read(CTL_REG_ERXNDL)); + m_nic_write(CTL_REG_ERXRDPTH, + m_nic_read(CTL_REG_ERXNDH)); + } else { + m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF); + m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8); + } + + /* move to bank 1 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL1); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + + /* read pktcnt */ + pkt_cnt = m_nic_read(CTL_REG_EPKTCNT); + + /* switch to bank 0 */ + m_nic_bfc(CTL_REG_ECON1, + (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + if (copy_len == 0) { + eir_reg = m_nic_read(CTL_REG_EIR); + encReceiverReset(); + printf("eth_rx: copy_len=0\n"); + continue; + } + + NetReceive((unsigned char *) buffer, pkt_len); + + eir_reg = m_nic_read(CTL_REG_EIR); + } while (pkt_cnt); + /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */ +} + +static void encInit(unsigned char *pEthAddr) +{ + unsigned short phid1 = 0; + unsigned short phid2 = 0; + + /* switch to bank 0 */ + m_nic_bfc(CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); + + /* + * Setup the buffer space. The reset values are valid for the + * other pointers. + */ + /* We shall not write to ERXST, see errata pt. 5. Instead we + have to make sure that ENC_RX_BUS_START is 0. */ + m_nic_write_retry(CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1); + m_nic_write_retry(CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1); + + /* taken from the Linux driver */ + m_nic_write_retry(CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1); + m_nic_write_retry(CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1); + + m_nic_write_retry(CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1); + m_nic_write_retry(CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1); + + next_pointer_lsb = (ENC_RX_BUF_START & 0xFF); + next_pointer_msb = (ENC_RX_BUF_START >> 8); + + /* verify identification */ + phid1 = encPhyRead(PHY_REG_PHID1); + phid2 = encPhyRead(PHY_REG_PHID2); + + if (phid1 != ENC_PHID1_VALUE + || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) { + printf("ERROR: failed to identify controller\n"); + printf("phid1 = %x, phid2 = %x\n", + phid1, (phid2 & ENC_PHID2_MASK)); + printf("should be phid1 = %x, phid2 = %x\n", + ENC_PHID1_VALUE, ENC_PHID2_VALUE); + } + + /* + * --- MAC Initialization --- + */ + + /* Pull MAC out of Reset */ + + /* switch to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* enable MAC to receive frames */ + /* added some bits from the Linux driver */ + m_nic_write_retry(CTL_REG_MACON1 + , (ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS) + , 10); + + /* configure pad, tx-crc and duplex */ + /* added a bit from the Linux driver */ + m_nic_write_retry(CTL_REG_MACON3 + , (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN) + , 10); + + /* added 4 new lines from the Linux driver */ + /* Allow infinite deferals if the medium is continously busy */ + m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10); + + /* Late collisions occur beyond 63 bytes */ + m_nic_write_retry(CTL_REG_MACLCON2, 63, 10); + + /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */ + m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10); + + /* + * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended + * 0x0c for half-duplex. Nothing for full-duplex + */ + m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10); + + /* set maximum frame length */ + m_nic_write_retry(CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10); + m_nic_write_retry(CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10); + + /* + * Set MAC back-to-back inter-packet