From cb82a532669f6b02225ec3429ea4d49ff2b97d0a Mon Sep 17 00:00:00 2001 From: Ulf Samuelsson Date: Fri, 27 Mar 2009 23:26:43 +0100 Subject: Add support for the AT91RM9200EK Board. The AT91RM9200-EK Evaluation Board supports the AT91RM9200 ARM9-based 32-bit RISC microcontroller and enables real-time code development and evaluation. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507 with - NOR (cfi driver) - DataFlash - USB OHCI - Net - I2C (hard) Signed-off-by: Ulf Samuelsson Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/mtd/cfi_flash.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 631b969..175d82a 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1788,13 +1788,10 @@ static void flash_fixup_atmel(flash_info_t *info, struct cfi_qry *qry) /* AT49BV6416(T) list the erase regions in the wrong order. * However, the device ID is identical with the non-broken - * AT49BV642D since u-boot only reads the low byte (they - * differ in the high byte.) So leave out this fixup for now. + * AT49BV642D they differ in the high byte. */ -#if 0 if (info->device_id == 0xd6 || info->device_id == 0xd2) reverse_geometry = !reverse_geometry; -#endif if (reverse_geometry) cfi_reverse_geometry(qry); -- cgit v1.1