From 79b4c08fc42cd7f6b51183b5338f337116c6fdf3 Mon Sep 17 00:00:00 2001 From: Haikun Wang Date: Fri, 26 Jun 2015 19:30:27 +0800 Subject: dm: sf: Add Atmel DataFlash spi flash driver Atmel DataFlash chips have commands different from common spi flash commands. Atmel DataFlash also have special page-size. This driver add support for accessing Atmel DataFlash. It is based on the Driver Model. Example: => sf probe 1:0 SPI DataFlash: Detected AT45DB021B with page size 264 Bytes, erase size 264 Bytes, total 264 KiB, revision d => sf erase 0 42000 SF: 270336 bytes @ 0x0 Erased: OK => mw.l 82000000 45444342 20000 => sf write 82000000 0 42000 SF: 270336 bytes @ 0x0 Written: OK => sf read 83000000 0 42000 SF: 270336 bytes @ 0x0 Read: OK => cmp.b 82000000 83000000 42000 Total of 270336 byte(s) were the same Signed-off-by: Haikun Wang Tested-by: Haikun Wang Reviewed-by: Simon Glass Reviewed-by: Chakra Divi Reviewed-by: Jagan Teki --- drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/sf_dataflash.c | 711 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 712 insertions(+) create mode 100644 drivers/mtd/spi/sf_dataflash.c (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index c61b784..87f20bc 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -15,6 +15,7 @@ endif #ifndef CONFIG_DM_SPI obj-$(CONFIG_SPI_FLASH) += sf_probe.o #endif +obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o obj-$(CONFIG_CMD_SF) += sf.o obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c new file mode 100644 index 0000000..d287db8 --- /dev/null +++ b/drivers/mtd/spi/sf_dataflash.c @@ -0,0 +1,711 @@ +/* + * + * Atmel DataFlash probing + * + * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc. + * Haikun Wang (haikun.wang@freescale.com) + * + * SPDX-License-Identifier: GPL-2.0+ +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sf_internal.h" + +/* + * DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in + * each chip, which may be used for double buffered I/O; but this driver + * doesn't (yet) use these for any kind of i/o overlap or prefetching. + * + * Sometimes DataFlash is packaged in MMC-format cards, although the + * MMC stack can't (yet?) distinguish between MMC and DataFlash + * protocols during enumeration. + */ + +/* reads can bypass the buffers */ +#define OP_READ_CONTINUOUS 0xE8 +#define OP_READ_PAGE 0xD2 + +/* group B requests can run even while status reports "busy" */ +#define OP_READ_STATUS 0xD7 /* group B */ + +/* move data between host and buffer */ +#define OP_READ_BUFFER1 0xD4 /* group B */ +#define OP_READ_BUFFER2 0xD6 /* group B */ +#define OP_WRITE_BUFFER1 0x84 /* group B */ +#define OP_WRITE_BUFFER2 0x87 /* group B */ + +/* erasing flash */ +#define OP_ERASE_PAGE 0x81 +#define OP_ERASE_BLOCK 0x50 + +/* move data between buffer and flash */ +#define OP_TRANSFER_BUF1 0x53 +#define OP_TRANSFER_BUF2 0x55 +#define OP_MREAD_BUFFER1 0xD4 +#define OP_MREAD_BUFFER2 0xD6 +#define OP_MWERASE_BUFFER1 0x83 +#define OP_MWERASE_BUFFER2 0x86 +#define OP_MWRITE_BUFFER1 0x88 /* sector must be pre-erased */ +#define OP_MWRITE_BUFFER2 0x89 /* sector must be pre-erased */ + +/* write to buffer, then write-erase to flash */ +#define OP_PROGRAM_VIA_BUF1 0x82 +#define OP_PROGRAM_VIA_BUF2 0x85 + +/* compare buffer to flash */ +#define OP_COMPARE_BUF1 0x60 +#define OP_COMPARE_BUF2 0x61 + +/* read flash to buffer, then write-erase to flash */ +#define OP_REWRITE_VIA_BUF1 0x58 +#define OP_REWRITE_VIA_BUF2 0x59 + +/* + * newer chips report JEDEC manufacturer and device IDs; chip + * serial number and OTP bits; and per-sector writeprotect. + */ +#define OP_READ_ID 0x9F +#define OP_READ_SECURITY 0x77 +#define OP_WRITE_SECURITY_REVC 0x9A +#define OP_WRITE_SECURITY 0x9B /* revision D */ + + +struct dataflash { + uint8_t command[16]; + unsigned short page_offset; /* offset in flash address */ +}; + +/* + * Return the status of the DataFlash device. + */ +static inline int dataflash_status(struct spi_slave *spi) +{ + int ret; + u8 status; + /* + * NOTE: at45db321c over 25 MHz wants to write + * a dummy byte after the opcode... + */ + ret = spi_flash_cmd(spi, OP_READ_STATUS, &status, 1); + return ret ? -EIO : status; +} + +/* + * Poll the DataFlash device until it is READY. + * This usually takes 5-20 msec or so; more for sector erase. + * ready: return > 0 + */ +static int dataflash_waitready(struct spi_slave *spi) +{ + int status; + int timeout = 2 * CONFIG_SYS_HZ; + int timebase; + + timebase = get_timer(0); + do { + status = dataflash_status(spi); + if (status < 0) + status = 0; + + if (status & (1 << 7)) /* RDY/nBSY */ + return status; + + mdelay(3); + } while (get_timer(timebase) < timeout); + + return -ETIME; +} + +/* + * Erase pages of flash. + */ +static int spi_dataflash_erase(struct udevice *dev, u32 offset, size_t len) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + unsigned blocksize; + uint8_t *command; + uint32_t rem; + int status; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + blocksize = spi_flash->page_size << 3; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len); + + div_u64_rem(len, spi_flash->page_size, &rem); + if (rem) + return -EINVAL; + div_u64_rem(offset, spi_flash->page_size, &rem); + if (rem) + return -EINVAL; + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + while (len > 0) { + unsigned int pageaddr; + int do_block; + /* + * Calculate flash page address; use block erase (for speed) if + * we're at a block boundary and need to erase the whole block. + */ + pageaddr = div_u64(offset, spi_flash->page_size); + do_block = (pageaddr & 0x7) == 0 && len >= blocksize; + pageaddr = pageaddr << dataflash->page_offset; + + command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; + command[1] = (uint8_t)(pageaddr >> 16); + command[2] = (uint8_t)(pageaddr >> 8); + command[3] = 0; + + debug("%s ERASE %s: (%x) %x %x %x [%d]\n", + dev->name, do_block ? "block" : "page", + command[0], command[1], command[2], command[3], + pageaddr); + + status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + if (status < 0) { + debug("%s: erase send command error!\n", dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: erase waitready error!\n", dev->name); + return status; + } + + if (do_block) { + offset += blocksize; + len -= blocksize; + } else { + offset += spi_flash->page_size; + len -= spi_flash->page_size; + } + } + + spi_release_bus(spi); + + return 0; +} + +/* + * Read from the DataFlash device. + * offset : Start offset in flash device + * len : Amount to read + * buf : Buffer containing the data + */ +static int spi_dataflash_read(struct udevice *dev, u32 offset, size_t len, + void *buf) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + unsigned int addr; + uint8_t *command; + int status; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: erase addr=0x%x len 0x%x\n", dev->name, offset, len); + debug("READ: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + /* Calculate flash page/byte address */ + addr = (((unsigned)offset / spi_flash->page_size) + << dataflash->page_offset) + + ((unsigned)offset % spi_flash->page_size); + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + /* + * Continuous read, max clock = f(car) which may be less than + * the peak rate available. Some chips support commands with + * fewer "don't care" bytes. Both buffers stay unchanged. + */ + command[0] = OP_READ_CONTINUOUS; + command[1] = (uint8_t)(addr >> 16); + command[2] = (uint8_t)(addr >> 8); + command[3] = (uint8_t)(addr >> 0); + + /* plus 4 "don't care" bytes, command len: 4 + 4 "don't care" bytes */ + status = spi_flash_cmd_read(spi, command, 8, buf, len); + + spi_release_bus(spi); + + return status; +} + +/* + * Write to the DataFlash device. + * offset : Start offset in flash device + * len : Amount to write + * buf : Buffer containing the data + */ +int spi_dataflash_write(struct udevice *dev, u32 offset, size_t len, + const void *buf) +{ + struct dataflash *dataflash; + struct spi_flash *spi_flash; + struct spi_slave *spi; + uint8_t *command; + unsigned int pageaddr, addr, to, writelen; + size_t remaining = len; + u_char *writebuf = (u_char *)buf; + int status = -EINVAL; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + spi = spi_flash->spi; + + memset(dataflash->command, 0 , sizeof(dataflash->command)); + command = dataflash->command; + + debug("%s: write 0x%x..0x%x\n", dev->name, offset, (offset + len)); + + pageaddr = ((unsigned)offset / spi_flash->page_size); + to = ((unsigned)offset % spi_flash->page_size); + if (to + len > spi_flash->page_size) + writelen = spi_flash->page_size - to; + else + writelen = len; + + status = spi_claim_bus(spi); + if (status) { + debug("SPI DATAFLASH: unable to claim SPI bus\n"); + return status; + } + + while (remaining > 0) { + debug("write @ %d:%d len=%d\n", pageaddr, to, writelen); + + /* + * REVISIT: + * (a) each page in a sector must be rewritten at least + * once every 10K sibling erase/program operations. + * (b) for pages that are already erased, we could + * use WRITE+MWRITE not PROGRAM for ~30% speedup. + * (c) WRITE to buffer could be done while waiting for + * a previous MWRITE/MWERASE to complete ... + * (d) error handling here seems to be mostly missing. + * + * Two persistent bits per page, plus a per-sector counter, + * could support (a) and (b) ... we might consider using + * the second half of sector zero, which is just one block, + * to track that state. (On AT91, that sector should also + * support boot-from-DataFlash.) + */ + + addr = pageaddr << dataflash->page_offset; + + /* (1) Maybe transfer partial page to Buffer1 */ + if (writelen != spi_flash->page_size) { + command[0] = OP_TRANSFER_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + debug("TRANSFER: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, 4, NULL, 0); + if (status < 0) { + debug("%s: write(name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: write(name); + return status; + } + } + + /* (2) Program full page via Buffer1 */ + addr += to; + command[0] = OP_PROGRAM_VIA_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = (addr & 0x000000FF); + + debug("PROGRAM: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, + 4, writebuf, writelen); + if (status < 0) { + debug("%s: write send command error!\n", dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + if (status < 0) { + debug("%s: write waitready error!\n", dev->name); + return status; + } + +#ifdef CONFIG_SPI_DATAFLASH_WRITE_VERIFY + /* (3) Compare to Buffer1 */ + addr = pageaddr << dataflash->page_offset; + command[0] = OP_COMPARE_BUF1; + command[1] = (addr & 0x00FF0000) >> 16; + command[2] = (addr & 0x0000FF00) >> 8; + command[3] = 0; + + debug("COMPARE: (%x) %x %x %x\n", + command[0], command[1], command[2], command[3]); + + status = spi_flash_cmd_write(spi, command, + 4, writebuf, writelen); + if (status < 0) { + debug("%s: write(compare) send command error!