gap. Recommended 0x12 for + * half duplex and 0x15 for full duplex. + */ + m_nic_write_retry(CTL_REG_MABBIPG, 0x12, 10); + + /* set MAC address */ + + /* switch to bank 3 */ + m_nic_bfs(CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1)); + + m_nic_write_retry(CTL_REG_MAADR0, pEthAddr[5], 1); + m_nic_write_retry(CTL_REG_MAADR1, pEthAddr[4], 1); + m_nic_write_retry(CTL_REG_MAADR2, pEthAddr[3], 1); + m_nic_write_retry(CTL_REG_MAADR3, pEthAddr[2], 1); + m_nic_write_retry(CTL_REG_MAADR4, pEthAddr[1], 1); + m_nic_write_retry(CTL_REG_MAADR5, pEthAddr[0], 1); + + /* + * PHY Initialization taken from the Linux driver + */ + + /* Prevent automatic loopback of data beeing transmitted by setting + ENC_PHCON2_HDLDIS */ + encPhyWrite(PHY_REG_PHCON2, (1<<8)); + + /* LEDs configuration + * LEDA: LACFG = 0100 -> display link status + * LEDB: LBCFG = 0111 -> display TX & RX activity + * STRCH = 1 -> LED pulses + */ + encPhyWrite(PHY_REG_PHLCON, 0x0472); + + /* Reset PDPXMD-bit => half duplex */ + encPhyWrite(PHY_REG_PHCON1, 0); + + /* + * Receive settings + */ + +#ifdef CONFIG_USE_IRQ + /* enable interrupts */ + m_nic_bfs(CTL_REG_EIE, ENC_EIE_PKTIE); + m_nic_bfs(CTL_REG_EIE, ENC_EIE_TXIE); + m_nic_bfs(CTL_REG_EIE, ENC_EIE_RXERIE); + m_nic_bfs(CTL_REG_EIE, ENC_EIE_TXERIE); + m_nic_bfs(CTL_REG_EIE, ENC_EIE_INTIE); +#endif +} + +/* + * + * Description: + * Read PHY registers. + * + * NOTE! This function will change to Bank 2. + * + * Params: + * [in] addr address of the register to read + * + * Returns: + * The value in the register + */ +static unsigned short encPhyRead(unsigned char addr) +{ + unsigned short ret = 0; + + /* move to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* write address to MIREGADR */ + m_nic_write(CTL_REG_MIREGADR, addr); + + /* set MICMD.MIIRD */ + m_nic_write(CTL_REG_MICMD, ENC_MICMD_MIIRD); + + /* taken from the Linux driver */ + /* move to bank 3 */ + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* poll MISTAT.BUSY bit until operation is complete */ + while ((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { + static int cnt; + + if (cnt++ >= 1000) { + /* GJ - this seems extremely dangerous! */ + /* printf("#"); */ + cnt = 0; + } + } + + /* taken from the Linux driver */ + /* move to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* clear MICMD.MIIRD */ + m_nic_write(CTL_REG_MICMD, 0); + + ret = (m_nic_read(CTL_REG_MIRDH) << 8); + ret |= (m_nic_read(CTL_REG_MIRDL) & 0xFF); + + return ret; +} + +/* + * Taken from the Linux driver. + * Description: + * Write PHY registers. + * + * NOTE! This function will change to Bank 3. + * + * Params: + * [in] addr address of the register to write to + * [in] data to be written + * + * Returns: + * None + */ +static void encPhyWrite(unsigned char addr, unsigned short data) +{ + /* move to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* write address to MIREGADR */ + m_nic_write(CTL_REG_MIREGADR, addr); + + m_nic_write(CTL_REG_MIWRL, data & 0xff); + m_nic_write(CTL_REG_MIWRH, data >> 8); + + /* move to bank 3 */ + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* poll MISTAT.BUSY bit until operation is complete */ + while ((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { + static int cnt; + + if (cnt++ >= 1000) { + cnt = 0; + } + } +} + +/****************************************************************************** + * ENC28J60 SPI layer * + *****************************************************************************/ + +/* Phase = 0, Polarity = 0 */ +#define enc_cfg_spi() \ + spi_set_cfg(CONFIG_ENC28J60_ETH_SPI_BUS, CONFIG_ENC28J60_ETH_SPI_CS, 