From dcd5a593f59b58da4875e3e78d7c74501bc319c4 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 2 Aug 2012 22:08:40 +0000 Subject: net: sh_eth: Add support R8A7740 of rmobile (arm core) R8A7740 of rmobile has ethernet device, and this is same IP of sh-ether. This support R8A7740 of rmobile. Signed-off-by: Hideyuki Sano Signed-off-by: Nobuhiro Iwamatsu --- drivers/net/sh_eth.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/net/sh_eth.h') diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 3703c55..61d2df9 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -1,8 +1,8 @@ /* * sh_eth.h - Driver for Renesas SuperH ethernet controler. * - * Copyright (C) 2008, 2011 Renesas Solutions Corp. - * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu + * Copyright (C) 2008 - 2012 Renesas Solutions Corp. + * Copyright (c) 2008 - 2012 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz * * This program is free software; you can redistribute it and/or modify @@ -25,6 +25,7 @@ #define SHETHER_NAME "sh_eth" +#if defined(CONFIG_SH) /* Malloc returns addresses in the P1 area (cacheable). However we need to use area P2 (non-cacheable) */ #define ADDR_TO_P2(addr) ((((int)(addr) & ~0xe0000000) | 0xa0000000)) @@ -35,6 +36,12 @@ #else #define ADDR_TO_PHY(addr) ((int)(addr) & ~0xe0000000) #endif +#elif defined(CONFIG_ARM) +#define inl readl +#define outl writel +#define ADDR_TO_PHY(addr) ((int)(addr)) +#define ADDR_TO_P2(addr) (addr) +#endif /* defined(CONFIG_SH) */ /* Number of supported ports */ #define MAX_PORT_NUM 2 @@ -292,6 +299,9 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #elif defined(CONFIG_CPU_SH7724) #define SH_ETH_TYPE_ETHER #define BASE_IO_ADDR 0xA4600000 +#elif defined(CONFIG_R8A7740) +#define SH_ETH_TYPE_GETHER +#define BASE_IO_ADDR 0xE9A00000 #endif /* -- cgit v1.1