\n", + dev->name); + return -EIO; + } + + status = dataflash_waitready(spi); + + /* Check result of the compare operation */ + if (status & (1 << 6)) { + printf("SPI DataFlash: write compare page %u, err %d\n", + pageaddr, status); + remaining = 0; + status = -EIO; + break; + } else { + status = 0; + } + +#endif /* CONFIG_SPI_DATAFLASH_WRITE_VERIFY */ + remaining = remaining - writelen; + pageaddr++; + to = 0; + writebuf += writelen; + + if (remaining > spi_flash->page_size) + writelen = spi_flash->page_size; + else + writelen = remaining; + } + + spi_release_bus(spi); + + return 0; +} + +static int add_dataflash(struct udevice *dev, char *name, int nr_pages, + int pagesize, int pageoffset, char revision) +{ + struct spi_flash *spi_flash; + struct dataflash *dataflash; + + dataflash = dev_get_priv(dev); + spi_flash = dev_get_uclass_priv(dev); + + dataflash->page_offset = pageoffset; + + spi_flash->name = name; + spi_flash->page_size = pagesize; + spi_flash->size = nr_pages * pagesize; + spi_flash->erase_size = pagesize; + +#ifndef CONFIG_SPL_BUILD + printf("SPI DataFlash: Detected %s with page size ", spi_flash->name); + print_size(spi_flash->page_size, ", erase size "); + print_size(spi_flash->erase_size, ", total "); + print_size(spi_flash->size, ""); + printf(", revision %c", revision); + puts("\n"); +#endif + + return 0; +} + +struct flash_info { + char *name; + + /* + * JEDEC id has a high byte of zero plus three data bytes: + * the manufacturer id, then a two byte device id. + */ + uint32_t jedec_id; + + /* The size listed here is what works with OP_ERASE_PAGE. */ + unsigned nr_pages; + uint16_t pagesize; + uint16_t pageoffset; + + uint16_t flags; +#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ +#define IS_POW2PS 0x0001 /* uses 2^N byte pages */ +}; + +static struct flash_info dataflash_data[] = { + /* + * NOTE: chips with SUP_POW2PS (rev D and up) need two entries, + * one with IS_POW2PS and the other without. The entry with the + * non-2^N byte page size can't name exact chip revisions without + * losing backwards compatibility for cmdlinepart. + * + * Those two entries have different name spelling format in order to + * show their difference obviously. + * The upper case refer to the chip isn't in normal 2^N bytes page-size + * mode. + * The lower case refer to the chip is in normal 2^N bytes page-size + * mode. + * + * These newer chips also support 128-byte security registers (with + * 64 bytes one-time-programmable) and software write-protection. + */ + { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */ + + { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, + + { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, +}; + +static struct flash_info *jedec_probe(struct spi_slave *spi, u8 *id) +{ + int tmp; + uint32_t jedec; + struct flash_info *info; + int status; + + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. + */ + if (id[0] != 0x1f) + return NULL; + + jedec = id[0]; + jedec = jedec << 8; + jedec |= id[1]; + jedec = jedec << 8; + jedec |= id[2]; + + for (tmp = 0, info = dataflash_data; + tmp < ARRAY_SIZE(dataflash_data); + tmp++, info++) { + if (info->jedec_id == jedec) { + if (info->flags & SUP_POW2PS) { + status = dataflash_status(spi); + if (status < 0) { + debug("SPI DataFlash: status error %d\n", + status); + return NULL; + } + if (status & 0x1) { + if (info->flags & IS_POW2PS) + return info; + } else { + if (!