From 2439e4bfa111babf4bc07ba20efbf3e36036813e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 21 Nov 2007 21:19:24 +0100 Subject: drivers/net : move net drivers to drivers/net Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/net/sk98lin/skgepnmi.c | 8310 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 8310 insertions(+) create mode 100644 drivers/net/sk98lin/skgepnmi.c (limited to 'drivers/net/sk98lin/skgepnmi.c') diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c new file mode 100644 index 0000000..b5d32b0 --- /dev/null +++ b/drivers/net/sk98lin/skgepnmi.c @@ -0,0 +1,8310 @@ +/***************************************************************************** + * + * Name: skgepnmi.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.102 $ + * Date: $Date: 2002/12/16 14:03:24 $ + * Purpose: Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/***************************************************************************** + * + * History: + * + * $Log: skgepnmi.c,v $ + * Revision 1.102 2002/12/16 14:03:24 tschilli + * VCT code in Vct() changed. + * + * Revision 1.101 2002/12/16 09:04:10 tschilli + * Code for VCT handling added. + * + * Revision 1.100 2002/09/26 14:28:13 tschilli + * For XMAC the values in the SK_PNMI_PORT Port struct are copied to + * the new SK_PNMI_PORT BufPort struct during a MacUpdate() call. + * These values are used when GetPhysStatVal() is called. With this + * mechanism you get the best results when software corrections for + * counters are needed. Example: RX_LONGFRAMES. + * + * Revision 1.99 2002/09/17 12:31:19 tschilli + * OID_SKGE_TX_HW_ERROR_CTS, OID_SKGE_OUT_ERROR_CTS, OID_GEN_XMIT_ERROR: + * Double count of SK_PNMI_HTX_EXCESS_COL in function General() removed. + * OID_PNP_CAPABILITIES: sizeof(SK_PM_WAKE_UP_CAPABILITIES) changed to + * sizeof(SK_PNP_CAPABILITIES) in function PowerManagement(). + * + * Revision 1.98 2002/09/10 09:00:03 rwahl + * Adapted boolean definitions according sktypes. + * + * Revision 1.97 2002/09/05 15:07:03 rwahl + * Editorial changes. + * + * Revision 1.96 2002/09/05 11:04:14 rwahl + * - Rx/Tx packets statistics of virtual port were zero on link down (#10750) + * - For GMAC the overflow IRQ for Rx longframe counter was not counted. + * - Incorrect calculation for oids OID_SKGE_RX_HW_ERROR_CTS, + * OID_SKGE_IN_ERRORS_CTS, OID_GEN_RCV_ERROR. + * - Moved correction for OID_SKGE_STAT_RX_TOO_LONG to GetPhysStatVal(). + * - Editorial changes. + * + * Revision 1.95 2002/09/04 08:53:37 rwahl + * - Incorrect statistics for Rx_too_long counter with jumbo frame (#10751) + * - StatRxFrameTooLong & StatRxPMaccErr counters were not reset. + * - Fixed compiler warning for debug msg arg types. + * + * Revision 1.94 2002/08/09 15:42:14 rwahl + * - Fixed StatAddr table for GMAC. + * - VirtualConf(): returned indeterminated status for speed oids if no + * active port. + * + * Revision 1.93 2002/08/09 11:04:59 rwahl + * Added handler for link speed caps. + * + * Revision 1.92 2002/08/09 09:43:03 rwahl + * - Added handler for NDIS OID_PNP_xxx ids. + * + * Revision 1.91 2002/07/17 19:53:03 rwahl + * - Added StatOvrflwBit table for XMAC & GMAC. + * - Extended StatAddr table for GMAC. Added check of number of counters + * in enumeration and size of StatAddr table on init level. + * - Added use of GIFunc table. + * - ChipSet is not static anymore, + * - Extended SIRQ event handler for both mac types. + * - Fixed rx short counter bug (#10620) + * - Added handler for oids SKGE_SPEED_MODE & SKGE_SPEED_STATUS. + * - Extendet GetPhysStatVal() for GMAC. + * - Editorial changes. + * + * Revision 1.90 2002/05/22 08:56:25 rwahl + * - Moved OID table to separate source file. + * - Fix: TX_DEFFERAL counter incremented in full-duplex mode. + * - Use string definitions for error msgs. + * + * Revision 1.89 2001/09/18 10:01:30 mkunz + * some OID's fixed for dualnetmode + * + * Revision 1.88 2001/08/02 07:58:08 rwahl + * - Fixed NetIndex to csum module at ResetCounter(). + * + * Revision 1.87 2001/04/06 13:35:09 mkunz + * -Bugs fixed in handling of OID_SKGE_MTU and the VPD OID's + * + * Revision 1.86 2001/03/09 09:18:03 mkunz + * Changes in SK_DBG_MSG + * + * Revision 1.85 2001/03/08 09:37:31 mkunz + * Bugfix in ResetCounter for Pnmi.Port structure + * + * Revision 1.84 2001/03/06 09:04:55 mkunz + * Made some changes in instance calculation + * + * Revision 1.83 2001/02/15 09:15:32 mkunz + * Necessary changes for dual net mode added + * + * Revision 1.82 2001/02/07 08:24:19 mkunz + * -Made changes in handling of OID_SKGE_MTU + * + * Revision 1.81 2001/02/06 09:58:00 mkunz + * -Vpd bug fixed + * -OID_SKGE_MTU added + * -pnmi support for dual net mode. Interface function and macros extended + * + * Revision 1.80 2001/01/22 13:41:35 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.79 2000/12/05 14:57:40 cgoos + * SetStruct failed before first Link Up (link mode of virtual + * port "INDETERMINATED"). + * + * Revision 1.78 2000/09/12 10:44:58 cgoos + * Fixed SK_PNMI_STORE_U32 calls with typecasted argument. + * + * Revision 1.77 2000/09/07 08:10:19 rwahl + * - Modified algorithm for 64bit NDIS statistic counters; + * returns 64bit or 32bit value depending on passed buffer + * size. Indicate capability for 64bit NDIS counter, if passed + * buffer size is zero. OID_GEN_XMIT_ERROR, OID_GEN_RCV_ERROR, + * and OID_GEN_RCV_NO_BUFFER handled as 64bit counter, too. + * - corrected OID_SKGE_RLMT_PORT_PREFERRED. + * + * Revision 1.76 2000/08/03 15:23:39 rwahl + * - Correction for FrameTooLong counter has to be moved to OID handling + * routines (instead of statistic counter routine). + * - Fix in XMAC Reset Event handling: Only offset counter for hardware + * statistic registers are updated. + * + * Revision 1.75 2000/08/01 16:46:05 rwahl + * - Added StatRxLongFrames counter and correction of FrameTooLong counter. + * - Added directive to control width (default = 32bit) of NDIS statistic + * counters (SK_NDIS_64BIT_CTR). + * + * Revision 1.74 2000/07/04 11:41:53 rwahl + * - Added volition connector type. + * + * Revision 1.73 2000/03/15 16:33:10 rwahl + * Fixed bug 10510; wrong reset of virtual port statistic counters. + * + * Revision 1.72 1999/12/06 16:15:53 rwahl + * Fixed problem of instance range for current and factory MAC address. + * + * Revision 1.71 1999/12/06 10:14:20 rwahl + * Fixed bug 10476; set operation for PHY_OPERATION_MODE. + * + * Revision 1.70 1999/11/22 13:33:34 cgoos + * Changed license header to GPL. + * + * Revision 1.69 1999/10/18 11:42:15 rwahl + * Added typecasts for checking event dependent param (debug only). + * + * Revision 1.68 1999/10/06 09:35:59 cgoos + * Added state check to PHY_READ call (hanged if called during startup). + * + * Revision 1.67 1999/09/22 09:53:20 rwahl + * - Read Broadcom register for updating fcs error counter (1000Base-T). + * + * Revision 1.66 1999/08/26 13:47:56 rwahl + * Added SK_DRIVER_SENDEVENT when queueing RLMT_CHANGE_THRES trap. + * + * Revision 1.65 1999/07/26 07:49:35 cgoos + * Added two typecasts to avoid compiler warnings. + * + * Revision 1.64 1999/05/20 09:24:12 cgoos + * Changes for 1000Base-T (sensors, Master/Slave). + * + * Revision 1.63 1999/04/13 15:11:58 mhaveman + * Moved include of rlmt.h to header skgepnmi.h because some macros + * are needed there. + * + * Revision 1.62 1999/04/13 15:08:07 mhaveman + * Replaced again SK_RLMT_CHECK_LINK with SK_PNMI_RLMT_MODE_CHK_LINK + * to grant unified interface by only using the PNMI header file. + * SK_PNMI_RLMT_MODE_CHK_LINK is defined the same as SK_RLMT_CHECK_LINK. + * + * Revision 1.61 1999/04/13 15:02:48 mhaveman + * Changes caused by review: + * -Changed some comments + * -Removed redundant check for OID_SKGE_PHYS_FAC_ADDR + * -Optimized PRESET check. + * -Meaning of error SK_ADDR_DUPLICATE_ADDRESS changed. Set of same + * address will now not cause this error. Removed corresponding check. + * + * Revision 1.60 1999/03/23 10:41:23 mhaveman + * Added comments. + * + * Revision 1.59 1999/02/19 08:01:28 mhaveman + * Fixed bug 10372 that after counter reset all ports were displayed + * as inactive. + * + * Revision 1.58 1999/02/16 18:04:47 mhaveman + * Fixed problem of twisted OIDs SENSOR_WAR_TIME and SENSOR_ERR_TIME. + * + * Revision 1.56 1999/01/27 12:29:11 mhaveman + * SkTimerStart was called with time value in milli seconds but needs + * micro seconds. + * + * Revision 1.55 1999/01/25 15:00:38 mhaveman + * Added support to allow multiple ports to be active. If this feature in + * future will be used, the Management Data Base variables PORT_ACTIVE + * and PORT_PREFERED should be moved to the port specific part of RLMT. + * Currently they return the values of the first active physical port + * found. A set to the virtual port will actually change all active + * physical ports. A get returns the melted values of all active physical + * ports. If the port values differ a return value INDETERMINATED will + * be returned. This effects especially the CONF group. + * + * Revision 1.54 1999/01/19 10:10:22 mhaveman + * -Fixed bug 10354: Counter values of virtual port were wrong after port + * switches + * -Added check if a switch to the same port is notified. + * + * Revision 1.53 1999/01/07 09:25:21 mhaveman + * Forgot to initialize a variable. + * + * Revision 1.52 1999/01/05 10:34:33 mhaveman + * Fixed little error in RlmtChangeEstimate calculation. + * + * Revision 1.51 1999/01/05 09:59:07 mhaveman + * -Moved timer start to init level 2 + * -Redesigned port switch average calculation to avoid 64bit + * arithmetic. + * + * Revision 1.50 1998/12/10 15:13:59 mhaveman + * -Fixed: PHYS_CUR_ADDR returned wrong addresses + * -Fixed: RLMT_PORT_PREFERED and RLMT_CHANGE_THRES preset returned + * always BAD_VALUE. + * -Fixed: TRAP buffer seemed to sometimes suddenly empty + * + * Revision 1.49 1998/12/09 16:17:07 mhaveman + * Fixed: Couldnot delete VPD keys on UNIX. + * + * Revision 1.48 1998/12/09 14:11:10 mhaveman + * -Add: Debugmessage for XMAC_RESET supressed to minimize output. + * -Fixed: RlmtChangeThreshold will now be initialized. + * -Fixed: VPD_ENTRIES_LIST extended value with unnecessary space char. + * -Fixed: On VPD key creation an invalid key name could be created + * (e.g. A5) + * -Some minor changes in comments and code. + * + * Revision 1.47 1998/12/08 16:00:31 mhaveman + * -Fixed: For RLMT_PORT_ACTIVE will now be returned a 0 if no port + * is active. + * -Fixed: For the RLMT statistics group only the last value was + * returned and the rest of the buffer was filled with 0xff + * -Fixed: Mysteriously the preset on RLMT_MODE still returned + * BAD_VALUE. + * Revision 1.46 1998/12/08 10:04:56 mhaveman + * -Fixed: Preset on RLMT_MODE returned always BAD_VALUE error. + * -Fixed: Alignment error in GetStruct + * -Fixed: If for Get/Preset/SetStruct the buffer size is equal or + * larger than SK_PNMI_MIN_STRUCT_SIZE the return value is stored + * to the buffer. In this case the caller should always return + * ok to its upper routines. Only if the buffer size is less + * than SK_PNMI_MIN_STRUCT_SIZE and the return value is unequal + * to 0, an error should be returned by the caller. + * -Fixed: Wrong number of instances with RLMT statistic. + * -Fixed: Return now SK_LMODE_STAT_UNKNOWN if the LinkModeStatus is 0. + * + * Revision 1.45 1998/12/03 17:17:24 mhaveman + * -Removed for VPD create action the buffer size limitation to 4 bytes. + * -Pass now physical/active physical port to ADDR for CUR_ADDR set + * + * Revision 1.44 1998/12/03 15:14:35 mhaveman + * Another change to Vpd instance evaluation. + * + * Revision 1.43 1998/12/03 14:18:10 mhaveman + * -Fixed problem in PnmiSetStruct. It was impossible to set any value. + * -Removed VPD key evaluation for VPD_FREE_BYTES and VPD_ACTION. + * + * Revision 1.42 1998/12/03 11:31:47 mhaveman + * Inserted cast to satisfy lint. + * + * Revision 1.41 1998/12/03 11:28:16 mhaveman + * Removed SK_PNMI_CHECKPTR + * + * Revision 1.40 1998/12/03 11:19:07 mhaveman + * Fixed problems + * -A set to virtual port will now be ignored. A set with broadcast + * address to any port will be ignored. + * -GetStruct function made VPD instance calculation wrong. + * -Prefered port returned -1 instead of 0. + * + * Revision 1.39 1998/11/26 15:30:29 mhaveman + * Added sense mode to link mode. + * + * Revision 1.38 1998/11/23 15:34:00 mhaveman + * -Fixed bug for RX counters. On an RX overflow interrupt the high + * words of all RX counters were incremented. + * -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the + * value 0, which has no effect. It is usefull for multiple instance + * SETs. + * + * Revision 1.37 1998/11/20 08:02:04 mhaveman + * -Fixed: Ports were compared with MAX_SENSORS + * -Fixed: Crash in GetTrapEntry with MEMSET macro + * -Fixed: Conversions between physical, logical port index and instance + * + * Revision 1.36 1998/11/16 07:48:53 mhaveman + * Casted SK_DRIVER_SENDEVENT with (void) to eleminate compiler warnings + * on Solaris. + * + * Revision 1.35 1998/11/16 07:45:34 mhaveman + * SkAddrOverride now returns value and will be checked. + * + * Revision 1.34 1998/11/10 13:40:37 mhaveman + * Needed to change interface, because NT driver needs a return value + * of needed buffer space on TOO_SHORT errors. Therefore all + * SkPnmiGet/Preset/Set functions now have a pointer to the length + * parameter, where the needed space on error is returned. + * + * Revision 1.33 1998/11/03 13:52:46 mhaveman + * Made file lint conform. + * + * Revision 1.32 1998/11/03 13:19:07 mhaveman + * The events SK_HWEV_SET_LMODE and SK_HWEV_SET_FLOWMODE pass now in + * Para32[0] the physical MAC index and in Para32[1] the new mode. + * + * Revision 1.31 1998/11/03 12:30:40 gklug + * fix: compiler warning memset + * + * Revision 1.30 1998/11/03 12:04:46 mhaveman + * Fixed problem in SENSOR_VALUE, which wrote beyond the buffer end + * Fixed alignment problem with CHIPSET. + * + * Revision 1.29 1998/11/02 11:23:54 mhaveman + * Corrected SK_ERROR_LOG to SK_ERR_LOG. Sorry. + * + * Revision 1.28 1998/11/02 10:47:16 mhaveman + * Added syslog messages for internal errors. + * + * Revision 1.27 1998/10/30 15:48:06 mhaveman + * Fixed problems after simulation of SK_PNMI_EVT_CHG_EST_TIMER and + * RlmtChangeThreshold calculation. + * + * Revision 1.26 1998/10/29 15:36:55 mhaveman + * -Fixed bug in trap buffer handling. + * -OID_SKGE_DRIVER_DESCR, OID_SKGE_DRIVER_VERSION, OID_SKGE_HW_DESCR, + * OID_SKGE_HW_VERSION, OID_SKGE_VPD_ENTRIES_LIST, OID_SKGE_VPD_KEY, + * OID_SKGE_VPD_VALUE, and OID_SKGE_SENSOR_DESCR return values with + * a leading octet before each string storing the string length. + * -Perform a RlmtUpdate during SK_PNMI_EVT_XMAC_RESET to minimize + * RlmtUpdate calls in GetStatVal. + * -Inserted SK_PNMI_CHECKFLAGS macro increase readability. + * + * Revision 1.25 1998/10/29 08:50:36 mhaveman + * Fixed problems after second event simulation. + * + * Revision 1.24 1998/10/28 08:44:37 mhaveman + * -Fixed alignment problem + * -Fixed problems during event simulation + * -Fixed sequence of error return code (INSTANCE -> ACCESS -> SHORT) + * -Changed type of parameter Instance back to SK_U32 because of VPD + * -Updated new VPD function calls + * + * Revision 1.23 1998/10/23 10:16:37 mhaveman + * Fixed bugs after buffer test simulation. + * + * Revision 1.22 1998/10/21 13:23:52 mhaveman + * -Call syntax of SkOsGetTime() changed to SkOsGetTime(pAc). + * -Changed calculation of hundrets of seconds. + * + * Revision 1.20 1998/10/20 07:30:45 mhaveman + * Made type changes to unsigned integer where possible. + * + * Revision 1.19 1998/10/19 10:51:30 mhaveman + * -Made Bug fixes after simulation run + * -Renamed RlmtMAC... to RlmtPort... + * -Marked workarounds with Errata comments + * + * Revision 1.18 1998/10/14 07:50:08 mhaveman + * -For OID_SKGE_LINK_STATUS the link down detection has moved from RLMT + * to HWACCESS. + * -Provided all MEMCPY/MEMSET macros with (char *) pointers, because + * Solaris throwed warnings when mapping to bcopy/bset. + * + * Revision 1.17 1998/10/13 07:42:01 mhaveman + * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA + * -Removed old cvs history entries + * -Renamed MacNumber to PortNumber + * + * Revision 1.16 1998/10/07 10:52:49 mhaveman + * -Inserted handling of some OID_GEN_ Ids for windows + * -Fixed problem with 803.2 statistic. + * + * Revision 1.15 1998/10/01 09:16:29 mhaveman + * Added Debug messages for function call and UpdateFlag tracing. + * + * Revision 1.14 1998/09/30 13:39:09 mhaveman + * -Reduced namings of 'MAC' by replacing them with 'PORT'. + * -Completed counting of OID_SKGE_RX_HW_ERROR_CTS, + * OID_SKGE_TX_HW_ERROR_CTS, + * OID_SKGE_IN_ERRORS_CTS, and OID_SKGE_OUT_ERROR_CTS. + * -SET check for RlmtMode + * + * Revision 1.13 1998/09/28 13:13:08 mhaveman + * Hide strcmp, strlen, and strncpy behind macros SK_STRCMP, SK_STRLEN, + * and SK_STRNCPY. (Same reasons as for mem.. and MEM..) + * + * Revision 1.12 1998/09/16 08:18:36 cgoos + * Fix: XM_INxx and XM_OUTxx called with different parameter order: + * sometimes IoC,Mac,... sometimes Mac,IoC,... Now always first variant. + * Fix: inserted "Pnmi." into some pAC->pDriverDescription / Version. + * Change: memset, memcpy to makros SK_MEMSET, SK_MEMCPY + * + * Revision 1.11 1998/09/04 17:01:45 mhaveman + * Added SyncCounter as macro and OID_SKGE_.._NO_DESCR_CTS to + * OID_SKGE_RX_NO_BUF_CTS. + * + * Revision 1.10 1998/09/04 14:35:35 mhaveman + * Added macro counters, that are counted by driver. + * + ****************************************************************************/ + + +#include + +#ifdef CONFIG_SK98 + +static const char SysKonnectFileId[] = + "@(#) $Id: skgepnmi.c,v 1.102 2002/12/16 14:03:24 tschilli Exp $" + " (C) SysKonnect."; + +#include "h/skdrv1st.h" +#include "h/sktypes.h" +#include "h/xmac_ii.h" +#include "h/skdebug.h" +#include "h/skqueue.h" +#include "h/skgepnmi.