From 898e76c938eb169fd19733d4e4c44ba26c6dbd87 Mon Sep 17 00:00:00 2001 From: Jagannadha Sutradharudu Teki Date: Thu, 26 Sep 2013 16:00:15 +0530 Subject: sf: Rename spi_flash files Renamed: spi_flash.c -> sf.c spi_flash_internal.h -> sf_internal.h spi_flash_ops.c -> sf_ops.c spi_flash_probe.c -> sf_probe.c Signed-off-by: Jagannadha Sutradharudu Teki --- drivers/mtd/spi/Makefile | 4 +- drivers/mtd/spi/sf.c | 54 +++++ drivers/mtd/spi/sf_internal.h | 142 ++++++++++++ drivers/mtd/spi/sf_ops.c | 403 +++++++++++++++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 360 +++++++++++++++++++++++++++++++ drivers/mtd/spi/spi_flash.c | 54 ----- drivers/mtd/spi/spi_flash_internal.h | 142 ------------ drivers/mtd/spi/spi_flash_ops.c | 403 ----------------------------------- drivers/mtd/spi/spi_flash_probe.c | 360 ------------------------------- 9 files changed, 961 insertions(+), 961 deletions(-) create mode 100644 drivers/mtd/spi/sf.c create mode 100644 drivers/mtd/spi/sf_internal.h create mode 100644 drivers/mtd/spi/sf_ops.c create mode 100644 drivers/mtd/spi/sf_probe.c delete mode 100644 drivers/mtd/spi/spi_flash.c delete mode 100644 drivers/mtd/spi/spi_flash_internal.h delete mode 100644 drivers/mtd/spi/spi_flash_ops.c delete mode 100644 drivers/mtd/spi/spi_flash_probe.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 0fa867d..86ffc59 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -15,9 +15,9 @@ COBJS-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif ifdef CONFIG_CMD_SF -COBJS-y += spi_flash.o +COBJS-y += sf.o endif -COBJS-$(CONFIG_SPI_FLASH) += spi_flash_probe.o spi_flash_ops.o +COBJS-$(CONFIG_SPI_FLASH) += sf_probe.o sf_ops.o COBJS-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o COBJS-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c new file mode 100644 index 0000000..ddbdda0 --- /dev/null +++ b/drivers/mtd/spi/sf.c @@ -0,0 +1,54 @@ +/* + * SPI flash interface + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * + * Licensed under the GPL-2 or later. + */ + +#include +#include + +static int spi_flash_read_write(struct spi_slave *spi, + const u8 *cmd, size_t cmd_len, + const u8 *data_out, u8 *data_in, + size_t data_len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + + if (data_len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("SF: Failed to send command (%zu bytes): %d\n", + cmd_len, ret); + } else if (data_len != 0) { + ret = spi_xfer(spi, data_len * 8, data_out, data_in, + SPI_XFER_END); + if (ret) + debug("SF: Failed to transfer %zu bytes of data: %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len); +} + +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +{ + return spi_flash_cmd_read(spi, &cmd, 1, response, len); +} + +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len) +{ + return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len); +} diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h new file mode 100644 index 0000000..29a14f4 --- /dev/null +++ b/drivers/mtd/spi/sf_internal.h @@ -0,0 +1,142 @@ +/* + * SPI flash internal definitions + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _SPI_FLASH_INTERNAL_H_ +#define _SPI_FLASH_INTERNAL_H_ + +#define SPI_FLASH_16MB_BOUN 0x1000000 + +/* SECT flags */ +#define SECT_4K (1 << 1) +#define SECT_32K (1 << 2) +#define E_FSR (1 << 3) + +/* Erase commands */ +#define CMD_ERASE_4K 0x20 +#define CMD_ERASE_32K 0x52 +#define CMD_ERASE_CHIP 0xc7 +#define CMD_ERASE_64K 0xd8 + +/* Write commands */ +#define CMD_WRITE_STATUS 0x01 +#define CMD_PAGE_PROGRAM 0x02 +#define CMD_WRITE_DISABLE 0x04 +#define CMD_READ_STATUS 0x05 +#define CMD_WRITE_ENABLE 0x06 +#define CMD_READ_CONFIG 0x35 +#define CMD_FLAG_STATUS 0x70 + +/* Read commands */ +#define CMD_READ_ARRAY_SLOW 0x03 +#define CMD_READ_ARRAY_FAST 0x0b +#define CMD_READ_ID 0x9f + +/* Bank addr access commands */ +#ifdef CONFIG_SPI_FLASH_BAR +# define CMD_BANKADDR_BRWR 0x17 +# define CMD_BANKADDR_BRRD 0x16 +# define CMD_EXTNADDR_WREAR 0xC5 +# define CMD_EXTNADDR_RDEAR 0xC8 +#endif + +/* Common status */ +#define STATUS_WIP 0x01 +#define STATUS_PEC 0x80 + +/* Flash timeout values */ +#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) +#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) +#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) + +/* SST specific */ +#ifdef CONFIG_SPI_FLASH_SST +# define SST_WP 0x01 /* Supports AAI word program */ +# define CMD_SST_BP 0x02 /* Byte Program */ +# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ + +int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, + const void *buf); +#endif + +/* Send a single-byte command to the device and read the response */ +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); + +/* + * Send a multi-byte command to the device and read the response. Used + * for flash array reads, etc. + */ +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +/* + * Send a multi-byte command to the device followed by (optional) + * data. Used for programming the flash array, etc. + */ +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len); + + +/* Flash erase(sectors) operation, support all possible erase commands */ +int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); + +/* Program the status register */ +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); + +/* Set quad enbale bit */ +int spi_flash_set_qeb(struct spi_flash *flash); + +/* Enable writing on the SPI flash */ +static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) +{ + return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); +} + +/* Disable writing on the SPI flash */ +static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) +{ + return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0); +} + +/* + * Send the read status command to the device and wait for the wip + * (write-in-progress) bit to clear itself. + */ +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); + +/* + * Used for spi_flash write operation + * - SPI claim + * - spi_flash_cmd_write_enable + * - spi_flash_cmd_write + * - spi_flash_cmd_wait_ready + * - SPI release + */ +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, const void *buf, size_t buf_len); + +/* + * Flash write operation, support all possible write commands. + * Write the requested data out breaking it up into multiple write + * commands as needed per the write size. + */ +int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + size_t len, const void *buf); + +/* + * Same as spi_flash_cmd_read() except it also claims/releases