From 2439e4bfa111babf4bc07ba20efbf3e36036813e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 21 Nov 2007 21:19:24 +0100 Subject: drivers/net : move net drivers to drivers/net Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/net/3c589.c | 519 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 519 insertions(+) create mode 100644 drivers/net/3c589.c (limited to 'drivers/net/3c589.c') diff --git a/drivers/net/3c589.c b/drivers/net/3c589.c new file mode 100644 index 0000000..080b686 --- /dev/null +++ b/drivers/net/3c589.c @@ -0,0 +1,519 @@ +/*------------------------------------------------------------------------ + . 3c589.c + . This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device. + . + . (C) Copyright 2002 + . Sysgo Real-Time Solutions, GmbH + . Rolf Offermanns + . + . This program is free software; you can redistribute it and/or modify + . it under the terms of the GNU General Public License as published by + . the Free Software Foundation; either version 2 of the License, or + . (at your option) any later version. + . + . This program is distributed in the hope that it will be useful, + . but WITHOUT ANY WARRANTY; without even the implied warranty of + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . GNU General Public License for more details. + . + . You should have received a copy of the GNU General Public License + . along with this program; if not, write to the Free Software + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . + ----------------------------------------------------------------------------*/ + +#include +#include +#include + +#ifdef CONFIG_DRIVER_3C589 + +#include "3c589.h" + + +/* Use power-down feature of the chip */ +#define POWER_DOWN 0 + +#define NO_AUTOPROBE + +static const char version[] = + "Your ad here! :P\n"; + + +#undef EL_DEBUG + +typedef unsigned char byte; +typedef unsigned short word; +typedef unsigned long int dword; +/*------------------------------------------------------------------------ + . + . Configuration options, for the experienced user to change. + . + -------------------------------------------------------------------------*/ + +/* + . Wait time for memory to be free. This probably shouldn't be + . tuned that much, as waiting for this means nothing else happens + . in the system +*/ +#define MEMORY_WAIT_TIME 16 + + +#if (EL_DEBUG > 2 ) +#define PRINTK3(args...) printf(args) +#else +#define PRINTK3(args...) +#endif + +#if EL_DEBUG > 1 +#define PRINTK2(args...) printf(args) +#else +#define PRINTK2(args...) +#endif + +#ifdef EL_DEBUG +#define PRINTK(args...) printf(args) +#else +#define PRINTK(args...) +#endif + +#define outb(args...) mmio_outb(args) +#define mmio_outb(value, addr) (*((volatile byte *)(addr)) = value) + +#define inb(args...) mmio_inb(args) +#define mmio_inb(addr) (*((volatile byte *)(addr))) + +#define outw(args...) mmio_outw(args) +#define mmio_outw(value, addr) (*((volatile word *)(addr)) = value) + +#define inw(args...) mmio_inw(args) +#define mmio_inw(addr) (*((volatile word *)(addr))) + +#define outsw(args...) mmio_outsw(args) +#define mmio_outsw(r,b,l) ({ int __i; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + mmio_outw( *(__b2 + __i), r); \ + } \ + }) + +#define insw(args...) mmio_insw(args) +#define mmio_insw(r,b,l) ({ int __i ; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = mmio_inw(r); \ + mmio_inw(0); \ + }; \ + }) + +/*------------------------------------------------------------------------ + . + . The internal workings of the driver. If you are changing anything + . here with the 3Com stuff, you should have the datasheet and know + . what you are doing. + . + -------------------------------------------------------------------------*/ +#define EL_BASE_ADDR 0x20000000 + + +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_TIMER 0x0a +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +#define EEPROM_READ 0x0080 + +#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD) + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum c509cmd { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, + TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, +}; + +enum c509status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 +}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 +}; + +/* Register window 1 offsets, the window used in normal operation. */ +#define TX_FIFO 0x00 +#define RX_FIFO 0x00 +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + + +/* + Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. +*/ +static word read_eeprom(dword ioaddr, int index) +{ + int i; + outw(EEPROM_READ + index, ioaddr + 0xa); + /* Reading the eeprom takes 162 us */ + for (i = 1620; i >= 0; i--) + if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0) + break; + return inw(ioaddr + 0xc); +} + +static void el_get_mac_addr( unsigned char *mac_addr ) +{ + int i; + union + { + word w; + unsigned char b[2]; + } wrd; + unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13; + GO_WINDOW(0); + VX_BUSY_WAIT; + for (i = 0; i < 3; i++) + { + wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i); +#ifdef __BIG_ENDIAN + mac_addr[2*i] = wrd.b[0]; + mac_addr[2*i+1] = wrd.b[1]; +#else + mac_addr[2*i] = wrd.b[1]; + mac_addr[2*i+1] = wrd.b[0]; +#endif + } + GO_WINDOW(old_window); + VX_BUSY_WAIT; +} + + +#if EL_DEBUG > 1 +static void print_packet( byte * buf, int length ) +{ + int i; + int remainder; + int lines; + + PRINTK2("Packet of length %d \n", length ); + + lines = length / 16; + remainder = length % 16; + + for ( i = 0; i < lines ; i ++ ) { + int cur; + + for ( cur = 0; cur < 8; cur ++ ) { + byte a, b; + + a = *(buf ++ ); + b = *(buf ++ ); + PRINTK2("%02x%02x ", a, b ); + } + PRINTK2("\n"); + } + for ( i = 0; i < remainder/2 ; i++ ) { + byte a, b; + + a = *(buf ++ ); + b = *(buf ++ ); + PRINTK2("%02x%02x ", a, b ); + } + PRINTK2("\n"); +} +#endif /* EL_DEBUG > 1 */ + + +/************************************************************************** +ETH_RESET - Reset adapter +***************************************************************************/ +static void el_reset(bd_t *bd) +{ + /*********************************************************** + Reset 3Com 595 card + *************************************************************/ + /* QUICK HACK + * - adjust timing for 3c589 + * - enable io for PCMCIA */ + outw(0x0004, 0xa0000018); + udelay(100); + outw(0x0041, 0x28010000); + udelay(100); + + /* issue global reset */ + outw(GLOBAL_RESET, BASE + VX_COMMAND); + + /* must wait for at least 1ms */ + udelay(100000000); + + /* set mac addr */ + { + unsigned char *mac_addr = bd->bi_enetaddr; + int i; + + el_get_mac_addr( mac_addr ); + + GO_WINDOW(2); + VX_BUSY_WAIT; + + printf("3C589 MAC Addr.: "); + for (i = 0; i < 6; i++) + { + printf("%02x", mac_addr[i]); + outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i); + VX_BUSY_WAIT; + } + printf("\n\n"); + } + + /* set RX filter */ + outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND); + VX_BUSY_WAIT; + + + /* set irq mask and read_zero */ + outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE | + S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND); + VX_BUSY_WAIT; + + outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE | + S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND); + VX_BUSY_WAIT; + + /* enable TP Linkbeat */ + GO_WINDOW(4); + VX_BUSY_WAIT; + + outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE); + VX_BUSY_WAIT; + + +/* + * Attempt to get rid of any stray interrupts that occured during + * configuration. On the i386 this isn't possible because one may + * already be queued. However, a single stray interrupt is + * unimportant. + */ + + outw(ACK_INTR | 0xff, BASE + VX_COMMAND); + VX_BUSY_WAIT; + + /* enable TX and RX */ + outw( RX_ENABLE, BASE + VX_COMMAND ); + VX_BUSY_WAIT; + + outw( TX_ENABLE, BASE + VX_COMMAND ); + VX_BUSY_WAIT; + + + /* print the diag. regs. */ + PRINTK2("Diag. Regs\n"); + PRINTK2("--> MEDIA_TYPE: %04x\n", inw(BASE + VX_W4_MEDIA_TYPE)); + PRINTK2("--> NET_DIAG: %04x\n", inw(BASE + VX_W4_NET_DIAG)); + PRINTK2("--> FIFO_DIAG: %04x\n", inw(BASE + VX_W4_FIFO_DIAG)); + PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS)); + PRINTK2("\n\n"); + + /* enter working mode */ + GO_WINDOW(1); + VX_BUSY_WAIT; + + /* wait for another 1ms */ + udelay(100000000); +} + + +/*----------------------------------------------------------------- + . + . The driver can be entered at any of the following entry points. + . + .