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skdrv2nd.h" +#include "h/skgepnm2.h" +#ifdef SK_POWER_MGMT +#include "h/skgepmgt.h" +#endif +/* defines *******************************************************************/ + +#ifndef DEBUG +#define PNMI_STATIC static +#else /* DEBUG */ +#define PNMI_STATIC +#endif /* DEBUG */ + +/* + * Public Function prototypes + */ +int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level); +int SkPnmiGetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +int SkPnmiPreSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param); + + +/* + * Private Function prototypes + */ + +PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac); +PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf); +PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC, + unsigned int PhysPortIndex, unsigned int StatIndex); +PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex, + unsigned int StatIndex, SK_U32 NetIndex); +PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size); +PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen, + unsigned int *pEntries); +PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr, + unsigned int KeyArrLen, unsigned int *pKeyNo); +PNMI_STATIC int LookupId(SK_U32 Id); +PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac, + unsigned int LastMac); +PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac); +PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int PortIndex); +PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int SensorIndex); +PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId); +PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC); +PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf); +PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf, + unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32); + +/* + * Table to correlate OID with handler function and index to + * hardware register stored in StatAddress if applicable. + */ +#include "skgemib.c" + +/* global variables **********************************************************/ + +/* + * Overflow status register bit table and corresponding counter + * dependent on MAC type - the number relates to the size of overflow + * mask returned by the pFnMacOverflow function + */ +PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = { +/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST}, +/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST}, +/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC}, +/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST}, +/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW}, +/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH}, +/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64}, +/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127}, +/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255}, +/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511}, +/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023}, +/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX}, +/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES}, +/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED}, +/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL}, +/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL}, +/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL}, +/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL}, +/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL}, +/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN}, +/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED}, +/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED}, +/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED}, +/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED}, +/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED}, +/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED}, +/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST}, +/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST}, +/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC}, +/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST}, +/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS}, +/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED}, +/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW}, +/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH}, +/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW}, +/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH}, +/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE}, +/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT}, +/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64}, +/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127}, +/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255}, +/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511}, +/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023}, +/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX}, +/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES}, +/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG}, +/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER}, +/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED}, +/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW}, +/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED}, +/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED}, +/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED}, +/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED}, +/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED}, +/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED}, +/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED}, +/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED}, +/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED} +}; + +/* + * Table for hardware register saving on resets and port switches + */ +PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = { + /* SK_PNMI_HTX */ + {{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_OCTETHIGH */ + {{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HTX_OCTETLOW */ + {{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HTX_BROADCAST */ + {{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_MULTICAST */ + {{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_UNICAST */ + {{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_BURST */ + {{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_PMACC */ + {{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HTX_MACC */ + {{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_COL */ + {{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}}, + /* SK_PNMI_HTX_SINGLE_COL */ + {{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}}, + /* SK_PNMI_HTX_MULTI_COL */ + {{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}}, + /* SK_PNMI_HTX_EXCESS_COL */ + {{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}}, + /* SK_PNMI_HTX_LATE_COL */ + {{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}}, + /* SK_PNMI_HTX_DEFFERAL */ + {{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_EXCESS_DEF */ + {{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UNDERRUN */ + {{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}}, + /* SK_PNMI_HTX_CARRIER */ + {{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_64 */ + {{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}}, + /* SK_PNMI_HTX_127 */ + {{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}}, + /* SK_PNMI_HTX_255 */ + {{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}}, + /* SK_PNMI_HTX_511 */ + {{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}}, + /* SK_PNMI_HTX_1023 */ + {{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}}, + /* SK_PNMI_HTX_MAX */ + {{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}}, + /* SK_PNMI_HTX_LONGFRAMES */ + {{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HTX_SYNC */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_SYNC_OCTET */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX */ + {{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_OCTETHIGH */ + {{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HRX_OCTETLOW */ + {{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HRX_BADOCTETHIGH */ + {{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}}, + /* SK_PNMI_HRX_BADOCTETLOW */ + {{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}}, + /* SK_PNMI_HRX_BROADCAST */ + {{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_MULTICAST */ + {{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_UNICAST */ + {{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_PMACC */ + {{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HRX_MACC */ + {{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_PMACC_ERR */ + {{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MACC_UNKWN */ + {{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_BURST */ + {{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MISSED */ + {{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_FRAMING */ + {{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UNDERSIZE */ + {{0, SK_FALSE},{GM_RXF_SHT, SK_TRUE}}, + /* SK_PNMI_HRX_OVERFLOW */ + {{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}}, + /* SK_PNMI_HRX_JABBER */ + {{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}}, + /* SK_PNMI_HRX_CARRIER */ + {{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_IRLENGTH */ + {{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SYMBOL */ + {{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SHORTS */ + {{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_RUNT */ + {{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}}, + /* SK_PNMI_HRX_TOO_LONG */ + {{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_FCS */ + {{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_CEXT */ + {{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_64 */ + {{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}}, + /* SK_PNMI_HRX_127 */ + {{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}}, + /* SK_PNMI_HRX_255 */ + {{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}}, + /* SK_PNMI_HRX_511 */ + {{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}}, + /* SK_PNMI_HRX_1023 */ + {{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}}, + /* SK_PNMI_HRX_MAX */ + {{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}}, + /* SK_PNMI_HRX_LONGFRAMES */ + {{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HRX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}} +}; + + +/***************************************************************************** + * + * Public functions + * + */ + +/***************************************************************************** + * + * SkPnmiInit - Init function of PNMI + * + * Description: + * SK_INIT_DATA: Initialises the data structures + * SK_INIT_IO: Resets the XMAC statistics, determines the device and + * connector type. + * SK_INIT_RUN: Starts a timer event for port switch per hour + * calculation. + * + * Returns: + * Always 0 + */ +int SkPnmiInit( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Level) /* Initialization level */ +{ + unsigned int PortMax; /* Number of ports */ + unsigned int PortIndex; /* Current port index in loop */ + SK_U16 Val16; /* Multiple purpose 16 bit variable */ + SK_U8 Val8; /* Mulitple purpose 8 bit variable */ + SK_EVPARA EventParam; /* Event struct for timer event */ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiInit: Called, level=%d\n", Level)); + + switch (Level) { + + case SK_INIT_DATA: + SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi)); + pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN; + pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES; + for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) { + + pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE; + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + +#ifdef SK_PNMI_CHECK + if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("CounterOffset struct size (%d) differs from" + "SK_PNMI_MAX_IDX (%d)\n", + SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX)); + BRK; + } + + if (SK_PNMI_MAX_IDX != + (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("StatAddr table size (%d) differs from " + "SK_PNMI_MAX_IDX (%d)\n", + (sizeof(StatAddr) / + (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)), + SK_PNMI_MAX_IDX)); + BRK; + } +#endif /* SK_PNMI_CHECK */ + break; + + case SK_INIT_IO: + /* + * Reset MAC counters + */ + PortMax = pAC->GIni.GIMacsFound; + + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + + pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex); + } + + /* Initialize DSP variables for Vct() to 0xff => Never written! */ + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + pPrt = &pAC->GIni.GP[PortIndex]; + pPrt->PCableLen =0xff; + pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex]; + pVctBackupData->PCableLen = 0xff; + } + + /* + * Get pci bus speed + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_CLOCK) == 0) { + + pAC->Pnmi.PciBusSpeed = 33; + } + else { + pAC->Pnmi.PciBusSpeed = 66; + } + + /* + * Get pci bus width + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_SLOT_SZ) == 0) { + + pAC->Pnmi.PciBusWidth = 32; + } + else { + pAC->Pnmi.PciBusWidth = 64; + } + + /* + * Get chipset + */ + switch (pAC->GIni.GIChipId) { + case CHIP_ID_GENESIS: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC; + break; + + case CHIP_ID_YUKON: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON; + break; + + default: + break; + } + + /* + * Get PMD and DeviceType + */ + SK_IN8(IoC, B2_PMD_TYP, &Val8); + switch (Val8) { + case 'S': + pAC->Pnmi.PMD = 3; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020002; + } + else { + pAC->Pnmi.DeviceType = 0x00020001; + } + break; + + case 'L': + pAC->Pnmi.PMD = 2; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020004; + } + else { + pAC->Pnmi.DeviceType = 0x00020003; + } + break; + + case 'C': + pAC->Pnmi.PMD = 4; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020006; + } + else { + pAC->Pnmi.DeviceType = 0x00020005; + } + break; + + case 'T': + pAC->Pnmi.PMD = 5; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020008; + } + else { + pAC->Pnmi.DeviceType = 0x00020007; + } + break; + + default : + pAC->Pnmi.PMD = 1; + pAC->Pnmi.DeviceType = 0; + break; + } + + /* + * Get connector + */ + SK_IN8(IoC, B2_CONN_TYP, &Val8); + switch (Val8) { + case 'C': + pAC->Pnmi.Connector = 2; + break; + + case 'D': + pAC->Pnmi.Connector = 3; + break; + + case 'F': + pAC->Pnmi.Connector = 4; + break; + + case 'J': + pAC->Pnmi.Connector = 5; + break; + + case 'V': + pAC->Pnmi.Connector = 6; + break; + + default: + pAC->Pnmi.Connector = 1; + break; + } + break; + + case SK_INIT_RUN: + /* + * Start timer for RLMT change counter + */ + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + default: + break; /* Nothing todo */ + } + + return (0); +} + +/***************************************************************************** + * + * SkPnmiGetVar - Retrieves the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. If the instance + * -1 is passed, the values of all instances are returned in an + * array of values. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiGetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiPreSetVar - Presets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is usefull to check if a set might be successfull. + * If as instance a -1 is passed, an array of values is supposed and + * all instance of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiPreSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer which stores the mgmt data to be set */ +unsigned int *pLen, /* Total length of mgmt data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + + return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetVar - Sets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is usefull to check if a set might be successfull. + * If as instance a -1 is passed, an array of values is supposed and + * all instance of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer which stores the mgmt data to be set */ +unsigned int *pLen, /* Total length of mgmt data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Runs through the IdTable, queries the single OIDs and stores the + * returned data into the management database structure + * SK_PNMI_STRUCT_DATA. The offset of the OID in the structure + * is stored in the IdTable. The return value of the function will also + * be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +int SkPnmiGetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which will store the retrieved data */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + unsigned int TmpLen; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Check NetIndex + */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + /* Update statistic */ + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call"); + + if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) != + SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + /* + * Increment semaphores to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Get vpd keys for instance calculation */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen); + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + + /* Retrieve values */ + SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE); + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + InstanceNo = IdTable[TableIndex].InstanceNo; + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * For the VPD the instance is not an index number + * but the key itself. Determin with the instance + * counter the VPD key to be used. + */ + if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY || + IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) { + + SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4); + } + else { + Instance = (SK_U32)InstanceCnt; + } + + TmpLen = *pLen - DstOffset; + Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET, + IdTable[TableIndex].Id, (char *)pBuf + + DstOffset, &TmpLen, Instance, TableIndex, NetIndex); + + /* + * An unknown instance error means that we reached + * the last instance of that variable. Proceed with + * the next OID in the table and ignore the return + * code. + */ + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + } + } + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + *pLen = SK_PNMI_STRUCT_SIZE; + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is usefull to check if a set might be successfull. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * preset. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiPreSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The return value + * of the function will also be stored in SK_PNMI_STRUCT_DATA if the + * passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * set. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiEvent - Event handler + * + * Description: + * Handles the following events: + * SK_PNMI_EVT_SIRQ_OVERFLOW When a hardware counter overflows an + * interrupt will be generated which is + * first handled by SIRQ which generates a + * this event. The event increments the + * upper 32 bit of the 64 bit counter. + * SK_PNMI_EVT_SEN_XXX The event is generated by the I2C module + * when a sensor reports a warning or + * error. The event will store a trap + * message in the trap buffer. + * SK_PNMI_EVT_CHG_EST_TIMER The timer event was initiated by this + * module and is used to calculate the + * port switches per hour. + * SK_PNMI_EVT_CLEAR_COUNTER The event clears all counters and + * timestamps. + * SK_PNMI_EVT_XMAC_RESET The event is generated by the driver + * before a hard reset of the XMAC is + * performed. All counters will be saved + * and added to the hardware counter + * values after reset to grant continuous + * counter values. + * SK_PNMI_EVT_RLMT_PORT_UP Generated by RLMT to notify that a port + * went logically up. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_PORT_DOWN Generated by RLMT to notify that a port + * went logically down. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two + * spanning tree root bridges were + * detected. A trap message will be stored + * to the trap buffer. + * SK_PNMI_EVT_RLMT_ACTIVE_DOWN Notifies PNMI that an active port went + * down. PNMI will not further add the + * statistic values to the virtual port. + * SK_PNMI_EVT_RLMT_ACTIVE_UP Notifies PNMI that a port went up and + * is now an active port. PNMI will now + * add the statistic data of this port to + * the virtual port. + * SK_PNMI_EVT_RLMT_SET_NETS Notifies PNMI about the net mode. The first Parameter + * contains the number of nets. 1 means single net, 2 means + * dual net. The second Parameter is -1 + * + * Returns: + * Always 0 + */ +int SkPnmiEvent( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Event, /* Event-Id */ +SK_EVPARA Param) /* Event dependent parameter */ +{ + unsigned int PhysPortIndex; + unsigned int MaxNetNumber; + int CounterIndex; + int Ret; + SK_U16 MacStatus; + SK_U64 OverflowStatus; + SK_U64 Mask; + int MacType; + SK_U64 Value; + SK_U32 Val32; + SK_U16 Register; + SK_EVPARA EventParam; + SK_U64 NewestValue; + SK_U64 OldestValue; + SK_U64 Delta; + SK_PNMI_ESTIMATE *pEst; + SK_U32 NetIndex; + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 RetCode; + int i; + SK_U32 CableLength; + + +#ifdef DEBUG + if (Event != SK_PNMI_EVT_XMAC_RESET) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n", + (unsigned int)Event, (unsigned int)Param.Para64)); + } +#endif + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call"); + + MacType = pAC->GIni.GIMacType; + + switch (Event) { + + case SK_PNMI_EVT_SIRQ_OVERFLOW: + PhysPortIndex = (int)Param.Para32[0]; + MacStatus = (SK_U16)Param.Para32[1]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter" + " wrong, PhysPortIndex=0x%x\n", + PhysPortIndex)); + return (0); + } +#endif + OverflowStatus = 0; + + /* + * Check which source caused an overflow interrupt. + */ + if ((pAC->GIni.GIFunc.pFnMacOverflow( + pAC, IoC, PhysPortIndex, MacStatus, &OverflowStatus) != 0) || + (OverflowStatus == 0)) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + + /* + * Check the overflow status register and increment + * the upper dword of corresponding counter. + */ + for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8; + CounterIndex ++) { + + Mask = (SK_U64)1 << CounterIndex; + if ((OverflowStatus & Mask) == 0) { + + continue; + } + + switch (StatOvrflwBit[CounterIndex][MacType]) { + + case SK_PNMI_HTX_UTILUNDER: + case SK_PNMI_HTX_UTILOVER: + XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, + &Register); + Register |= XM_TX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, + Register); + break; + + case SK_PNMI_HRX_UTILUNDER: + case SK_PNMI_HRX_UTILOVER: + XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, + &Register); + Register |= XM_RX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, + Register); + break; + + case SK_PNMI_HTX_OCTETHIGH: + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HTX_RESERVED: + case SK_PNMI_HRX_OCTETHIGH: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_RESERVED: + + /* + * the following counters aren't be handled (id > 63) + */ + case SK_PNMI_HTX_SYNC: + case SK_PNMI_HTX_SYNC_OCTET: + break; + + case SK_PNMI_HRX_LONGFRAMES: + if (MacType == SK_MAC_GMAC) { + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + break; + + default: + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + } + break; + + case SK_PNMI_EVT_SEN_WAR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_WAR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR:SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_CHG_EST_TIMER: + /* + * Calculate port switch average on a per hour basis + * Time interval for check : 28125 ms + * Number of values for average : 8 + * + * Be careful in changing these values, on change check + * - typedef of SK_PNMI_ESTIMATE (Size of EstValue + * array one less than value number) + * - Timer initilization SkTimerStart() in SkPnmiInit + * - Delta value below must be multiplicated with + * power of 2 + * + */ + pEst = &pAC->Pnmi.RlmtChangeEstimate; + CounterIndex = pEst->EstValueIndex + 1; + if (CounterIndex == 7) { + + CounterIndex = 0; + } + pEst->EstValueIndex = CounterIndex; + + NewestValue = pAC->Pnmi.RlmtChangeCts; + OldestValue = pEst->EstValue[CounterIndex]; + pEst->EstValue[CounterIndex] = NewestValue; + + /* + * Calculate average. Delta stores the number of + * port switches per 28125 * 8 = 225000 ms + */ + if (NewestValue >= OldestValue) { + + Delta = NewestValue - OldestValue; + } + else { + /* Overflow situation */ + Delta = (SK_U64)(0 - OldestValue) + NewestValue; + } + + /* + * Extrapolate delta to port switches per hour. + * Estimate = Delta * (3600000 / 225000) + * = Delta * 16 + * = Delta << 4 + */ + pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4; + + /* + * Check if threshold is exceeded. If the threshold is + * permanently exceeded every 28125 ms an event will be + * generated to remind the user of this condition. + */ + if ((pAC->Pnmi.RlmtChangeThreshold != 0) && + (pAC->Pnmi.RlmtChangeEstimate.Estimate >= + pAC->Pnmi.RlmtChangeThreshold)) { + + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + } + + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + case SK_PNMI_EVT_CLEAR_COUNTER: + /* + * Param.Para32[0] contains the NetIndex (0 ..1). + * Param.Para32[1] is reserved, contains -1. + */ + NetIndex = (SK_U32)Param.Para32[0]; + +#ifdef DEBUG + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n", + NetIndex)); + + return (0); + } +#endif + + /* + * Set all counters and timestamps to zero + */ + ResetCounter(pAC, IoC, NetIndex); /* the according NetIndex is required + as a Parameter of the Event */ + break; + + case SK_PNMI_EVT_XMAC_RESET: + /* + * To grant continuous counter values store the current + * XMAC statistic values to the entries 1..n of the + * CounterOffset array. XMAC Errata #2 + */ +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + PhysPortIndex = (unsigned int)Param.Para64; + + /* + * Update XMAC statistic to get fresh values + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + /* + * Increment semaphore to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + pAC->Pnmi.Port[PhysPortIndex]. + CounterOffset[CounterIndex] = GetPhysStatVal( + pAC, IoC, PhysPortIndex, CounterIndex); + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] = 0; + } + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_PORT_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix for XMAC errata (#10620)*/ + if (pAC->GIni.GIMacType == SK_MAC_XMAC){ + + /* Add incremental difference to offset (#10620)*/ + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + + Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] += + Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark; + } + + /* Tell VctStatus() that a link was up meanwhile. */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; + break; + + case SK_PNMI_EVT_RLMT_PORT_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix #10620 - get zero level for incremental difference */ + if ((pAC->GIni.GIMacType == SK_MAC_XMAC)) { + + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = + (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + } + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already inactive + */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was already + * done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. The virtual port consists of all currently + * active ports. The port down event indicates that a port is removed + * from the virtual port. Therefore add the counter value of the removed + * port to the CounterOffset for the virtual port to grant the same + * counter value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value; + } + + /* + * Set port to inactive + */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already active + */ + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Statistic maintenance + */ + pAC->Pnmi.RlmtChangeCts ++; + pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtNewMacTrap(pAC, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was + * already done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. A new port is added to the virtual port. + * Therefore substract the counter value of the new port from the + * CounterOffset for the virtual port to grant the same value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value; + } + + /* + * Set port to active + */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_SEGMENTATION: + /* + * Para.Para32[0] contains the NetIndex. + */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_RLMT_SET_NETS: + /* + * Param.Para32[0] contains the number of Nets. + * Param.Para32[1] is reserved, contains -1. + */ + /* + * Check number of nets + */ + MaxNetNumber = pAC->GIni.GIMacsFound; + if (((unsigned int)Param.Para32[0] < 1) + || ((unsigned int)Param.Para32[0] > MaxNetNumber)) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + else { /* dual net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_TRUE; + } + break; + + case SK_PNMI_EVT_VCT_RESET: + PhysPortIndex = Param.Para32[0]; + pPrt = &pAC->GIni.GP[PhysPortIndex]; + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { + /* + * VCT test is still running. + * Start VCT timer counter again. + */ + SK_MEMSET((char *) &Param, 0, sizeof(Param)); + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param); + break; + } + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairLen[i] > 35) { + CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param); + SkEventDispatcher(pAC, IoC); + } + + break; + + default: + break; + } + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); +} + + +/****************************************************************************** + * + * Private functions + * + */ + +/***************************************************************************** + * + * PnmiVar - Gets, presets, and sets single OIDs + * + * Description: + * Looks up the requested OID, calls the corresponding handler + * function, and passes the parameters with the get, preset, or + * set command. The function is called by SkGePnmiGetVar, + * SkGePnmiPreSetVar, or SkGePnmiSetVar. + * + * Returns: + * SK_PNMI_ERR_XXX. For details have a look to the description of the + * calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer which stores the mgmt data to be set */ +unsigned int *pLen, /* Total length of mgmt data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int TableIndex; + int Ret; + + + if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_OID); + } + + /* + * Check