the SPI + * bus. Used as common part of the ->read() operation. + */ +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +/* Flash read operation, support all possible read commands */ +int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + size_t len, void *data); + +#endif /* _SPI_FLASH_INTERNAL_H_ */ diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c new file mode 100644 index 0000000..c009af5 --- /dev/null +++ b/drivers/mtd/spi/sf_ops.c @@ -0,0 +1,403 @@ +/* + * SPI flash operations + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +#include "sf_internal.h" + +static void spi_flash_addr(u32 addr, u8 *cmd) +{ + /* cmd[0] is actual command */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; +} + +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) +{ + u8 cmd; + int ret; + + cmd = CMD_WRITE_STATUS; + ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1); + if (ret < 0) { + debug("SF: fail to write status register\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_SPI_FLASH_BAR +static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) +{ + u8 cmd; + int ret; + + if (flash->bank_curr == bank_sel) { + debug("SF: not require to enable bank%d\n", bank_sel); + return 0; + } + + cmd = flash->bank_write_cmd; + ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1); + if (ret < 0) { + debug("SF: fail to write bank register\n"); + return ret; + } + flash->bank_curr = bank_sel; + + return 0; +} +#endif + +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) +{ + struct spi_slave *spi = flash->spi; + unsigned long timebase; + int ret; + u8 status; + u8 check_status = 0x0; + u8 poll_bit = STATUS_WIP; + u8 cmd = flash->poll_cmd; + + if (cmd == CMD_FLAG_STATUS) { + poll_bit = STATUS_PEC; + check_status = poll_bit; + } + + ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); + if (ret) { + debug("SF: fail to read %s status register\n", + cmd == CMD_READ_STATUS ? "read" : "flag"); + return ret; + } + + timebase = get_timer(0); + do { + WATCHDOG_RESET(); + + ret = spi_xfer(spi, 8, NULL, &status, 0); + if (ret) + return -1; + + if ((status & poll_bit) == check_status) + break; + + } while (get_timer(timebase) < timeout); + + spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); + + if ((status & poll_bit) == check_status) + return 0; + + /* Timed out */ + debug("SF: time out!\n"); + return -1; +} + +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, const void *buf, size_t buf_len) +{ + struct spi_slave *spi = flash->spi; + unsigned long timeout = SPI_FLASH_PROG_TIMEOUT; + int ret; + + if (buf == NULL) + timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: unable to claim SPI bus\n"); + return ret; + } + + ret = spi_flash_cmd_write_enable(flash); + if (ret < 0) { + debug("SF: enabling write failed\n"); + return ret; + } + + ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len); + if (ret < 0) { + debug("SF: write cmd failed\n"); + return ret; + } + + ret = spi_flash_cmd_wait_ready(flash, timeout); + if (ret < 0) { + debug("SF: write %s timed out\n", + timeout == SPI_FLASH_PROG_TIMEOUT ? + "program" : "page erase"); + return ret; + } + + spi_release_bus(spi); + + return ret; +} + +int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) +{ + u32 erase_size; + u8 cmd[4]; + int ret = -1; + + erase_size = flash->erase_size; + if (offset % erase_size || len % erase_size) { + debug("SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + cmd[0] = flash->erase_cmd; + while (len) { +#ifdef CONFIG_SPI_FLASH_BAR + u8 bank_sel; + + bank_sel = offset / SPI_FLASH_16MB_BOUN; + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } +#endif + spi_flash_addr(offset, cmd); + + debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], offset); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); + if (ret < 0) { + debug("SF: erase failed\n"); + break; + } + + offset += erase_size; + len -= erase_size; + } + + return ret; +} + +int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + size_t len, const void *buf) +{ + unsigned long byte_addr, page_size; + size_t chunk_len, actual; + u8 cmd[4]; + int ret = -1; + + page_size = flash->page_size; + + cmd[0] = CMD_PAGE_PROGRAM; + for (actual = 0; actual < len; actual += chunk_len) { +#ifdef CONFIG_SPI_FLASH_BAR + u8 bank_sel; + + bank_sel = offset / SPI_FLASH_16MB_BOUN; + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } +#endif + byte_addr = offset % page_size; + chunk_len = min(len - actual, page_size - byte_addr); + + if (flash->spi->max_write_size) + chunk_len = min(chunk_len, flash->spi->max_write_size); + + spi_flash_addr(offset, cmd); + + debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), + buf + actual, chunk_len); + if (ret < 0) { + debug("SF: write failed\n"); + break; + } + + offset += chunk_len; + } + + return ret; +} + +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + struct spi_slave *spi = flash->spi; + int ret; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: unable to claim SPI bus\n"); + return ret; + } + + ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); + if (ret < 0) { + debug("SF: read cmd failed\n"); + return ret; + } + + spi_release_bus(spi); + + return ret; +} + +int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + size_t len, void *data) +{ + u8 cmd[5], bank_sel = 0; + u32 remain_len, read_len; + int ret = -1; + + /* Handle memory-mapped SPI */ + if (flash->memory_map) { + memcpy(data, flash->memory_map + offset, len); + return 0; + } + + cmd[0] = CMD_READ_ARRAY_FAST; + cmd[4] = 0x00; + + while (len) { +#ifdef CONFIG_SPI_FLASH_BAR + bank_sel = offset / SPI_FLASH_16MB_BOUN; + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } +#endif + remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset); + if (len < remain_len) + read_len = len; + else + read_len = remain_len; + + spi_flash_addr(offset, cmd); + + ret = spi_flash_read_common(flash, cmd, sizeof(cmd), + data, read_len); + if (ret < 0) { + debug("SF: read failed\n"); + break; + } + + offset += read_len; + len -= read_len; + data += read_len; + } + + return ret; +} + +#ifdef CONFIG_SPI_FLASH_SST +static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) +{ + int ret; + u8 cmd[4] = { + CMD_SST_BP, + offset >> 16, + offset >> 8, + offset, + }; + + debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); + + ret = spi_flash_cmd_write_enable(flash); + if (ret) + return ret; + + ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); + if (ret) + return