(info->flags & IS_POW2PS)) + return info; + } + } else { + return info; + } + } + } + + /* + * Treat other chips as errors ... we won't know the right page + * size (it might be binary) even when we can tell which density + * class is involved (legacy chip id scheme). + */ + printf("SPI DataFlash: Unsupported flash IDs: "); + printf("manuf %02x, jedec %04x, ext_jedec %04x\n", + id[0], jedec, id[3] << 8 | id[4]); + return NULL; +} + +/* + * Detect and initialize DataFlash device, using JEDEC IDs on newer chips + * or else the ID code embedded in the status bits: + * + * Device Density ID code #Pages PageSize Offset + * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 + * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 + * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 + * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 + * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 + * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 + * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 + */ +static int spi_dataflash_probe(struct udevice *dev) +{ + struct spi_slave *spi = dev_get_parentdata(dev); + struct spi_flash *spi_flash; + struct flash_info *info; + u8 idcode[5]; + int ret, status = 0; + + spi_flash = dev_get_uclass_priv(dev); + spi_flash->dev = dev; + + ret = spi_claim_bus(spi); + if (ret) + return ret; + + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) { + printf("SPI DataFlash: Failed to get idcodes\n"); + goto err_read_cmd; + } + + /* + * Try to detect dataflash by JEDEC ID. + * If it succeeds we know we have either a C or D part. + * D will support power of 2 pagesize option. + * Both support the security register, though with different + * write procedures. + */ + info = jedec_probe(spi, idcode); + if (info != NULL) + add_dataflash(dev, info->name, info->nr_pages, + info->pagesize, info->pageoffset, + (info->flags & SUP_POW2PS) ? 'd' : 'c'); + else { + /* + * Older chips support only legacy commands, identifing + * capacity using bits in the status byte. + */ + status = dataflash_status(spi); + if (status <= 0 || status == 0xff) { + printf("SPI DataFlash: read status error %d\n", status); + if (status == 0 || status == 0xff) + status = -ENODEV; + goto err_read_cmd; + } + /* + * if there's a device there, assume it's dataflash. + * board setup should have set spi->max_speed_max to + * match f(car) for continuous reads, mode 0 or 3. + */ + switch (status & 0x3c) { + case 0x0c: /* 0 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB011B", + 512, 264, 9, 0); + break; + case 0x14: /* 0 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB021B", + 1024, 264, 9, 0); + break; + case 0x1c: /* 0 1 1 1 x x */ + status = add_dataflash(dev, "AT45DB041x", + 2048, 264, 9, 0); + break; + case 0x24: /* 1 0 0 1 x x */ + status = add_dataflash(dev, "AT45DB081B", + 4096, 264, 9, 0); + break; + case 0x2c: /* 1 0 1 1 x x */ + status = add_dataflash(dev, "AT45DB161x", + 4096, 528, 10, 0); + break; + case 0x34: /* 1 1 0 1 x x */ + status = add_dataflash(dev, "AT45DB321x", + 8192, 528, 10, 0); + break; + case 0x38: /* 1 1 1 x x x */ + case 0x3c: + status = add_dataflash(dev, "AT45DB642x", + 8192, 1056, 11, 0); + break; + /* obsolete AT45DB1282 not (yet?) supported */ + default: + dev_info(&spi->dev, "unsupported device (%x)\n", + status & 0x3c); + status = -ENODEV; + goto err_read_cmd; + } + } + + /* Assign spi data */ + spi_flash->spi = spi; + spi_flash->memory_map = spi->memory_map; + spi_flash->dual_flash = spi->option; + + spi_release_bus(spi); + + return 0; + +err_read_cmd: + spi_release_bus(spi); + + return status; +} + +static const struct dm_spi_flash_ops spi_dataflash_ops = { + .read = spi_dataflash_read, + .write = spi_dataflash_write, + .erase = spi_dataflash_erase, +}; + +static const struct udevice_id spi_dataflash_ids[] = { + { .compatible = "atmel,at45", }, + { .compatible = "atmel,dataflash", }, + { } +}; + +U_BOOT_DRIVER(spi_dataflash) = { + .name = "spi_dataflash", + .id = UCLASS_SPI_FLASH, + .of_match = spi_dataflash_ids, + .probe = spi_dataflash_probe, + .priv_auto_alloc_size = sizeof(struct dataflash), + .ops = &spi_dataflash_ops, +}; -- cgit v1.1