NetIndex + */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiVar: On call"); + + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen, + Instance, TableIndex, NetIndex); + + SK_PNMI_CHECKFLAGS("PnmiVar: On return"); + + return (Ret); +} + +/***************************************************************************** + * + * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA + * + * Description: + * The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable, + * checks which OIDs are able to set, and calls the handler function of + * the OID to perform the set. The return value of the function will + * also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called + * by SkGePnmiPreSetStruct and SkGePnmiSetStruct. + * + * Returns: + * SK_PNMI_ERR_XXX. The codes are described in the calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Set action to be performed */ +char *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int Len; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + SK_U32 Id; + + + /* Check if the passed buffer has the right size */ + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + /* Check if we can return the error within the buffer */ + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Check NetIndex + */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiStruct: On call"); + + /* + * Update the values of RLMT and SIRQ and increment semaphores to + * indicate that an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Preset/Set values */ + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + if ((IdTable[TableIndex].Access != SK_PNMI_RW) && + (IdTable[TableIndex].Access != SK_PNMI_WO)) { + + continue; + } + + InstanceNo = IdTable[TableIndex].InstanceNo; + Id = IdTable[TableIndex].Id; + + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * Because VPD multiple instance variables are + * not setable we do not need to evaluate VPD + * instances. Have a look to VPD instance + * calculation in SkPnmiGetStruct(). + */ + Instance = (SK_U32)InstanceCnt; + + /* + * Evaluate needed buffer length + */ + Len = 0; + Ret = IdTable[TableIndex].Func(pAC, IoC, + SK_PNMI_GET, IdTable[TableIndex].Id, + NULL, &Len, Instance, TableIndex, NetIndex); + + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + if (Ret != SK_PNMI_ERR_TOO_SHORT) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, + SK_PNMI_ERR_GENERAL, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + if (Id == OID_SKGE_VPD_ACTION) { + + switch (*(pBuf + DstOffset)) { + + case SK_PNMI_VPD_CREATE: + Len = 3 + *(pBuf + DstOffset + 3); + break; + + case SK_PNMI_VPD_DELETE: + Len = 3; + break; + + default: + Len = 1; + break; + } + } + + /* Call the OID handler function */ + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, + IdTable[TableIndex].Id, pBuf + DstOffset, + &Len, Instance, TableIndex, NetIndex); + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE, + DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + } + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * LookupId - Lookup an OID in the IdTable + * + * Description: + * Scans the IdTable to find the table entry of an OID. + * + * Returns: + * The table index or -1 if not found. + */ +PNMI_STATIC int LookupId( +SK_U32 Id) /* Object identifier to be searched */ +{ + int i; + + for (i = 0; i < ID_TABLE_SIZE; i++) { + + if (IdTable[i].Id == Id) { + + return i; + } + } + + return (-1); +} + +/***************************************************************************** + * + * OidStruct - Handler of OID_SKGE_ALL_DATA + * + * Description: + * This OID performs a Get/Preset/SetStruct call and returns all data + * in a SK_PNMI_STRUCT_DATA structure. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int OidStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + if (Id != OID_SKGE_ALL_DATA) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003, + SK_PNMI_ERR003MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + switch (Action) { + + case SK_PNMI_GET: + return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_PRESET: + return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_SET: + return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); +} + +/***************************************************************************** + * + * Perform - OID handler of OID_SKGE_ACTION + * + * Description: + * None. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Perform( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + SK_U32 ActionOp; + + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Check if a get should be performed */ + if (Action == SK_PNMI_GET) { + + /* A get is easy. We always return the same value */ + ActionOp = (SK_U32)SK_PNMI_ACT_IDLE; + SK_PNMI_STORE_U32(pBuf, ActionOp); + *pLen = sizeof(SK_U32); + + return (SK_PNMI_ERR_OK); + } + + /* Continue with PRESET/SET action */ + if (*pLen > sizeof(SK_U32)) { + + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* Check if the command is a known one */ + SK_PNMI_READ_U32(pBuf, ActionOp); + if (*pLen > sizeof(SK_U32) || + (ActionOp != SK_PNMI_ACT_IDLE && + ActionOp != SK_PNMI_ACT_RESET && + ActionOp != SK_PNMI_ACT_SELFTEST && + ActionOp != SK_PNMI_ACT_RESETCNT)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + switch (ActionOp) { + + case SK_PNMI_ACT_IDLE: + /* Nothing to do */ + break; + + case SK_PNMI_ACT_RESET: + /* + * Perform a driver reset or something that comes near + * to this. + */ + Ret = SK_DRIVER_RESET(pAC, IoC); + if (Ret != 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005, + SK_PNMI_ERR005MSG); + + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_ACT_SELFTEST: + /* + * Perform a driver selftest or something similar to this. + * Currently this feature is not used and will probably + * implemented in another way. + */ + Ret = SK_DRIVER_SELFTEST(pAC, IoC); + pAC->Pnmi.TestResult = Ret; + break; + + case SK_PNMI_ACT_RESETCNT: + /* Set all counters and timestamps to zero */ + ResetCounter(pAC, IoC, NetIndex); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006, + SK_PNMI_ERR006MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX + * + * Description: + * Retrieves the statistic values of the virtual port (logical + * index 0). Only special OIDs of NDIS are handled which consist + * of a 32 bit instead of a 64 bit value. The OIDs are public + * because perhaps some other platform can use them too. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Mac8023Stat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + SK_U64 StatVal; + SK_U32 StatVal32; + SK_BOOL Is64BitReq = SK_FALSE; + + /* + * Only the active Mac is returned + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action type + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check length + */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + case OID_802_3_CURRENT_ADDRESS: + if (*pLen < sizeof(SK_MAC_ADDR)) { + + *pLen = sizeof(SK_MAC_ADDR); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* + * for compatibility, at least 32bit are required for oid + */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + } + + /* + * Update all statistics, because we retrieve virtual MAC, which + * consists of multiple physical statistics and increment semaphore + * to indicate that an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if ( Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Get value (MAC Index 0 identifies the virtual MAC) + */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + case OID_802_3_CURRENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + default: + StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex); + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + StatVal32 = (SK_U32)StatVal; + SK_PNMI_STORE_U32(pBuf, StatVal32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, StatVal); + *pLen = sizeof(SK_U64); + } + break; + } + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX + * + * Description: + * Retrieves the XMAC statistic data. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortMax; + unsigned int Limit; + unsigned int Offset; + int Ret; + SK_U64 StatVal; + + + /* + * Calculate instance if wished. MAC index 0 is the virtual + * MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check length + */ + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Update XMAC statistic and increment semaphore to indicate that + * an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_TX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_RX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ + case OID_SKGE_STAT_RX: + case OID_SKGE_STAT_TX: + switch (pAC->GIni.GIMacType) { + case SK_MAC_XMAC: + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + break; + + case SK_MAC_GMAC: + if (Id == OID_SKGE_STAT_TX) { + + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_UNICAST, NetIndex); + } + else { + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNDERSIZE, NetIndex); + } + break; + + default: + StatVal = 0; + break; + } + + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + break; + + default: + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + break; + } + + Offset += sizeof(SK_U64); + } + *pLen = Offset; + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR + * + * Description: + * Get/Presets/Sets the current and factory MAC address. The MAC + * address of the virtual port, which is reported to the OS, may + * not be changed, but the physical ones. A set to the virtual port + * will be ignored. No error should be reported because otherwise + * a multiple instance set (-1) would always fail. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Addr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + unsigned int LogPortMax; + unsigned int PhysPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset = 0; + + /* + * Calculate instance if wished. MAC index 0 is the virtual + * MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform Action + */ + if (Action == SK_PNMI_GET) { + + /* + * Check length + */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_PHYS_CUR_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].CurrentMacAddress); + } + Offset += 6; + break; + + case OID_SKGE_PHYS_FAC_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, + &pAC->Addr.Net[NetIndex].PermanentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].PermanentMacAddress); + } + Offset += 6; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008, + SK_PNMI_ERR008MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + *pLen = Offset; + } + else { + /* + * The logical MAC address may not be changed only + * the physical ones + */ + if (Id == OID_SKGE_PHYS_FAC_ADDR) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Only the current address may be changed + */ + if (Id != OID_SKGE_PHYS_CUR_ADDR) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009, + SK_PNMI_ERR009MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Check length + */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > (Limit - LogPortIndex) * 6) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* + * Check Action + */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Set OID_SKGE_MAC_CUR_ADDR + */ + for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) { + + /* + * A set to virtual port and set of broadcast + * address will be ignored + */ + if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset, + "\xff\xff\xff\xff\xff\xff", 6) == 0) { + + continue; + } + + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, + LogPortIndex); + + Ret = SkAddrOverride(pAC, IoC, PhysPortIndex, + (SK_MAC_ADDR *)(pBuf + Offset), + (LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS : + SK_ADDR_PHYSICAL_ADDRESS)); + if (Ret != SK_ADDR_OVERRIDE_SUCCESS) { + + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX + * + * Description: + * Retrieves the statistic values of the CSUM module. The CSUM data + * structure must be available in the SK_AC even if the CSUM module + * is not included, because PNMI reads the statistic data from the + * CSUM part of SK_AC directly. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int CsumStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset = 0; + SK_U64 StatVal; + + + /* + * Calculate instance if wished + */ + if (Instance != (SK_U32)(-1)) { + + if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + Index = (unsigned int)Instance - 1; + Limit = Index + 1; + } + else { + Index = 0; + Limit = SKCS_NUM_PROTOCOLS; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check length + */ + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_CHKSM_RX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts; + break; + + case OID_SKGE_CHKSM_RX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts; + break; + + case OID_SKGE_CHKSM_RX_ERR_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts; + break; + + case OID_SKGE_CHKSM_TX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts; + break; + + case OID_SKGE_CHKSM_TX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010, + SK_PNMI_ERR010MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + Offset += sizeof(SK_U64); + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX + * + * Description: + * Retrieves the statistic values of the I2C module, which handles + * the temperature and voltage sensors. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int SensorStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int i; + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Len; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Calculate instance if wished + */ + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance -1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = (unsigned int) pAC->I2c.MaxSens; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check length + */ + switch (Id) { + + case OID_SKGE_SENSOR_VALUE: + case OID_SKGE_SENSOR_WAR_THRES_LOW: + case OID_SKGE_SENSOR_WAR_THRES_UPP: + case OID_SKGE_SENSOR_ERR_THRES_LOW: + case OID_SKGE_SENSOR_ERR_THRES_UPP: + if (*pLen < (Limit - Index) * sizeof(SK_U32)) { + + *pLen = (Limit - Index) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_DESCR: + for (Offset = 0, i = Index; i < Limit; i ++) { + + Len = (unsigned int) + SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1; + if (Len >= SK_PNMI_STRINGLEN2) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011, + SK_PNMI_ERR011MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Offset += Len; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_INDEX: + case OID_SKGE_SENSOR_TYPE: + case OID_SKGE_SENSOR_STATUS: + if (*pLen < Limit - Index) { + + *pLen = Limit - Index; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_WAR_CTS: + case OID_SKGE_SENSOR_WAR_TIME: + case OID_SKGE_SENSOR_ERR_CTS: + case OID_SKGE_SENSOR_ERR_TIME: + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012, + SK_PNMI_ERR012MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Get value + */ + for (Offset = 0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_SENSOR_INDEX: + *(pBuf + Offset) = (char)Index; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_DESCR: + Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc); + SK_MEMCPY(pBuf + Offset + 1, + pAC->I2c.SenTable[Index].SenDesc, Len); + *(pBuf + Offset) = (char)Len; + Offset += Len + 1; + break; + + case OID_SKGE_SENSOR_TYPE: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenType; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_VALUE: + Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_UPP: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreErrLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_UPP: + Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_STATUS: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenErrFlag; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_WAR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenWarnCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenErrCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_WAR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegWarnTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegErrTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("SensorStat: Unknown OID should be handled before")); + + return (SK_PNMI_ERR_GENERAL); + } + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Vpd - OID handler function of OID_SKGE_VPD_XXX + * + * Description: + * Get/preset/set of VPD data. As instance the name of a VPD key + * can be passed. The Instance parameter is a SK_U32 and can be + * used as a string buffer for the VPD key, because their maximum + * length is 4 byte. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Vpd( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_VPD_STATUS *pVpdStatus; + unsigned int BufLen; + char Buf[256]; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + char KeyStr[SK_PNMI_VPD_KEY_SIZE]; + unsigned int KeyNo; + unsigned int Offset; + unsigned int Index; + unsigned int FirstIndex; + unsigned int LastIndex; + unsigned int Len; + int Ret; + SK_U32 Val32; + + /* + * Get array of all currently stored VPD keys + */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), + &KeyNo); + if (Ret != SK_PNMI_ERR_OK) { + *pLen = 0; + return (Ret); + } + + /* + * If instance is not -1, try to find the requested VPD key for + * the multiple instance variables. The other OIDs as for example + * OID VPD_ACTION are single instance variables and must be + * handled separatly. + */ + FirstIndex = 0; + LastIndex = KeyNo; + + if ((Instance != (SK_U32)(-1))) { + + if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + SK_STRNCPY(KeyStr, (char *)&Instance, 4); + KeyStr[4] = 0; + + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + FirstIndex = Index; + LastIndex = Index+1; + break; + } + } + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + else if (Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + + /* + * Get value, if a query should be performed + */ + if (Action == SK_PNMI_GET) { + + switch (Id) { + + case OID_SKGE_VPD_FREE_BYTES: + /* Check length of buffer */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Get number of free bytes */ + pVpdStatus = VpdStat(pAC, IoC); + if (pVpdStatus == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017, + SK_PNMI_ERR017MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if ((pVpdStatus->vpd_status & VPD_VALID) == 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018, + SK_PNMI_ERR018MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Val32 = (SK_U32)pVpdStatus->vpd_free_rw; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_ENTRIES_LIST: + /* Check length */ + for (Len = 0, Index = 0; Index < KeyNo; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Get value */ + *(pBuf) = (char)Len - 1; + for (Offset = 1, Index = 0; Index < KeyNo; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len); + + Offset += Len; + + if (Index < KeyNo - 1) { + + *(pBuf + Offset) = ' '; + Offset ++; + } + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ENTRIES_NUMBER: + /* Check length */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Val32 = (SK_U32)KeyNo; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_KEY: + /* Check buffer length, if it is large enough */ + for (Len = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the key to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + + *(pBuf + Offset) = (char)Len; + SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index], + Len); + Offset += Len + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_VALUE: + /* Check the buffer length if it is large enough */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR021, + SK_PNMI_ERR021MSG); + + return (SK_PNMI_ERR_GENERAL); + } + Offset += BufLen + 1; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the value to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR022, + SK_PNMI_ERR022MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + *(pBuf + Offset) = (char)BufLen; + SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen); + Offset += BufLen + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACCESS: + if (*pLen < LastIndex - FirstIndex) { + + *pLen = LastIndex - FirstIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + if (VpdMayWrite(KeyArr[Index])) { + + *(pBuf + Offset) = SK_PNMI_VPD_RW; + } + else { + *(pBuf + Offset) = SK_PNMI_VPD_RO; + } + Offset ++; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACTION: + Offset = LastIndex - FirstIndex; + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + SK_MEMSET(pBuf, 0, Offset); + *pLen = Offset; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023, + SK_PNMI_ERR023MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + else { + /* The only OID which can be set is VPD_ACTION */ + if (Id != OID_SKGE_VPD_ACTION) { + + if (Id == OID_SKGE_VPD_FREE_BYTES || + Id == OID_SKGE_VPD_ENTRIES_LIST || + Id == OID_SKGE_VPD_ENTRIES_NUMBER || + Id == OID_SKGE_VPD_KEY || + Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024, + SK_PNMI_ERR024MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * From this point we handle VPD_ACTION. Check the buffer + * length. It should at least have the size of one byte. + */ + if (*pLen < 1) { + + *pLen = 1; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * The first byte contains the VPD action type we should + * perform. + */ + switch (*pBuf) { + + case SK_PNMI_VPD_IGNORE: + /* Nothing to do */ + break; + + case SK_PNMI_VPD_CREATE: + /* + * We have to create a new VPD entry or we modify + * an existing one. Check first the buffer length. + */ + if (*pLen < 4) { + + *pLen = 4; + return (SK_PNMI_ERR_TOO_SHORT); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* + * Is the entry writable or does it belong to the + * read-only area? + */ + if (!VpdMayWrite(KeyStr)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + Offset = (int)pBuf[3] & 0xFF; + + SK_MEMCPY(Buf, pBuf + 4, Offset); + Buf[Offset] = 0; + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Write the new entry or modify an existing one */ + Ret = VpdWrite(pAC, IoC, KeyStr, Buf); + if (Ret == SK_PNMI_VPD_NOWRITE ) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + else if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025, + SK_PNMI_ERR025MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026, + SK_PNMI_ERR026MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_VPD_DELETE: + /* Check if the buffer size is plausible */ + if (*pLen < 3) { + + *pLen = 3; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > 3) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* Find the passed key in the array */ + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + + break; + } + } + /* + * If we cannot find the key it is wrong, so we + * return an appropriate error value. + */ + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Ok, you wanted it and you will get it */ + Ret = VpdDelete(pAC, IoC, KeyStr); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027, + SK_PNMI_ERR027MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028, + SK_PNMI_ERR028MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * General - OID handler function of various single instance OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int General( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + unsigned int Index; + unsigned int Len; + unsigned int Offset; + unsigned int Val; + SK_U8 Val8; + SK_U16 Val16; + SK_U32 Val32; + SK_U64 Val64; + SK_U64 Val64RxHwErrs = 0; + SK_U64 Val64TxHwErrs = 0; + SK_BOOL Is64BitReq = SK_FALSE; + char Buf[256]; + int MacType; + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action. We only allow get requests. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + MacType = pAC->GIni.GIMacType; + + /* + * Check length for the various supported OIDs + */ + switch (Id) { + + case OID_GEN_XMIT_ERROR: + case OID_GEN_RCV_ERROR: + case OID_GEN_RCV_NO_BUFFER: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* + * for compatibility, at least 32bit are required for oid + */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + + case OID_SKGE_PORT_NUMBER: + case OID_SKGE_DEVICE_TYPE: + case OID_SKGE_RESULT: + case OID_SKGE_RLMT_MONITOR_NUMBER: + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + case OID_SKGE_TRAP_NUMBER: + case OID_SKGE_MDB_VERSION: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_CHIPSET: + if (*pLen < sizeof(SK_U16)) { + + *pLen = sizeof(SK_U16); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_BUS_TYPE: + case OID_SKGE_BUS_SPEED: + case OID_SKGE_BUS_WIDTH: + case OID_SKGE_SENSOR_NUMBER: + case OID_SKGE_CHKSM_NUMBER: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + case OID_SKGE_TX_SW_QUEUE_MAX: + case OID_SKGE_TX_RETRY: + case OID_SKGE_RX_INTR_CTS: + case OID_SKGE_TX_INTR_CTS: + case OID_SKGE_RX_NO_BUF_CTS: + case OID_SKGE_TX_NO_BUF_CTS: + case OID_SKGE_TX_USED_DESCR_NO: + case OID_SKGE_RX_DELIVERED_CTS: + case OID_SKGE_RX_OCTETS_DELIV_CTS: + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_SKGE_ERR_RECOVERY_CTS: + case OID_SKGE_SYSUPTIME: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + /* Checked later */ + break; + } + + /* Update statistic */ + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + /* Force the XMAC to update its statistic counters and + * Increment semaphore to indicate that an update was + * already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Some OIDs consist of multiple hardware counters. Those + * values which are contained in all of them will be added + * now. + */ + switch (Id) { + + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_GEN_RCV_ERROR: + Val64RxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex)+ + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex)+ + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_GEN_XMIT_ERROR: + Val64TxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex)+ + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex)+ + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex); + break; + } + } + + /* + * Retrieve value + */ + switch (Id) { + + case OID_SKGE_SUPPORTED_LIST: + Len = ID_TABLE_SIZE * sizeof(SK_U32); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + for (Offset = 0, Index = 0; Offset < Len; + Offset += sizeof(SK_U32), Index ++) { + + Val32 = (SK_U32)IdTable[Index].Id; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + } + *pLen = Len; + break; + + case OID_SKGE_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DEVICE_TYPE: + Val32 = (SK_U32)pAC->Pnmi.DeviceType; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DRIVER_DESCR: + if (pAC->Pnmi.pDriverDescription == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007, + SK_PNMI_ERR007MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029, + SK_PNMI_ERR029MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_VERSION: + if (pAC->Pnmi.pDriverVersion == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR030MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR031MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_DESCR: + /* + * The hardware description is located in the VPD. This + * query may move to the initialisation routine. But + * the VPD data is cached and therefore a call here + * will not make much difference. + */ + Len = 256; + if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032, + SK_PNMI_ERR032MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Len ++; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033, + SK_PNMI_ERR033MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, Buf, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_VERSION: + /* Oh, I love to do some string manipulation */ + if (*pLen < 5) { + + *pLen = 5; + return (SK_PNMI_ERR_TOO_SHORT); + } + Val8 = (SK_U8)pAC->GIni.GIPciHwRev; + pBuf[0] = 4; + pBuf[1] = 'v'; + pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F)); + pBuf[3] = '.'; + pBuf[4] = (char)(0x30 | (Val8 & 0x0F)); + *pLen = 5; + break; + + case OID_SKGE_CHIPSET: + Val16 = pAC->Pnmi.Chipset; + SK_PNMI_STORE_U16(pBuf, Val16); + *pLen = sizeof(SK_U16); + break; + + case OID_SKGE_BUS_TYPE: + *pBuf = (char)SK_PNMI_BUS_PCI; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_SPEED: + *pBuf = pAC->Pnmi.PciBusSpeed; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_WIDTH: + *pBuf = pAC->Pnmi.PciBusWidth; + *pLen = sizeof(char); + break; + + case OID_SKGE_RESULT: + Val32 = pAC->Pnmi.TestResult; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_NUMBER: + *pBuf = (char)pAC->I2c.MaxSens; + *pLen = sizeof(char); + break; + + case OID_SKGE_CHKSM_NUMBER: + *pBuf = SKCS_NUM_PROTOCOLS; + *pLen = sizeof(char); + break; + + case OID_SKGE_TRAP_NUMBER: + GetTrapQueueLen(pAC, &Len, &Val); + Val32 = (SK_U32)Val; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TRAP: + GetTrapQueueLen(pAC, &Len, &Val); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + CopyTrapQueue(pAC, pBuf); + *pLen = Len; + break; + + case OID_SKGE_RLMT_MONITOR_NUMBER: +/* XXX Not yet implemented by RLMT therefore we return zero elements */ + Val32 = 0; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen + + pAC->Pnmi.BufPort[1].TxSwQueueLen; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueLen + + pAC->Pnmi.Port[1].TxSwQueueLen; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + + case OID_SKGE_TX_SW_QUEUE_MAX: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax + + pAC->Pnmi.BufPort[1].TxSwQueueMax; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueMax + + pAC->Pnmi.Port[1].TxSwQueueMax; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_RETRY: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxRetryCts + + pAC->Pnmi.BufPort[1].TxRetryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxRetryCts + + pAC->Pnmi.Port[1].TxRetryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxIntrCts + + pAC->Pnmi.BufPort[1].RxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxIntrCts + + pAC->Pnmi.Port[1].RxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxIntrCts + + pAC->Pnmi.BufPort[1].TxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxIntrCts + + pAC->Pnmi.Port[1].TxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_USED_DESCR_NO: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo + + pAC->Pnmi.BufPort[1].TxUsedDescrNo; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo + + pAC->Pnmi.Port[1].TxUsedDescrNo; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_DELIVERED_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts + + pAC->Pnmi.BufPort[1].RxDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxDeliveredCts + + pAC->Pnmi.Port[1].RxDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_OCTETS_DELIV_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts + + pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts + + pAC->Pnmi.Port[1].RxOctetsDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_IN_ERRORS_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_OUT_ERROR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_ERR_RECOVERY_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts + + pAC->Pnmi.BufPort[1].ErrRecoveryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts + + pAC->Pnmi.Port[1].ErrRecoveryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_SYSUPTIME: + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + Val64 -= pAC->Pnmi.StartUpTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_MDB_VERSION: + Val32 = SK_PNMI_MDB_VERSION; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_GEN_RCV_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_XMIT_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + else { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_RCV_NO_BUFFER: + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034, + SK_PNMI_ERR034MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + pAC->Pnmi.MacUpdatedFlag --; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance. + * + * Description: + * Get/Presets/Sets the RLMT OIDs. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Rlmt( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + int Ret; + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_EVPARA EventParam; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Check instance. Only single instance OIDs are allowed here. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Perform the requested action + */ + if (Action == SK_PNMI_GET) { + + /* + * Check if the buffer length is large enough. + */ + + switch (Id) { + + case OID_SKGE_RLMT_MODE: + case OID_SKGE_RLMT_PORT_ACTIVE: + case OID_SKGE_RLMT_PORT_PREFERRED: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + case OID_SKGE_RLMT_CHANGE_TIME: + case OID_SKGE_RLMT_CHANGE_ESTIM: + case OID_SKGE_RLMT_CHANGE_THRES: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035, + SK_PNMI_ERR035MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update RLMT statistic and increment semaphores to indicate + * that an update was already done. Maybe RLMT will hold its + * statistic always up to date some time. Then we can + * remove this type of call. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Retrieve Value + */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + *pBuf = (char)pAC->Rlmt.Net[0].RlmtMode; + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_PORT_ACTIVE: + *pBuf = 0; + /* + * If multiple ports may become active this OID + * doesn't make sense any more. A new variable in + * the port structure should be created. However, + * for this variable the first active port is + * returned. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex); + break; + } + } + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference); + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + Val64 = pAC->Pnmi.RlmtChangeCts; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_TIME: + Val64 = pAC->Pnmi.RlmtChangeTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_ESTIM: + Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + Val64 = pAC->Pnmi.RlmtChangeThreshold; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("Rlmt: Unknown OID should be handled before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + pAC->Pnmi.RlmtUpdatedFlag --; + } + else { + /* Perform a preset or set */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || + (*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 || + *(SK_U8 *)pBuf > 15) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* Send an event to RLMT to change the mode */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] |= (SK_U32)(*pBuf); + EventParam.Para32[1] = 0; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037, + SK_PNMI_ERR037MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || *(SK_U8 *)pBuf > + (SK_U8)pAC->GIni.GIMacsFound) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Send an event to RLMT change the preferred port. + * A param of -1 means automatic mode. RLMT will + * make the decision which is the preferred port. + */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = (SK_U32)(*pBuf) - 1; + EventParam.Para32[1] = NetIndex; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038, + SK_PNMI_ERR038MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* + * There are not many restrictions to the + * value range. + */ + if (*pLen != sizeof(SK_U64)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* + * Store the new threshold, which will be taken + * on the next timer event. + */ + SK_PNMI_READ_U64(pBuf, Val64); + pAC->Pnmi.RlmtChangeThreshold = Val64; + break; + + default: + /* The other OIDs are not be able for set */ + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance. + * + * Description: + * Performs get requests on multiple instance variables. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int RlmtStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset; + int Ret; + SK_U32 Val32; + SK_U64 Val64; + + /* + * Calculate the port indexes from the instance + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + if ((Instance != (SK_U32)(-1))) { + /* Check instance range */ + if ((Instance < 1) || (Instance > PhysPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* Single net mode */ + PhysPortIndex = Instance - 1; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + + /* Both net modes */ + Limit = PhysPortIndex + 1; + } + else { + /* Single net mode */ + PhysPortIndex = 0; + Limit = PhysPortMax; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + Limit = PhysPortIndex + 1; + } + } + + /* + * Currently only get requests are allowed. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check if the buffer length is large enough. + */ + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + case OID_SKGE_RLMT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + case OID_SKGE_RLMT_RX_HELLO_CTS: + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + case OID_SKGE_RLMT_RX_SP_CTS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039, + SK_PNMI_ERR039MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Update statistic and increment semaphores to indicate that + * an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex ++) { + + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + Val32 = PhysPortIndex; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_STATUS: + if (pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_INIT || + pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_DOWN) { + + Val32 = SK_PNMI_RLMT_STATUS_ERROR; + } + else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val32 = SK_PNMI_RLMT_STATUS_ACTIVE; + } + else { + Val32 = SK_PNMI_RLMT_STATUS_STANDBY; + } + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_SP_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("RlmtStat: Unknown OID should be errored before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + + pAC->Pnmi.RlmtUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateConf - OID handler function of OIDs concerning the configuration + * + * Description: + * Get/Presets/Sets the OIDs concerning the configuration. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int Limit; + unsigned int Offset; + char Val8; + int Ret; + SK_EVPARA EventParam; + SK_U32 Val32; + + + /* + * Calculate instance if wished. MAC index 0 is the virtual + * MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* + * Check length + */ + switch (Id) { + + case OID_SKGE_PMD: + case OID_SKGE_CONNECTOR: + case OID_SKGE_LINK_CAP: + case OID_SKGE_LINK_MODE: + case OID_SKGE_LINK_MODE_STATUS: + case OID_SKGE_LINK_STATUS: + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_FLOWCTRL_STATUS: + case OID_SKGE_PHY_OPERATION_CAP: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_PHY_OPERATION_STATUS: + case OID_SKGE_SPEED_CAP: + case OID_SKGE_SPEED_MODE: + case OID_SKGE_SPEED_STATUS: + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) { + + *pLen = (Limit - LogPortIndex) * + sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_MTU: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041, + SK_PNMI_ERR041MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update statistic and increment semaphore to indicate + * that an update was already done. + */ + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.SirqUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_PMD: + *(pBuf + Offset) = pAC->Pnmi.PMD; + Offset += sizeof(char); + break; + + case OID_SKGE_CONNECTOR: + *(pBuf + Offset) = pAC->Pnmi.Connector; + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PLinkCap; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkCap; + Offset += sizeof(char); + } + break; + + case OID_SKGE_LINK_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PLinkModeConf; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkModeConf; + Offset += sizeof(char); + } + break; + + case OID_SKGE_LINK_MODE_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = + CalculateLinkModeStatus(pAC, + IoC, PhysPortIndex); + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + *(pBuf + Offset) = CalculateLinkModeStatus(pAC, IoC, NetIndex); + Offset += sizeof(char); + } + break; + + case OID_SKGE_LINK_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = + CalculateLinkStatus(pAC, + IoC, PhysPortIndex); + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = CalculateLinkStatus(pAC, IoC, NetIndex); + Offset += sizeof(char); + } + break; + + case OID_SKGE_FLOWCTRL_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PFlowCtrlCap; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlCap; + Offset += sizeof(char); + } + break; + + case OID_SKGE_FLOWCTRL_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PFlowCtrlMode; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlMode; + Offset += sizeof(char); + } + break; + + case OID_SKGE_FLOWCTRL_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PFlowCtrlStatus; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlStatus; + Offset += sizeof(char); + } + break; + + case OID_SKGE_PHY_OPERATION_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PMSCap; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSCap; + Offset += sizeof(char); + } + break; + + case OID_SKGE_PHY_OPERATION_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PMSMode; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSMode; + Offset += sizeof(char); + } + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PMSStatus; + } + Offset += sizeof(char); + } + else { + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSStatus; + Offset += sizeof(char); + } + break; + + case OID_SKGE_SPEED_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + + Offset); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PLinkSpeedCap; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeedCap; + Offset += sizeof(char); + } + break; + + case OID_SKGE_SPEED_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PLinkSpeed; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeed; + Offset += sizeof(char); + } + break; + + case OID_SKGE_SPEED_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBuf + Offset); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *(pBuf + Offset) = pAC->GIni.GP[ + PhysPortIndex].PLinkSpeedUsed; + } + Offset += sizeof(char); + } + else { /* DualNetMode */ + + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeedUsed; + Offset += sizeof(char); + } + break; + + case OID_SKGE_MTU: + Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex); + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before")); + + pAC->Pnmi.SirqUpdatedFlag --; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + pAC->Pnmi.SirqUpdatedFlag --; + + return (SK_PNMI_ERR_OK); + } + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + switch (Id) { + + case OID_SKGE_LINK_MODE: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_SPEED_MODE: + if (*pLen < Limit - LogPortIndex) { + + *pLen = Limit - LogPortIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != Limit - LogPortIndex) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + case OID_SKGE_MTU: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != sizeof(SK_U32)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Perform preset or set + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_LINK_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_LMODE_HALF || + (LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) || + (LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new link mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new link mode to + * the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_FLOW_MODE_NONE || + (LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) || + (LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, EventParam) + > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_MODE : + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + /* mode of this port remains unchanged */ + Offset += sizeof(char); + break; + } + if (Val8 < SK_MS_MODE_AUTO || + (LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) || + (LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with new master/slave (role) mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new master/slave + * (role) mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < (SK_LSPEED_AUTO) || + (LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) || + (LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_MTU : + /* Check the value range */ + Val32 = *(SK_U32*)(pBuf + Offset); + if (Val32 == 0) { + /* mtu of this port remains unchanged */ + Offset += sizeof(SK_U32); + break; + } + if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + return (SK_PNMI_ERR_GENERAL); + } + + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before set")); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Monitor - OID handler function for RLMT_MONITOR_XXX + * + * Description: + * Because RLMT currently does not support the monitoring of + * remote adapter cards, we return always an empty table. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Monitor( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Entries; + + + /* + * Calculate instance if wished. + */ +/* XXX Not yet implemented. Return always an empty table. */ + Entries = 0; + + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > Entries)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance - 1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = Entries; + } + + /* + * Get/Set value + */ + if (Action == SK_PNMI_GET) { + + for (Offset=0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_RLMT_MONITOR_INDEX: + case OID_SKGE_RLMT_MONITOR_ADDR: + case OID_SKGE_RLMT_MONITOR_ERRS: + case OID_SKGE_RLMT_MONITOR_TIMESTAMP: + case OID_SKGE_RLMT_MONITOR_ADMIN: + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046, + SK_PNMI_ERR046MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + else { + /* Only MONITOR_ADMIN can be set */ + if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check if the length is plausible */ + if (*pLen < (Limit - Index)) { + + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Okay, we have a wide value range */ + if (*pLen != (Limit - Index)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } +/* + for (Offset=0; Index < Limit; Index ++) { + } +*/ +/* + * XXX Not yet implemented. Return always BAD_VALUE, because the table + * is empty. + */ + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * VirtualConf - Calculates the values of configuration OIDs for virtual port + * + * Description: + * We handle here the get of the configuration group OIDs, which are + * a little bit complicated. The virtual port consists of all currently + * active physical ports. If multiple ports are active and configured + * differently we get in some trouble to return a single value. So we + * get the value of the first active port and compare it with that of + * the other active ports. If they are not the same, we return a value + * that indicates that the state is indeterminated. + * + * Returns: + * Nothing + */ +PNMI_STATIC void VirtualConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf) /* Buffer to which to mgmt data will be retrieved */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + SK_U8 Val8; + SK_BOOL PortActiveFlag; + + + *pBuf = 0; + PortActiveFlag = SK_FALSE; + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + /* Check if the physical port is active */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + PortActiveFlag = SK_TRUE; + + switch (Id) { + + case OID_SKGE_LINK_CAP: + + /* + * Different capabilities should not happen, but + * in the case of the cases OR them all together. + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pAC->GIni.GP[PhysPortIndex].PLinkCap; + break; + + case OID_SKGE_LINK_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkModeConf; + continue; + } + + /* + * If we find an active port with a different link + * mode than the first one we return a value that + * indicates that the link mode is indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkModeConf + ) { + + *pBuf = SK_LMODE_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_MODE_STATUS: + /* Get the link mode of the physical port */ + Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * mode status than the first one we return a value + * that indicates that the link mode status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_LMODE_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_STATUS: + /* Get the link status of the physical port */ + Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * status than the first one, we return a value + * that indicates that the link status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap; + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode) { + + *pBuf = SK_FLOW_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus) { + + *pBuf = SK_FLOW_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PMSCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pAC->GIni.GP[PhysPortIndex].PMSCap; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PMSMode; + continue; + } + + /* + * If we find an active port with a different master/ + * slave mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PMSMode) { + + *pBuf = SK_MS_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PMSStatus; + continue; + } + + /* + * If we find an active port with a different master/ + * slave status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PMSStatus) { + + *pBuf = SK_MS_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkSpeed; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkSpeed) { + + *pBuf = SK_LSPEED_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed) { + + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + } + break; + } + } + + /* + * If no port is active return an indeterminated answer + */ + if (!PortActiveFlag) { + + switch (Id) { + + case OID_SKGE_LINK_CAP: + *pBuf = SK_LMODE_CAP_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE: + *pBuf = SK_LMODE_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE_STATUS: + *pBuf = SK_LMODE_STAT_INDETERMINATED; + break; + + case OID_SKGE_LINK_STATUS: + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + *pBuf = SK_FLOW_MODE_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_STATUS: + *pBuf = SK_FLOW_STAT_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_CAP: + *pBuf = SK_MS_CAP_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + *pBuf = SK_MS_MODE_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + *pBuf = SK_MS_STAT_INDETERMINATED; + break; + case OID_SKGE_SPEED_CAP: + *pBuf = SK_LSPEED_CAP_INDETERMINATED; + break; + + case OID_SKGE_SPEED_MODE: + *pBuf = SK_LSPEED_INDETERMINATED; + break; + + case OID_SKGE_SPEED_STATUS: + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + break; + } + } +} + +/***************************************************************************** + * + * CalculateLinkStatus - Determins the link status of a physical port + * + * Description: + * Determins the link status the following way: + * LSTAT_PHY_DOWN: Link is down + * LSTAT_AUTONEG: Auto-negotiation failed + * LSTAT_LOG_DOWN: Link is up but RLMT did not yet put the port + * logically up. + * LSTAT_LOG_UP: RLMT marked the port as up + * + * Returns: + * Link status of physical port + */ +PNMI_STATIC SK_U8 CalculateLinkStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + + if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) { + + Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) { + + Result = SK_PNMI_RLMT_LSTAT_AUTONEG; + } + else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) { + + Result = SK_PNMI_RLMT_LSTAT_LOG_UP; + } + else { + Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN; + } + + return (Result); +} + +/***************************************************************************** + * + * CalculateLinkModeStatus - Determins the link mode status of a phys. port + * + * Description: + * The COMMON module only tells us if the mode is half or full duplex. + * But in the decade of auto sensing it is usefull for the user to + * know if the mode was negotiated or forced. Therefore we have a + * look to the mode, which was last used by the negotiation process. + * + * Returns: + * The link mode status + */ +PNMI_STATIC SK_U8 CalculateLinkModeStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + + /* Get the current mode, which can be full or half duplex */ + Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus; + + /* Check if no valid mode could be found (link is down) */ + if (Result < SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_UNKNOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) { + + /* + * Auto-negotiation was used to bring up the link. Change + * the already found duplex status that it indicates + * auto-negotiation was involved. + */ + if (Result == SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_AUTOHALF; + } + else if (Result == SK_LMODE_STAT_FULL) { + + Result = SK_LMODE_STAT_AUTOFULL; + } + } + + return (Result); +} + +/***************************************************************************** + * + * GetVpdKeyArr - Obtain an array of VPD keys + * + * Description: + * Read the VPD keys and build an array of VPD keys, which are + * easy to access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int GetVpdKeyArr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +char *pKeyArr, /* Ptr KeyArray */ +unsigned int KeyArrLen, /* Length of array in bytes */ +unsigned int *pKeyNo) /* Number of keys */ +{ + unsigned int BufKeysLen = SK_PNMI_VPD_BUFSIZE; + char BufKeys[SK_PNMI_VPD_BUFSIZE]; + unsigned int StartOffset; + unsigned int Offset; + int Index; + int Ret; + + + SK_MEMSET(pKeyArr, 0, KeyArrLen); + + /* + * Get VPD key list + */ + Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen, + (int *)pKeyNo); + if (Ret > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014, + SK_PNMI_ERR014MSG); + + return (SK_PNMI_ERR_GENERAL); + } + /* If no keys are available return now */ + if (*pKeyNo == 0 || BufKeysLen == 0) { + + return (SK_PNMI_ERR_OK); + } + /* + * If the key list is too long for us trunc it and give a + * errorlog notification. This case should not happen because + * the maximum number of keys is limited due to RAM limitations + */ + if (*pKeyNo > SK_PNMI_VPD_ENTRIES) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015, + SK_PNMI_ERR015MSG); + + *pKeyNo = SK_PNMI_VPD_ENTRIES; + } + + /* + * Now build an array of fixed string length size and copy + * the keys together. + */ + for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen; + Offset ++) { + + if (BufKeys[Offset] != 0) { + + continue; + } + + if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016, + SK_PNMI_ERR016MSG); + return (SK_PNMI_ERR_GENERAL); + } + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + + Index ++; + StartOffset = Offset + 1; + } + + /* Last key not zero terminated? Get it anyway */ + if (StartOffset < Offset) { + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SirqUpdate - Let the SIRQ update its internal values + * + * Description: + * Just to be sure that the SIRQ module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int SirqUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC) /* IO context handle */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.SirqUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047, + SK_PNMI_ERR047MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtUpdate - Let the RLMT update its internal values + * + * Description: + * Just to be sure that the RLMT module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int RlmtUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.RlmtUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048, + SK_PNMI_ERR048MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacUpdate - Force the XMAC to output the current statistic + * + * Description: + * The XMAC holds its statistic internally. To obtain the current + * values we send a command so that the statistic data will + * be written to apredefined memory area on the adapter. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int MacUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int FirstMac, /* Index of the first Mac to be updated */ +unsigned int LastMac) /* Index of the last Mac to be updated */ +{ + unsigned int MacIndex; + + /* + * Were the statistics already updated during the + * current PNMI call? + */ + if (pAC->Pnmi.MacUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an update command to all MACs specified */ + for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) { + + /* + * 2002-09-13 pweber: Freeze the current sw counters. + * (That should be done as close as + * possible to the update of the + * hw counters) + */ + if (pAC->GIni.GIMacType == SK_MAC_XMAC) { + pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex]; + } + + /* 2002-09-13 pweber: Update the hw counter */ + if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) { + + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * GetStatVal - Retrieve an XMAC statistic counter + * + * Description: + * Retrieves the statistic counter of a virtual or physical port. The + * virtual port is identified by the index 0. It consists of all + * currently active ports. To obtain the counter value for this port + * we must add the statistic counter of all active ports. To grant + * continuous counter values for the virtual port even when port + * switches occur we must additionally add a delta value, which was + * calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event. + * + * Returns: + * Requested statistic value + */ +PNMI_STATIC SK_U64 GetStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int LogPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex, /* Index to statistic value */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_U64 Val = 0; + + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + + PhysPortIndex = NetIndex; + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + else { /* Single Net mode */ + + if (LogPortIndex == 0) { + + PhysPortMax = pAC->GIni.GIMacsFound; + + /* Add counter of all active ports */ + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, + StatIndex); + } + } + + /* Correct value because of port switches */ + Val += pAC->Pnmi.VirtualCounterOffset[StatIndex]; + } + else { + /* Get counter value of physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + } + return (Val); +} + +/***************************************************************************** + * + * GetPhysStatVal - Get counter value for physical port + * + * Description: + * Builds a 64bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * in software by monitoring counter overflow interrupts in the + * event handler. To grant continous counter values during XMAC + * resets (caused by a workaround) we must add a delta value. + * The delta was calculated in the event handler when a + * SK_PNMI_EVT_XMAC_RESET was received. + * + * Returns: + * Counter value + */ +PNMI_STATIC SK_U64 GetPhysStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex) /* Index to statistic value */ +{ + SK_U64 Val = 0; + SK_U32 LowVal = 0; + SK_U32 HighVal = 0; + SK_U16 Word; + int MacType; + + SK_PNMI_PORT *pPnmiPrt; + SK_GEMACFUNC *pFnMac; + + MacType = pAC->GIni.GIMacType; + + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ + if (pAC->GIni.GIMacType == SK_MAC_XMAC) { + pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex]; + } + else { + pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex]; + } + + pFnMac = &pAC->GIni.GIFunc; + + switch (StatIndex) { + case SK_PNMI_HTX: + case SK_PNMI_HRX: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_OCTET: + case SK_PNMI_HRX_OCTET: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_BURST: + case SK_PNMI_HTX_EXCESS_DEF: + case SK_PNMI_HTX_CARRIER: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_MACC: + /* GMAC only supports PAUSE MAC control frames */ + if (MacType == SK_MAC_GMAC) { + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, SK_PNMI_HTX_PMACC); + + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_COL: + case SK_PNMI_HRX_UNDERSIZE: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + + case SK_PNMI_HTX_DEFFERAL: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + /* + * XMAC counts frames with deferred transmission + * even in full-duplex mode. + * + * In full-duplex mode the counter remains constant! + */ + if ((pAC->GIni.GP[PhysPortIndex].PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) || + (pAC->GIni.GP[PhysPortIndex].PLinkModeStatus == SK_LMODE_STAT_FULL)) { + + LowVal = 0; + HighVal = 0; + } + else { + /* Otherwise get contents of hardware register. */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_DEFFERAL][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + case SK_PNMI_HRX_BADOCTET: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_BADOCTETLOW: + return (Val); + + case SK_PNMI_HRX_LONGFRAMES: + /* For XMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_XMAC) { + return (pPnmiPrt->StatRxLongFrameCts); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_TOO_LONG: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + switch (MacType) { + case SK_MAC_GMAC: + /* For GMAC the SW counter is additionally managed by PNMI */ + Val += pPnmiPrt->StatRxFrameTooLongCts; + break; + + case SK_MAC_XMAC: + /* + * Frames longer than IEEE 802.3 frame max size are counted + * by XMAC in frame_too_long counter even reception of long + * frames was enabled and the frame was correct. + * So correct the value by subtracting RxLongFrame counter. + */ + Val -= pPnmiPrt->StatRxLongFrameCts; + break; + + default: + break; + } + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + break; + + case SK_PNMI_HRX_SHORTS: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + /* GM_RXE_FRAG?? */ + return (Val); + } + + /* + * XMAC counts short frame errors even if link down (#10620) + * + * If link-down the counter remains constant + */ + if (pAC->GIni.GP[PhysPortIndex].PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) { + + /* Otherwise get incremental difference */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + Val -= pPnmiPrt->RxShortZeroMark; + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + } + break; + + case SK_PNMI_HRX_MACC: + case SK_PNMI_HRX_MACC_UNKWN: + case SK_PNMI_HRX_BURST: + case SK_PNMI_HRX_MISSED: + case SK_PNMI_HRX_FRAMING: + case SK_PNMI_HRX_CARRIER: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_SYMBOL: + case SK_PNMI_HRX_CEXT: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + /* GM_RXE_FRAG?? */ + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_PMACC_ERR: + /* For GMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_GMAC) { + return (pPnmiPrt->StatRxPMaccErr); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC: + LowVal = (SK_U32)pPnmiPrt->StatSyncCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32); + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC_OCTET: + LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32); + break; + + case SK_PNMI_HRX_FCS: + /* + * Broadcom filters fcs errors and counts it in + * Receive Error Counter register + */ + if (pAC->GIni.GP[PhysPortIndex].PhyType == SK_PHY_BCOM) { + /* do not read while not initialized (PHY_READ hangs!)