ret; + + return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); +} + +int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, + const void *buf) +{ + size_t actual, cmd_len; + int ret; + u8 cmd[4]; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + /* If the data is not word aligned, write out leading single byte */ + actual = offset % 2; + if (actual) { + ret = sst_byte_write(flash, offset, buf); + if (ret) + goto done; + } + offset += actual; + + ret = spi_flash_cmd_write_enable(flash); + if (ret) + goto done; + + cmd_len = 4; + cmd[0] = CMD_SST_AAI_WP; + cmd[1] = offset >> 16; + cmd[2] = offset >> 8; + cmd[3] = offset; + + for (; actual < len - 1; actual += 2) { + debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, + cmd[0], offset); + + ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, + buf + actual, 2); + if (ret) { + debug("SF: sst word program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + cmd_len = 1; + offset += 2; + } + + if (!ret) + ret = spi_flash_cmd_write_disable(flash); + + /* If there is a single trailing byte, write it out */ + if (!ret && actual != len) + ret = sst_byte_write(flash, offset, buf + actual); + + done: + debug("SF: sst: program %s %zu bytes @ 0x%zx\n", + ret ? "failure" : "success", len, offset - actual); + + spi_release_bus(flash->spi); + return ret; +} +#endif diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c new file mode 100644 index 0000000..8f56c63 --- /dev/null +++ b/drivers/mtd/spi/sf_probe.c @@ -0,0 +1,360 @@ +/* + * SPI flash probing + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include + +#include "sf_internal.h" + +DECLARE_GLOBAL_DATA_PTR; + +/** + * struct spi_flash_params - SPI/QSPI flash device params structure + * + * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) + * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) + * @ext_jedec: Device ext_jedec ID + * @sector_size: Sector size of this device + * @nr_sectors: No.of sectors on this device + * @flags: Importent param, for flash specific behaviour + */ +struct spi_flash_params { + const char *name; + u32 jedec; + u16 ext_jedec; + u32 sector_size; + u32 nr_sectors; + u16 flags; +}; + +static const struct spi_flash_params spi_flash_params_table[] = { +#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ + {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, SECT_4K}, + {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, SECT_4K}, + {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, SECT_4K}, + {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, SECT_4K}, + {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, SECT_4K}, + {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, SECT_4K}, + {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_EON /* EON */ + {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0}, + {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K}, + {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ + {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K}, + {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ + {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0}, + {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0}, + {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0}, + {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0}, + {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0}, + {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0}, + {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0}, + {"MX25L51235F", 0xc2201A, 0x0, 64 * 1024, 1024, 0}, + {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ + {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0}, + {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0}, + {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0}, + {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0}, + {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, 0}, + {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, 0}, + {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, 0}, + {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, 0}, + {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, 0}, + {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, 0}, + {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, 0}, + {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, 0}, + {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ + {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0}, + {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0}, + {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0}, + {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0}, + {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0}, + {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0}, + {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0}, + {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0}, + {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, SECT_4K}, + {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, SECT_4K}, + {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, SECT_4K}, + {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, SECT_4K}, + {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, SECT_4K}, + {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, SECT_4K}, + {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, SECT_4K}, + {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, SECT_4K}, + {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K}, + {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K}, + {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K}, + {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_SST /* SST */ + {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, SECT_4K | SST_WP}, + {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, SECT_4K | SST_WP}, + {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, SECT_4K | SST_WP}, + {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, SECT_4K | SST_WP}, + {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, SECT_4K}, + {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, SECT_4K | SST_WP}, + {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, SECT_4K | SST_WP}, + {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, SECT_4K | SST_WP}, + {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, SECT_4K | SST_WP}, + {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, SECT_4K | SST_WP}, +#endif +#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ + {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0}, + {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0}, + {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0}, + {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, SECT_4K}, + {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, SECT_4K}, + {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, SECT_4K}, + {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, SECT_4K}, + {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, SECT_4K}, + {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, SECT_4K}, + {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, SECT_4K}, + {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, SECT_4K}, + {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, SECT_4K}, + {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, SECT_4K}, + {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, SECT_4K}, + {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, SECT_4K}, + {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, SECT_4K}, + {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, SECT_4K}, + {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, SECT_4K}, +#endif + /* + * Note: + * Below paired flash devices has similar spi_flash_params params. + * (S25FL129P_64K, S25FL128S_64K) + * (W25Q80BL, W25Q80BV) + * (W25Q16CL, W25Q16DV) + * (W25Q32BV, W25Q32FV_SPI) + * (W25Q64CV, W25Q64FV_SPI) + * (W25Q128BV, W25Q128FV_SPI) + * (W25Q32DW, W25Q32FV_QPI) + * (W25Q64DW, W25Q64FV_QPI) + * (W25Q128FW, W25Q128FV_QPI) + */ +}; + +struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, u8 *idcode) +{ + const struct spi_flash_params *params; + struct spi_flash *flash; + int i; + u16 jedec = idcode[1] << 8 | idcode[2]; + u16 ext_jedec = idcode[3] << 8 | idcode[4]; + + /* Get the flash id (jedec = manuf_id + dev_id, ext_jedec) */ + for (i = 0; i < ARRAY_SIZE(spi_flash_params_table); i++) { + params = &spi_flash_params_table[i]; + if ((params->jedec >> 16) == idcode[0]) { + if ((params->jedec & 0xFFFF) == jedec) { + if (params->ext_jedec == 0) + break; + else if (params->ext_jedec == ext_jedec) + break; + } + } + } + + if (i == ARRAY_SIZE(spi_flash_params_table)) { + printf("SF: Unsupported flash IDs: "); + printf("manuf %02x, jedec %04x, ext_jedec %04x\n", + idcode[0], jedec, ext_jedec); + return NULL; + } + + flash = malloc(sizeof(*flash)); + if (!flash) { + debug("SF: Failed to allocate spi_flash\n"); + return NULL; + } + memset(flash, '\0', sizeof(*flash)); + + flash->spi = spi; + flash->name = params->name; + + /* Assign spi_flash ops */ + flash->write = spi_flash_cmd_write_ops; +#ifdef CONFIG_SPI_FLASH_SST + if (params->flags & SST_WP) + flash->write = sst_write_wp; +#endif + flash->erase = spi_flash_cmd_erase_ops; + flash->read = spi_flash_cmd_read_ops; + + /* Compute the flash size */ + flash->page_size = (ext_jedec == 0x4d00) ? 512 : 256; + flash->sector_size = params->sector_size; + flash->size = flash->sector_size * params->nr_sectors; + + /* Compute erase sector and command */ + if (params->flags & SECT_4K) { + flash->erase_cmd = CMD_ERASE_4K; + flash->erase_size = 4096; + } else if (params->flags & SECT_32K) { + flash->erase_cmd = CMD_ERASE_32K; + flash->erase_size = 32768; + } else { + flash->erase_cmd = CMD_ERASE_64K; + flash->erase_size = flash->sector_size; + } + + /* Poll cmd seclection */ + flash->poll_cmd = CMD_READ_STATUS; +#ifdef CONFIG_SPI_FLASH_STMICRO + if (params->flags & E_FSR) + flash->poll_cmd = CMD_FLAG_STATUS; +#endif + +#ifdef CONFIG_SPI_FLASH_BAR + /* Configure the BAR - discover bank cmds and read current bank */ + u8 curr_bank = 0; + if (flash->size > SPI_FLASH_16MB_BOUN) { + flash->bank_read_cmd = (idcode[0] == 0x01) ? + CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR; + flash->bank_write_cmd = (idcode[0] == 0x01) ? + CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR; + + if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1, + &curr_bank, 1)) { + debug("SF: fail to read bank addr register\n"); + return NULL; + } + flash->bank_curr = curr_bank; + } else { + flash->bank_curr = curr_bank; + } +#endif + + /* Flash powers up read-only, so clear BP# bits */ +#if defined(CONFIG_SPI_FLASH_ATMEL) || \ + defined(CONFIG_SPI_FLASH_MACRONIX) || \ + defined(CONFIG_SPI_FLASH_SST) + spi_flash_cmd_write_status(flash, 0); +#endif + + return flash; +} + +#ifdef CONFIG_OF_CONTROL +int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) +{ + fdt_addr_t addr; + fdt_size_t size; + int node; + + /* If there is no node, do nothing */ + node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); + if (node < 0) + return 0; + + addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); + if (addr == FDT_ADDR_T_NONE) { + debug("%s: Cannot decode address\n", __func__); + return 0; + } + + if (flash->size != size) { + debug("%s: Memory map must cover entire device\n", __func__); + return -1; + } + flash->memory_map = (void *)addr; + + return 0; +} +#endif /* CONFIG_OF_CONTROL */ + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + struct spi_flash *flash = NULL; + u8 idcode[5]; + int ret; + + /* Setup spi_slave */ + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + printf("SF: Failed to set up slave\n"); + return NULL; + } + + /* Claim spi bus */ + ret = spi_claim_bus(spi); + if (ret) { + debug("SF: Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + /* Read the ID codes */ + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) { + printf("SF: Failed to get idcodes\n"); + goto err_read_id; + } + +#ifdef DEBUG + printf("SF: Got idcodes\n"); + print_buffer(0, idcode, 1, sizeof(idcode), 0); +#endif + + /* Validate params from spi_flash_params table */ + flash = spi_flash_validate_params(spi, idcode); + if (!flash) + goto err_read_id; + +#ifdef CONFIG_OF_CONTROL + if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { + debug("SF: FDT decode error\n"); + goto err_read_id; + } +#endif +#ifndef CONFIG_SPL_BUILD + printf("SF: Detected %s with page size ", flash->name); + print_size(flash->page_size, ", erase size "); + print_size(flash->erase_size, ", total "); + print_size(flash->size, ""); + if (flash->memory_map) + printf(", mapped at %p", flash->memory_map); + puts("\n"); +#endif +#ifndef CONFIG_SPI_FLASH_BAR + if (flash->size > SPI_FLASH_16MB_BOUN) { + puts("SF: Warning - Only lower 16MiB accessible,"); + puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); + } +#endif + + /* Release spi bus */ + spi_release_bus(spi); + + return flash; + +err_read_id: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +void spi_flash_free(struct spi_flash *flash) +{ + spi_free_slave(flash->spi); + free(flash); +} diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c deleted file mode 100644 index ddbdda0..0000000 --- a/drivers/mtd/spi/spi_flash.