------------------------------------------------------------------ */ + +extern int eth_init(bd_t *bd); +extern void eth_halt(void); +extern int eth_rx(void); +extern int eth_send(volatile void *packet, int length); + + +/* + ------------------------------------------------------------ + . + . Internal routines + . + ------------------------------------------------------------ +*/ + +int eth_init(bd_t *bd) +{ + el_reset(bd); + return 0; +} + +void eth_halt() { + return; +} + +#define EDEBUG 1 + + +/************************************************************************** +ETH_POLL - Wait for a frame +***************************************************************************/ + +int eth_rx() +{ + word status, rx_status, packet_size; + + VX_BUSY_WAIT; + + status = inw( BASE + VX_STATUS ); + + if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */ + + /* Packet waiting -> check RX_STATUS */ + rx_status = inw( BASE + VX_W1_RX_STATUS ); + + if ( rx_status & ERR_RX ) + { + /* error in packet -> discard */ + PRINTK("[ERROR] Invalid packet -> discarding\n"); + PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK); + PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1)); + PRINTK("[ERROR] Invalid packet -> discarding\n"); + outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND ); + return 0; + } + + /* correct pack. waiting in fifo */ + packet_size = rx_status & RX_BYTES_MASK; + + PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size); + + { + volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1); + word *RcvBuffer = (word *)(NetRxPackets[0]); + int wcount = 0; + + for (wcount = 0; wcount < (packet_size >> 1); wcount++) + { + *RcvBuffer++ = *(packet_start); + } + + /* handle odd packets */ + if ( packet_size & 1 ) + { + *RcvBuffer++ = *(packet_start); + } + } + + /* fifo should now be empty (besides the padding bytes) */ + if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 ) + { + PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n", + (((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK)); + } + + /* discard packet */ + *((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK; + + /* Pass Packets to upper Layer */ + NetReceive(NetRxPackets[0], packet_size); + return packet_size; +} + + +/************************************************************************** +ETH_TRANSMIT - Transmit a frame +***************************************************************************/ +static char padmap[] = { + 0, 3, 2, 1}; + + +int eth_send(volatile void *packet, int length) { + int pad; + int status; + volatile word *buf = (word *)packet; + int dummy = 0; + + /* padding stuff */ + pad = padmap[length & 3]; + + PRINTK("eth_send(), length: %d\n", length); + /* drop acknowledgements */ + while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) { + if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) { + outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND); + outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND); + PRINTK("Bad status, resetting and reenabling transmitter\n"); + } + + outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS); + } + + + while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) { + /* no room in FIFO */ + if (dummy == 0) + { + PRINTK("No room in FIFO, waiting...\n"); + dummy++; + } + + } + + PRINTK(" ---> FIFO ready\n"); + + + outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1); + + /* Second dword meaningless */ + outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1); + +#if EL_DEBUG > 1 + print_packet((byte *)buf, length); +#endif + + /* write packet */ + { + unsigned int i, totw; + + totw = ((length + 1) >> 1); + PRINTK("Buffer: (totw = %d)\n", totw); + for (i = 0; i < totw; i++) { + outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1); + udelay(10); + } + if(totw & 1) + { /* pad to double word length */ + outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1); + udelay(10); + } + PRINTK("\n\n"); + } + + /* wait for Tx complete */ + PRINTK("Waiting for Tx to complete...\n"); + while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0) + { + udelay(10); + } + PRINTK(" ---> Tx completed, status = 0x%04x\n", status); + + return length; +} + + +#endif /* CONFIG_DRIVER_3C589 */ -- cgit v1.1