*/ + if (pAC->GIni.GP[PhysPortIndex].PState) { + PHY_READ(IoC, &pAC->GIni.GP[PhysPortIndex], + PhysPortIndex, PHY_BCOM_RE_CTR, + &Word); + + LowVal = Word; + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + default: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + } + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + /* Correct value because of possible XMAC reset. XMAC Errata #2 */ + Val += pPnmiPrt->CounterOffset[StatIndex]; + + return (Val); +} + +/***************************************************************************** + * + * ResetCounter - Set all counters and timestamps to zero + * + * Description: + * Notifies other common modules which store statistic data to + * reset their counters and finally reset our own counters. + * + * Returns: + * Nothing + */ +PNMI_STATIC void ResetCounter( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) +{ + unsigned int PhysPortIndex; + SK_EVPARA EventParam; + + + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + + /* Notify sensor module */ + SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam); + + /* Notify RLMT module */ + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam); + EventParam.Para32[1] = 0; + + /* Notify SIRQ module */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam); + + /* Notify CSUM module */ +#ifdef SK_USE_CSUM + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS, + EventParam); +#endif + + /* Clear XMAC statistic */ + for (PhysPortIndex = 0; PhysPortIndex < + (unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) { + + (void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex); + + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + CounterOffset, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].CounterOffset)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatSyncOctetsCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxLongFrameCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxFrameTooLongCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxPMaccErr)); + } + + /* + * Clear local statistics + */ + SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0, + sizeof(pAC->Pnmi.VirtualCounterOffset)); + pAC->Pnmi.RlmtChangeCts = 0; + pAC->Pnmi.RlmtChangeTime = 0; + SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0, + sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue)); + pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0; + pAC->Pnmi.RlmtChangeEstimate.Estimate = 0; + pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0; + pAC->Pnmi.Port[NetIndex].TxRetryCts = 0; + pAC->Pnmi.Port[NetIndex].RxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].TxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0; + pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0; +} + +/***************************************************************************** + * + * GetTrapEntry - Get an entry in the trap buffer + * + * Description: + * The trap buffer stores various events. A user application somehow + * gets notified that an event occured and retrieves the trap buffer + * contens (or simply polls the buffer). The buffer is organized as + * a ring which stores the newest traps at the beginning. The oldest + * traps are overwritten by the newest ones. Each trap entry has a + * unique number, so that applications may detect new trap entries. + * + * Returns: + * A pointer to the trap entry + */ +PNMI_STATIC char* GetTrapEntry( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* SNMP ID of the trap */ +unsigned int Size) /* Space needed for trap entry */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int BufFree = pAC->Pnmi.TrapBufFree; + unsigned int Beg = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + int Wrap; + unsigned int NeededSpace; + unsigned int EntrySize; + SK_U32 Val32; + SK_U64 Val64; + + + /* Last byte of entry will get a copy of the entry length */ + Size ++; + + /* + * Calculate needed buffer space */ + if (Beg >= Size) { + + NeededSpace = Size; + Wrap = SK_FALSE; + } + else { + NeededSpace = Beg + Size; + Wrap = SK_TRUE; + } + + /* + * Check if enough buffer space is provided. Otherwise + * free some entries. Leave one byte space between begin + * and end of buffer to make it possible to detect whether + * the buffer is full or empty + */ + while (BufFree < NeededSpace + 1) { + + if (End == 0) { + + End = SK_PNMI_TRAP_QUEUE_LEN; + } + + EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1); + BufFree += EntrySize; + End -= EntrySize; +#ifdef DEBUG + SK_MEMSET(pBuf + End, (char)(-1), EntrySize); +#endif + if (End == BufPad) { +#ifdef DEBUG + SK_MEMSET(pBuf, (char)(-1), End); +#endif + BufFree += End; + End = 0; + BufPad = 0; + } + } + + /* + * Insert new entry as first entry. Newest entries are + * stored at the beginning of the queue. + */ + if (Wrap) { + + BufPad = Beg; + Beg = SK_PNMI_TRAP_QUEUE_LEN - Size; + } + else { + Beg = Beg - Size; + } + BufFree -= NeededSpace; + + /* Save the current offsets */ + pAC->Pnmi.TrapQueueBeg = Beg; + pAC->Pnmi.TrapQueueEnd = End; + pAC->Pnmi.TrapBufPad = BufPad; + pAC->Pnmi.TrapBufFree = BufFree; + + /* Initialize the trap entry */ + *(pBuf + Beg + Size - 1) = (char)Size; + *(pBuf + Beg) = (char)Size; + Val32 = (pAC->Pnmi.TrapUnique) ++; + SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32); + SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId); + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64); + + return (pBuf + Beg); +} + +/***************************************************************************** + * + * CopyTrapQueue - Copies the trap buffer for the TRAP OID + * + * Description: + * On a query of the TRAP OID the trap buffer contents will be + * copied continuously to the request buffer, which must be large + * enough. No length check is performed. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyTrapQueue( +SK_AC *pAC, /* Pointer to adapter context */ +char *pDstBuf) /* Buffer to which the queued traps will be copied */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int DstOff = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + + /* + * Last byte containing a copy of the length will + * not be copied. + */ + *(pDstBuf + DstOff) = (char)(Len - 1); + SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2); + DstOff += Len - 1; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } +} + +/***************************************************************************** + * + * GetTrapQueueLen - Get the length of the trap buffer + * + * Description: + * Evaluates the number of currently stored traps and the needed + * buffer size to retrieve them. + * + * Returns: + * Nothing + */ +PNMI_STATIC void GetTrapQueueLen( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int *pLen, /* Length in Bytes of all queued traps */ +unsigned int *pEntries) /* Returns number of trapes stored in queue */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int Entries = 0; + unsigned int TotalLen = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + TotalLen += Len - 1; + Entries ++; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } + + *pEntries = Entries; + *pLen = TotalLen; +} + +/***************************************************************************** + * + * QueueSimpleTrap - Store a simple trap to the trap buffer + * + * Description: + * A simple trap is a trap with now additional data. It consists + * simply of a trap code. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSimpleTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId) /* Type of sensor trap */ +{ + GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN); +} + +/***************************************************************************** + * + * QueueSensorTrap - Stores a sensor trap in the trap buffer + * + * Description: + * Gets an entry in the trap buffer and fills it with sensor related + * data. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSensorTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of sensor trap */ +unsigned int SensorIndex) /* Index of sensor which caused the trap */ +{ + char *pBuf; + unsigned int Offset; + unsigned int DescrLen; + SK_U32 Val32; + + + /* Get trap buffer entry */ + DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc); + pBuf = GetTrapEntry(pAC, TrapId, + SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen); + Offset = SK_PNMI_TRAP_SIMPLE_LEN; + + /* Store additionally sensor trap related data */ + Val32 = OID_SKGE_SENSOR_INDEX; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)SensorIndex; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); + Offset += 9; + + Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = (char)DescrLen; + SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc, + DescrLen); + Offset += DescrLen + 5; + + Val32 = OID_SKGE_SENSOR_TYPE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 1; + *(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType; + Offset += 6; + + Val32 = OID_SKGE_SENSOR_VALUE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); +} + +/***************************************************************************** + * + * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtNewMacTrap( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int ActiveMac) /* Index (0..n) of the currently active port */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT, + SK_PNMI_TRAP_RLMT_CHANGE_LEN); + + Val32 = OID_SKGE_RLMT_PORT_ACTIVE; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac; +} + +/***************************************************************************** + * + * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtPortTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of RLMT port trap */ +unsigned int PortIndex) /* Index of the port, which changed its state */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN); + + Val32 = OID_SKGE_RLMT_PORT_INDEX; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex; +} + +/***************************************************************************** + * + * CopyMac - Copies a MAC address + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyMac( +char *pDst, /* Pointer to destination buffer */ +SK_MAC_ADDR *pMac) /* Pointer of Source */ +{ + int i; + + + for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) { + + *(pDst + i) = pMac->a[i]; + } +} + + +#ifdef SK_POWER_MGMT +/***************************************************************************** + * + * PowerManagement - OID handler function of PowerManagement OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ + +PNMI_STATIC int PowerManagement( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* + * Check length + */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + if (*pLen < sizeof(SK_PNP_CAPABILITIES)) { + + *pLen = sizeof(SK_PNP_CAPABILITIES); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_QUERY_POWER: + case OID_PNP_ENABLE_WAKE_UP: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_SET_POWER: + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, + SK_PNMI_ERR040MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Get value + */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_QUERY_POWER: + /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests + the miniport to indicate whether it can transition its NIC + to the low-power state. + A miniport driver must always return NDIS_STATUS_SUCCESS + to a query of OID_PNP_QUERY_POWER. */ + RetCode = SK_PNMI_ERR_OK; + break; + + /* NDIS handles these OIDs as write-only. + * So in case of get action the buffer with written length = 0 + * is returned + */ + case OID_PNP_SET_POWER: + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + *pLen = 0; + RetCode = SK_PNMI_ERR_OK; + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + break; + } + + return (RetCode); + } + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + switch (Id) { + case OID_PNP_SET_POWER: + case OID_PNP_ENABLE_WAKE_UP: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != sizeof(SK_U32)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Perform preset or set + */ + + /* POWER module does not support PRESET action */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + switch (Id) { + case OID_PNP_SET_POWER: + RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + } + + return (RetCode); +} +#endif /* SK_POWER_MGMT */ + + +/***************************************************************************** + * + * Vct - OID handler function of OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was performed successfully. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter). + * SK_PNMI_ERR_READ_ONLY Only the Get action is allowed. + * + */ + +PNMI_STATIC int Vct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which the mgmt data will be copied */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (-1,2..n) that is to be queried */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 LogPortMax; + SK_U32 PhysPortMax; + SK_U32 PhysPortIndex; + SK_U32 Limit; + SK_U32 Offset; + SK_BOOL Link; + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + int i; + SK_EVPARA Para; + SK_U32 CableLength; + + /* + * Calculate the port indexes from the instance. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + /* Dual net mode? */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + LogPortMax--; + } + + if ((Instance != (SK_U32) (-1))) { + /* Check instance range. */ + if ((Instance < 2) || (Instance > LogPortMax)) { + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + else { + PhysPortIndex = Instance - 2; + } + Limit = PhysPortIndex + 1; + } + else { /* + * Instance == (SK_U32) (-1), get all Instances of that OID. + * + * Not implemented yet. May be used in future releases. + */ + PhysPortIndex = 0; + Limit = PhysPortMax; + } + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + if (pPrt->PHWLinkUp) { + Link = SK_TRUE; + } + else { + Link = SK_FALSE; + } + + /* + * Check MAC type. + */ + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Initialize backup data pointer. */ + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + /* + * Check action type. + */ + if (Action == SK_PNMI_GET) { + /* + * Check length. + */ + switch (Id) { + + case OID_SKGE_VCT_GET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_VCT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Get value. + */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + + case OID_SKGE_VCT_GET: + if ((Link == SK_FALSE) && + (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 0) { + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) { + pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; + } + } + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) { + CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + SkEventDispatcher(pAC, IoC); + } + else { + ; /* VCT test is running. */ + } + } + + /* Get all results. */ + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + *(pBuf + Offset) = pPrt->PCableLen; + Offset += sizeof(SK_U8); + for (i = 0; i < 4; i++) { + SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]); + Offset += sizeof(SK_U32); + } + for (i = 0; i < 4; i++) { + *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i]; + Offset += sizeof(SK_U8); + } + + RetCode = SK_PNMI_ERR_OK; + break; + + case OID_SKGE_VCT_STATUS: + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + RetCode = SK_PNMI_ERR_OK; + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + + } /* if SK_PNMI_GET */ + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + + /* + * Check length. + */ + switch (Id) { + case OID_SKGE_VCT_SET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform preset or set. + */ + + /* VCT does not support PRESET action. */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + case OID_SKGE_VCT_SET: /* Start VCT test. */ + if (Link == SK_FALSE) { + SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST); + + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE); + if (RetCode == 0) { /* RetCode: 0 => Start! */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK; + + /* + * Start VCT timer counter. + */ + SK_MEMSET((char *) &Para, 0, sizeof(Para)); + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para); + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + else { /* RetCode: 2 => Running! */ + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + } + else { /* RetCode: 4 => Link! */ + RetCode = 4; + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + Offset += sizeof(SK_U32); + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + +} /* Vct */ + + +PNMI_STATIC void CheckVctStatus( +SK_AC *pAC, +SK_IOC IoC, +char *pBuf, +SK_U32 Offset, +SK_U32 PhysPortIndex) +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctData; + SK_U32 RetCode; + SK_U8 LinkSpeedUsed; + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + pVctData = (SK_PNMI_VCT *) (pBuf + Offset); + pVctData->VctStatus = SK_PNMI_VCT_NONE; + + if (!pPrt->PHWLinkUp) { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) { + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + else { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + /* Check VCT test status. */ + RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { /* VCT test is running. */ + pVctData->VctStatus |= SK_PNMI_VCT_RUNNING; + } + else { /* VCT data was copied to pAC here. Check PENDING state. */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + if (pPrt->PCableLen != 0xff) { /* Old DSP value. */ + pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA; + } + } + else { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + + /* DSP only valid in 100/1000 modes. */ + LinkSpeedUsed = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; + if (LinkSpeedUsed != SK_LSPEED_STAT_10MBPS) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA; + } + } + +} /* CheckVctStatus */ + +#endif /* CONFIG_SK98 */ -- cgit v1.1