0) + +static void encWriteReg(unsigned char regNo, unsigned char data) +{ + char dout[2]; + char din[1]; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0x40 | regNo; + dout[1] = data; + spi_txrx(dout, 2, 0, 0, SPI_START | SPI_STOP); + + dout[0] = 0x1f; + spi_txrx(dout, 1, din, 1, SPI_START | SPI_STOP); + + spi_unlock(); +} + +static void encWriteRegRetry(unsigned char regNo, unsigned char data, int c) +{ + unsigned char readback; + int i; + + for (i = 0; i < c; i++) { + encWriteReg(regNo, data); + readback = encReadReg(regNo); + if (readback == data) + break; + } + + if (i == c) + printf("enc28j60: write reg %d failed\n", regNo); +} + +static unsigned char encReadReg(unsigned char regNo) +{ + char dout[1]; + char din[2]; + char rxByte; + unsigned char bank; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0x1f; + spi_txrx(dout, 1, din, 1, SPI_START | SPI_STOP); + bank = din[0] & 0x3; + + dout[0] = regNo; + spi_txrx(dout, 1, din, 2, SPI_START | SPI_STOP); + rxByte = din[0]; + + /* check if MAC or MII register */ + if (((bank == 2) && (regNo <= 0x1a)) || + ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) + /* ignore first byte and read another byte */ + rxByte = din[0]; + else + rxByte = din[1]; + + spi_unlock(); + + return rxByte; +} + +static void encReadBuff(unsigned short length, unsigned char *pBuff) +{ + char dout[1]; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0x20 | 0x1a; + spi_txrx(dout, 1, pBuff, length, SPI_START | SPI_STOP); + + spi_unlock(); +} + +static void encWriteBuff(unsigned short length, unsigned char *pBuff) +{ + char dout[2]; + + spi_lock(); + enc_cfg_spi(); + + /* Sent command and control word, do not deasser CS */ + dout[0] = 0x60 | 0x1a; + dout[1] = 0x0; + spi_txrx(dout, 2, 0, 0, SPI_START); + + /* Send data and deassert CS */ + spi_txrx(pBuff, length, 0, 0, SPI_STOP); + + spi_unlock(); +} + +static void encBitSet(unsigned char regNo, unsigned char data) +{ + char dout[2]; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0x80 | regNo; /* Bit field set */ + dout[1] = data; + spi_txrx(dout, 2, 0, 0, SPI_START | SPI_STOP); + + spi_unlock(); +} + +static void encBitClr(unsigned char regNo, unsigned char data) +{ + char dout[2]; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0xa0 | regNo; /* Bit field clear */ + dout[1] = data; + spi_txrx(dout, 2, 0, 0, SPI_START | SPI_STOP); + + spi_unlock(); +} + +static void encReset(void) +{ + char dout[1]; + + spi_lock(); + enc_cfg_spi(); + + dout[0] = 0xff; + spi_txrx(dout, 1, 0, 0, SPI_START | SPI_STOP); + + spi_unlock(); + + /* sleep 1 ms. See errata pt. 2 */ + udelay(1000); +} + +#ifndef CONFIG_ETHADDR +#include +void enc_set_mac_addr(uchar *addr) +{ + if (NULL == getenv("ethaddr")) { + + char reg[8]; + char nid[20]; + ulong *s; + + /*set this bit to open the OTP banks for reading*/ + REG_SET(OCOTP_BASE + OCOTP_CTRL, CTRL_RD_BANK_OPEN); + + /*wait until OTP contents are readable*/ + while (CTRL_BUSY & REG_RD(OCOTP_BASE + OCOTP_CTRL)) + udelay(100); + + s = (ulong *)reg; + /*read register HW_OCOTP_CUST0*/ + *s = REG_RD(OCOTP_BASE + OCOTP_CUST0); + addr[3] = reg[0]; + addr[2] = reg[1]; + addr[1] = reg[2]; + addr[0] = reg[3]; + + s = s + 1; + /*read register HW_OCOTP_CUST1*/ + *s = REG_RD(OCOTP_BASE + OCOTP_CUST1); + addr[5] = reg[4]; + addr[4] = reg[5]; + + /*clear this bit to avoid current drain*/ + REG_CLR(OCOTP_BASE + OCOTP_CTRL, CTRL_RD_BANK_OPEN); + + sprintf(nid, "%02X:%02X:%02X:%02X:%02X:%02X", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + setenv("ethaddr", nid); + } +} +#endif +#endif /* CONFIG_ENC28J60_ETH */ -- cgit v1.1