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * SPI flash interface - * - * Copyright (C) 2008 Atmel Corporation - * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik - * - * Licensed under the GPL-2 or later. - */ - -#include -#include - -static int spi_flash_read_write(struct spi_slave *spi, - const u8 *cmd, size_t cmd_len, - const u8 *data_out, u8 *data_in, - size_t data_len) -{ - unsigned long flags = SPI_XFER_BEGIN; - int ret; - - if (data_len == 0) - flags |= SPI_XFER_END; - - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); - if (ret) { - debug("SF: Failed to send command (%zu bytes): %d\n", - cmd_len, ret); - } else if (data_len != 0) { - ret = spi_xfer(spi, data_len * 8, data_out, data_in, - SPI_XFER_END); - if (ret) - debug("SF: Failed to transfer %zu bytes of data: %d\n", - data_len, ret); - } - - return ret; -} - -int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len) -{ - return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len); -} - -int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) -{ - return spi_flash_cmd_read(spi, &cmd, 1, response, len); -} - -int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, - const void *data, size_t data_len) -{ - return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len); -} diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h deleted file mode 100644 index 29a14f4..0000000 --- a/drivers/mtd/spi/spi_flash_internal.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * SPI flash internal definitions - * - * Copyright (C) 2008 Atmel Corporation - * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _SPI_FLASH_INTERNAL_H_ -#define _SPI_FLASH_INTERNAL_H_ - -#define SPI_FLASH_16MB_BOUN 0x1000000 - -/* SECT flags */ -#define SECT_4K (1 << 1) -#define SECT_32K (1 << 2) -#define E_FSR (1 << 3) - -/* Erase commands */ -#define CMD_ERASE_4K 0x20 -#define CMD_ERASE_32K 0x52 -#define CMD_ERASE_CHIP 0xc7 -#define CMD_ERASE_64K 0xd8 - -/* Write commands */ -#define CMD_WRITE_STATUS 0x01 -#define CMD_PAGE_PROGRAM 0x02 -#define CMD_WRITE_DISABLE 0x04 -#define CMD_READ_STATUS 0x05 -#define CMD_WRITE_ENABLE 0x06 -#define CMD_READ_CONFIG 0x35 -#define CMD_FLAG_STATUS 0x70 - -/* Read commands */ -#define CMD_READ_ARRAY_SLOW 0x03 -#define CMD_READ_ARRAY_FAST 0x0b -#define CMD_READ_ID 0x9f - -/* Bank addr access commands */ -#ifdef CONFIG_SPI_FLASH_BAR -# define CMD_BANKADDR_BRWR 0x17 -# define CMD_BANKADDR_BRRD 0x16 -# define CMD_EXTNADDR_WREAR 0xC5 -# define CMD_EXTNADDR_RDEAR 0xC8 -#endif - -/* Common status */ -#define STATUS_WIP 0x01 -#define STATUS_PEC 0x80 - -/* Flash timeout values */ -#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) -#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) -#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) - -/* SST specific */ -#ifdef CONFIG_SPI_FLASH_SST -# define SST_WP 0x01 /* Supports AAI word program */ -# define CMD_SST_BP 0x02 /* Byte Program */ -# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ - -int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, - const void *buf); -#endif - -/* Send a single-byte command to the device and read the response */ -int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); - -/* - * Send a multi-byte command to the device and read the response. Used - * for flash array reads, etc. - */ -int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len); - -/* - * Send a multi-byte command to the device followed by (optional) - * data. Used for programming the flash array, etc. - */ -int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, - const void *data, size_t data_len); - - -/* Flash erase(sectors) operation, support all possible erase commands */ -int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); - -/* Program the status register */ -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr); - -/* Set quad enbale bit */ -int spi_flash_set_qeb(struct spi_flash *flash); - -/* Enable writing on the SPI flash */ -static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) -{ - return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); -} - -/* Disable writing on the SPI flash */ -static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) -{ - return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0); -} - -/* - * Send the read status command to the device and wait for the wip - * (write-in-progress) bit to clear itself. - */ -int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); - -/* - * Used for spi_flash write operation - * - SPI claim - * - spi_flash_cmd_write_enable - * - spi_flash_cmd_write - * - spi_flash_cmd_wait_ready - * - SPI release - */ -int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, - size_t cmd_len, const void *buf, size_t buf_len); - -/* - * Flash write operation, support all possible write commands. - * Write the requested data out breaking it up into multiple write - * commands as needed per the write size. - */ -int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, - size_t len, const void *buf); - -/* - * Same as spi_flash_cmd_read() except it also claims/releases the SPI - * bus. Used as common part of the ->read() operation. - */ -int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len); - -/* Flash read operation, support all possible read commands */ -int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, - size_t len, void *data); - -#endif /* _SPI_FLASH_INTERNAL_H_ */ diff --git a/drivers/mtd/spi/spi_flash_ops.c b/drivers/mtd/spi/spi_flash_ops.c deleted file mode 100644 index 882c8f5..0000000 --- a/drivers/mtd/spi/spi_flash_ops.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * SPI flash operations - * - * Copyright (C) 2008 Atmel Corporation - * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik - * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include - -#include "spi_flash_internal.h" - -static void spi_flash_addr(u32 addr, u8 *cmd) -{ - /* cmd[0] is actual command */ - cmd[1] = addr >> 16; - cmd[2] = addr >> 8; - cmd[3] = addr >> 0; -} - -int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) -{ - u8 cmd; - int ret; - - cmd = CMD_WRITE_STATUS; - ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1); - if (ret < 0) { - debug("SF: fail to write status register\n"); - return ret; - } - - return 0; -} - -#ifdef CONFIG_SPI_FLASH_BAR -static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) -{ - u8 cmd; - int ret; - - if (flash->bank_curr == bank_sel) { - debug("SF: not require to enable bank%d\n", bank_sel); - return 0; - } - - cmd = flash->bank_write_cmd; - ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1); - if (ret < 0) { - debug("SF: fail to write bank register\n"); - return ret; - } - flash->bank_curr = bank_sel; - - return 0; -} -#endif - -int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 status; - u8 check_status = 0x0; - u8 poll_bit = STATUS_WIP; - u8 cmd = flash->poll_cmd; - - if (cmd == CMD_FLAG_STATUS) { - poll_bit = STATUS_PEC; - check_status = poll_bit; - } - - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: fail to read %s status register\n", - cmd == CMD_READ_STATUS ? "read" : "flag"); - return ret; - } - - timebase = get_timer(0); - do { - WATCHDOG_RESET(); - - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; - - if ((status & poll_bit) == check_status) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if ((status & poll_bit) == check_status) - return 0; - - /* Timed out */ - debug("SF: time out!\n"); - return -1; -} - -int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, - size_t cmd_len, const void *buf, size_t buf_len) -{ - struct spi_slave *spi = flash->spi; - unsigned long timeout = SPI_FLASH_PROG_TIMEOUT; - int ret; - - if (buf == NULL) - timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: unable to claim SPI bus\n"); - return ret; - } - - ret = spi_flash_cmd_write_enable(flash); - if (ret < 0) { - debug("SF: enabling write failed\n"); - return ret; - } - - ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len); - if (ret < 0) { - debug("SF: write cmd failed\n"); - return ret; - } - - ret = spi_flash_cmd_wait_ready(flash, timeout); - if (ret < 0) { - debug("SF: write %s timed out\n", - timeout == SPI_FLASH_PROG_TIMEOUT ? - "program" : "page erase"); - return ret; - } - - spi_release_bus(spi); - - return ret; -} - -int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) -{ - u32 erase_size; - u8 cmd[4]; - int ret = -1; - - erase_size = flash->erase_size; - if (offset % erase_size || len % erase_size) { - debug("SF: Erase offset/length not multiple of erase size\n"); - return -1; - } - - cmd[0] = flash->erase_cmd; - while (len) { -#ifdef CONFIG_SPI_FLASH_BAR - u8 bank_sel; - - bank_sel = offset / SPI_FLASH_16MB_BOUN; - - ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); - if (ret) { - debug("SF: fail to set bank%d\n", bank_sel); - return ret; - } -#endif - spi_flash_addr(offset, cmd); - - debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], - cmd[2], cmd[3], offset); - - ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); - if (ret < 0) { - debug("SF: erase failed\n"); - break; - } - - offset += erase_size; - len -= erase_size; - } - - return ret; -} - -int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, - size_t len, const void *buf) -{ - unsigned long byte_addr, page_size; - size_t chunk_len, actual; - u8 cmd[4]; - int ret = -1; - - page_size = flash->page_size; - - cmd[0] = CMD_PAGE_PROGRAM; - for (actual = 0; actual < len; actual += chunk_len) { -#ifdef CONFIG_SPI_FLASH_BAR - u8 bank_sel; - - bank_sel = offset / SPI_FLASH_16MB_BOUN; - - ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); - if (ret) { - debug("SF: fail to set bank%d\n", bank_sel); - return ret; - } -#endif - byte_addr = offset % page_size; - chunk_len = min(len - actual, page_size - byte_addr); - - if (flash->spi->max_write_size) - chunk_len = min(chunk_len, flash->spi->max_write_size); - - spi_flash_addr(offset, cmd); - - debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", - buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); - - ret = spi_flash_write_common(flash, cmd, sizeof(cmd), - buf + actual, chunk_len); - if (ret < 0) { - debug("SF: write failed\n"); - break; - } - - offset += chunk_len; - } - - return ret; -} - -int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len) -{ - struct spi_slave *spi = flash->spi; - int ret; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: unable to claim SPI bus\n"); - return ret; - } - - ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); - if (ret < 0) { - debug("SF: read cmd failed\n"); - return ret; - } - - spi_release_bus(spi); - - return ret; -} - -int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, - size_t len, void *data) -{ - u8 cmd[5], bank_sel = 0; - u32 remain_len, read_len; - int ret = -1; - - /* Handle memory-mapped SPI */ - if (flash->memory_map) { - memcpy(data, flash->memory_map + offset, len); - return 0; - } - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[4] = 0x00; - - while (len) { -#ifdef CONFIG_SPI_FLASH_BAR - bank_sel = offset / SPI_FLASH_16MB_BOUN; - - ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); - if (ret) { - debug("SF: fail to set bank%d\n", bank_sel); - return ret; - } -#endif - remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset); - if (len < remain_len) - read_len = len; - else - read_len = remain_len; - - spi_flash_addr(offset, cmd); - - ret = spi_flash_read_common(flash, cmd, sizeof(cmd), - data, read_len); - if (ret < 0) { - debug("SF: read failed\n"); - break; - } - - offset += read_len; - len -= read_len; - data += read_len; - } - - return ret; -} - -#ifdef CONFIG_SPI_FLASH_SST -static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) -{ - int ret; - u8 cmd[4] = { - CMD_SST_BP, - offset >> 16, - offset >> 8, - offset, - }; - - debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); - - ret = spi_flash_cmd_write_enable(flash); - if (ret) - return ret; - - ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); - if (ret) - return ret; - - return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); -} - -int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, - const void *buf) -{ - size_t actual, cmd_len; - int ret; - u8 cmd[4]; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - /* If the data is not word aligned, write out leading single byte */ - actual = offset % 2; - if (actual) { - ret = sst_byte_write(flash, offset, buf); - if (ret) - goto done; - } - offset += actual; - - ret = spi_flash_cmd_write_enable(flash); - if (ret) - goto done; - - cmd_len = 4; - cmd[0] = CMD_SST_AAI_WP; - cmd[1] = offset >> 16; - cmd[2] = offset >> 8; - cmd[3] = offset; - - for (; actual < len - 1; actual += 2) { - debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, - cmd[0], offset); - - ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, - buf + actual, 2); - if (ret) { - debug("SF: sst word program failed\n"); - break; - } - - ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret) - break; - - cmd_len = 1; - offset += 2; - } - - if (!ret) - ret = spi_flash_cmd_write_disable(flash); - - /* If there is a single trailing byte, write it out */ - if (!ret && actual != len) - ret = sst_byte_write(flash, offset, buf + actual); - - done: - debug("SF: sst: program %s %zu bytes @ 0x%zx\n", - ret ? "failure" : "success", len, offset - actual); - - spi_release_bus(flash->spi); - return ret; -} -#endif diff --git a/drivers/mtd/spi/spi_flash_probe.c b/drivers/mtd/spi/spi_flash_probe.c deleted file mode 100644 index e9fd013..0000000 --- a/drivers/mtd/spi/spi_flash_probe.c +++ /dev/null @@ -1,360 +0,0 @@ -/* - * SPI flash probing - * - * Copyright (C) 2008 Atmel Corporation - * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik - * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include -#include - -#include "spi_flash_internal.h" - -DECLARE_GLOBAL_DATA_PTR; - -/** - * struct spi_flash_params - SPI/QSPI flash device params structure - * - * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) - * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) - * @ext_jedec: Device ext_jedec ID - * @sector_size: Sector size of this device - * @nr_sectors: No.of sectors on this device - * @flags: Importent param, for flash specific behaviour - */ -struct spi_flash_params { - const char *name; - u32 jedec; - u16 ext_jedec; - u32 sector_size; - u32 nr_sectors; - u16 flags; -}; - -static const struct spi_flash_params spi_flash_params_table[] = { -#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ - {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, SECT_4K}, - {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, SECT_4K}, - {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, SECT_4K}, - {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, SECT_4K}, - {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, SECT_4K}, - {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, SECT_4K}, - {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_EON /* EON */ - {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0}, - {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, SECT_4K}, - {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0}, -#endif -#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ - {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, SECT_4K}, - {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ - {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0}, - {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0}, - {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0}, - {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0}, - {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0}, - {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, 0}, - {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, 0}, - {"MX25L51235F", 0xc2201A, 0x0, 64 * 1024, 1024, 0}, - {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, 0}, -#endif -#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ - {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0}, - {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0}, - {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0}, - {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0}, - {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, 0}, - {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, 0}, - {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, 0}, - {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, 0}, - {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, 0}, - {"S25FL256S_256K", 0x010219, 0x4d00, 64 * 1024, 512, 0}, - {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, 0}, - {"S25FL512S_256K", 0x010220, 0x4d00, 64 * 1024, 1024, 0}, - {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, 0}, -#endif -#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ - {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0}, - {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0}, - {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0}, - {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0}, - {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0}, - {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0}, - {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0}, - {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0}, - {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, SECT_4K}, - {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, SECT_4K}, - {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, SECT_4K}, - {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, SECT_4K}, - {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, SECT_4K}, - {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, SECT_4K}, - {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, SECT_4K}, - {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, SECT_4K}, - {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K}, - {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, E_FSR | SECT_4K}, - {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K}, - {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, E_FSR | SECT_4K}, -#endif -#ifdef CONFIG_SPI_FLASH_SST /* SST */ - {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, SECT_4K | SST_WP}, - {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, SECT_4K | SST_WP}, - {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, SECT_4K | SST_WP}, - {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, SECT_4K | SST_WP}, - {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, SECT_4K}, - {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, SECT_4K | SST_WP}, - {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, SECT_4K | SST_WP}, - {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, SECT_4K | SST_WP}, - {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, SECT_4K | SST_WP}, - {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, SECT_4K | SST_WP}, -#endif -#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ - {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0}, - {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0}, - {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0}, - {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, SECT_4K}, - {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, SECT_4K}, - {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, SECT_4K}, - {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, SECT_4K}, - {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, SECT_4K}, - {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, SECT_4K}, - {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, SECT_4K}, - {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, SECT_4K}, - {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, SECT_4K}, - {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, SECT_4K}, - {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, SECT_4K}, - {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, SECT_4K}, - {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, SECT_4K}, - {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, SECT_4K}, - {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, SECT_4K}, -#endif - /* - * Note: - * Below paired flash devices has similar spi_flash_params params. - * (S25FL129P_64K, S25FL128S_64K) - * (W25Q80BL, W25Q80BV) - * (W25Q16CL, W25Q16DV) - * (W25Q32BV, W25Q32FV_SPI) - * (W25Q64CV, W25Q64FV_SPI) - * (W25Q128BV, W25Q128FV_SPI) - * (W25Q32DW, W25Q32FV_QPI) - * (W25Q64DW, W25Q64FV_QPI) - * (W25Q128FW, W25Q128FV_QPI) - */ -}; - -struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, u8 *idcode) -{ - const struct spi_flash_params *params; - struct spi_flash *flash; - int i; - u16 jedec = idcode[1] << 8 | idcode[2]; - u16 ext_jedec = idcode[3] << 8 | idcode[4]; - - /* Get the flash id (jedec = manuf_id + dev_id, ext_jedec) */ - for (i = 0; i < ARRAY_SIZE(spi_flash_params_table); i++) { - params = &spi_flash_params_table[i]; - if ((params->jedec >> 16) == idcode[0]) { - if ((params->jedec & 0xFFFF) == jedec) { - if (params->ext_jedec == 0) - break; - else if (params->ext_jedec == ext_jedec) - break; - } - } - } - - if (i == ARRAY_SIZE(spi_flash_params_table)) { - printf("SF: Unsupported flash IDs: "); - printf("manuf %02x, jedec %04x, ext_jedec %04x\n", - idcode[0], jedec, ext_jedec); - return NULL; - } - - flash = malloc(sizeof(*flash)); - if (!flash) { - debug("SF: Failed to allocate spi_flash\n"); - return NULL; - } - memset(flash, '\0', sizeof(*flash)); - - flash->spi = spi; - flash->name = params->name; - - /* Assign spi_flash ops */ - flash->write = spi_flash_cmd_write_ops; -#ifdef CONFIG_SPI_FLASH_SST - if (params->flags & SST_WP) - flash->write = sst_write_wp; -#endif - flash->erase = spi_flash_cmd_erase_ops; - flash->read = spi_flash_cmd_read_ops; - - /* Compute the flash size */ - flash->page_size = (ext_jedec == 0x4d00) ? 512 : 256; - flash->sector_size = params->sector_size; - flash->size = flash->sector_size * params->nr_sectors; - - /* Compute erase sector and command */ - if (params->flags & SECT_4K) { - flash->erase_cmd = CMD_ERASE_4K; - flash->erase_size = 4096; - } else if (params->flags & SECT_32K) { - flash->erase_cmd = CMD_ERASE_32K; - flash->erase_size = 32768; - } else { - flash->erase_cmd = CMD_ERASE_64K; - flash->erase_size = flash->sector_size; - } - - /* Poll cmd seclection */ - flash->poll_cmd = CMD_READ_STATUS; -#ifdef CONFIG_SPI_FLASH_STMICRO - if (params->flags & E_FSR) - flash->poll_cmd = CMD_FLAG_STATUS; -#endif - -#ifdef CONFIG_SPI_FLASH_BAR - /* Configure the BAR - discover bank cmds and read current bank */ - u8 curr_bank = 0; - if (flash->size > SPI_FLASH_16MB_BOUN) { - flash->bank_read_cmd = (idcode[0] == 0x01) ? - CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR; - flash->bank_write_cmd = (idcode[0] == 0x01) ? - CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR; - - if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1, - &curr_bank, 1)) { - debug("SF: fail to read bank addr register\n"); - return NULL; - } - flash->bank_curr = curr_bank; - } else { - flash->bank_curr = curr_bank; - } -#endif - - /* Flash powers up read-only, so clear BP# bits */ -#if defined(CONFIG_SPI_FLASH_ATMEL) || \ - defined(CONFIG_SPI_FLASH_MACRONIX) || \ - defined(CONFIG_SPI_FLASH_SST) - spi_flash_cmd_write_status(flash, 0); -#endif - - return flash; -} - -#ifdef CONFIG_OF_CONTROL -int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) -{ - fdt_addr_t addr; - fdt_size_t size; - int node; - - /* If there is no node, do nothing */ - node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); - if (node < 0) - return 0; - - addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); - if (addr == FDT_ADDR_T_NONE) { - debug("%s: Cannot decode address\n", __func__); - return 0; - } - - if (flash->size != size) { - debug("%s: Memory map must cover entire device\n", __func__); - return -1; - } - flash->memory_map = (void *)addr; - - return 0; -} -#endif /* CONFIG_OF_CONTROL */ - -struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int spi_mode) -{ - struct spi_slave *spi; - struct spi_flash *flash = NULL; - u8 idcode[5]; - int ret; - - /* Setup spi_slave */ - spi = spi_setup_slave(bus, cs, max_hz, spi_mode); - if (!spi) { - printf("SF: Failed to set up slave\n"); - return NULL; - } - - /* Claim spi bus */ - ret = spi_claim_bus(spi); - if (ret) { - debug("SF: Failed to claim SPI bus: %d\n", ret); - goto err_claim_bus; - } - - /* Read the ID codes */ - ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); - if (ret) { - printf("SF: Failed to get idcodes\n"); - goto err_read_id; - } - -#ifdef DEBUG - printf("SF: Got idcodes\n"); - print_buffer(0, idcode, 1, sizeof(idcode), 0); -#endif - - /* Validate params from spi_flash_params table */ - flash = spi_flash_validate_params(spi, idcode); - if (!flash) - goto err_read_id; - -#ifdef CONFIG_OF_CONTROL - if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { - debug("SF: FDT decode error\n"); - goto err_read_id; - } -#endif -#ifndef CONFIG_SPL_BUILD - printf("SF: Detected %s with page size ", flash->name); - print_size(flash->page_size, ", erase size "); - print_size(flash->erase_size, ", total "); - print_size(flash->size, ""); - if (flash->memory_map) - printf(", mapped at %p", flash->memory_map); - puts("\n"); -#endif -#ifndef CONFIG_SPI_FLASH_BAR - if (flash->size > SPI_FLASH_16MB_BOUN) { - puts("SF: Warning - Only lower 16MiB accessible,"); - puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); - } -#endif - - /* Release spi bus */ - spi_release_bus(spi); - - return flash; - -err_read_id: - spi_release_bus(spi); -err_claim_bus: - spi_free_slave(spi); - return NULL; -} - -void spi_flash_free(struct spi_flash *flash) -{ - spi_free_slave(flash->spi); - free(flash); -} -- cgit v1.1