From 6822a647b94cb05869231251e5a29f9742bb3ce2 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Fri, 17 Aug 2012 15:36:40 -0500 Subject: cfi: Check for blank before erase Added an optional check in the CFI driver to evaluate if the sector is already blank before issuing an erase command. Improves erase time by over a factor of 10 if already blank. Signed-off-by: Joe Hershberger Signed-off-by: Stefan Roese --- drivers/mtd/cfi_flash.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/mtd') diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f0f301a..97a4fd7 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1078,6 +1078,32 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) for (sect = s_first; sect <= s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ +#ifdef CONFIG_SYS_FLASH_CHECK_BLANK_BEFORE_ERASE + int k; + int size; + int erased; + u32 *flash; + + /* + * Check if whole sector is erased + */ + size = flash_sector_size(info, sect); + erased = 1; + flash = (u32 *)info->start[sect]; + /* divide by 4 for longword access */ + size = size >> 2; + for (k = 0; k < size; k++) { + if (flash_read32(flash++) != 0xffffffff) { + erased = 0; + break; + } + } + if (erased) { + if (flash_verbose) + putc(','); + continue; + } +#endif switch (info->vendor) { case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_STANDARD: -- cgit v1.1 From de15a06aad1f221255366ac07238c80fed146da1 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Fri, 17 Aug 2012 15:36:41 -0500 Subject: cfi: Make the flash erase and write operations abortable Check for ctrlc() in operations that take time and loop over the flash addresses. In netconsole, tstc() is expensive. Only check once in a while to not slow down the operation significantly. Signed-off-by: Joe Hershberger Signed-off-by: Stefan Roese --- drivers/mtd/cfi_flash.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/mtd') diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 97a4fd7..43140f3 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1077,6 +1077,11 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) for (sect = s_first; sect <= s_last; sect++) { + if (ctrlc()) { + printf("\n"); + return 1; + } + if (info->protect[sect] == 0) { /* not protected */ #ifdef CONFIG_SYS_FLASH_CHECK_BLANK_BEFORE_ERASE int k; @@ -1379,6 +1384,9 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) src += i; cnt -= i; FLASH_SHOW_PROGRESS(scale, dots, digit, i); + /* Only check every once in a while */ + if ((cnt & 0xFFFF) < buffered_size && ctrlc()) + return ERR_ABORTED; } #else while (cnt >= info->portwidth) { @@ -1391,6 +1399,9 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) wp += info->portwidth; cnt -= info->portwidth; FLASH_SHOW_PROGRESS(scale, dots, digit, info->portwidth); + /* Only check every once in a while */ + if ((cnt & 0xFFFF) < info->portwidth && ctrlc()) + return ERR_ABORTED; } #endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ -- cgit v1.1 From d62e9caaaf7e6f5c7d86c9ea19170bfa5adda8be Mon Sep 17 00:00:00 2001 From: Matthieu CASTET Date: Mon, 19 Mar 2012 15:35:25 +0100 Subject: mtd: support ONFI multi lun NAND With onfi a flash is organized into one or more logical units (LUNs). A logical unit (LUN) is the minimum unit that can independently execute commands and report status. Mtd does not exploit LUN, so make it see a big single flash where size is lun_size * number_of_lun. Without this patch MT29F8G08ADBDAH4 size is 512MiB instead of 1GiB. Artem: split long line on 2 shorter ones. This is commit 637957551c0ac80de8dfc7650d320c5a98c2c0c0 from Linux Signed-off-by: Matthieu Castet Acked-by: Florian Fainelli Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse [scottwood@freescale.com: picked from Linux into U-Boot] Reported-by: Rafael Beims Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index bfd668f..50bfb65 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2573,7 +2573,8 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, mtd->writesize = le32_to_cpu(p->byte_per_page); mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; + chip->chipsize = le32_to_cpu(p->blocks_per_lun); + chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count; *busw = 0; if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; -- cgit v1.1 From eee623a5049963d0c085be37128bbd22bee1ba1e Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Wed, 22 Aug 2012 16:49:42 -0500 Subject: nand: Add support for unlock.invert NAND unlock command allows an invert bit to be set to unlock all but the selected page range. Signed-off-by: Joe Hershberger [scottwood@freescale.com: updated docs and added comment about invert bit] Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_util.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 7ed8b18..c66eeef 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -317,18 +317,20 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) * @param start start byte address * @param length number of bytes to unlock (must be a multiple of * page size nand->writesize) + * @param allexcept if set, unlock everything not selected * * @return 0 on success, -1 in case of error */ -int nand_unlock(struct mtd_info *mtd, ulong start, ulong length) +int nand_unlock(struct mtd_info *mtd, ulong start, ulong length, int allexcept) { int ret = 0; int chipnr; int status; int page; struct nand_chip *chip = mtd->priv; - printf ("nand_unlock: start: %08x, length: %d!\n", - (int)start, (int)length); + + debug("nand_unlock%s: start: %08x, length: %d!\n", + allexcept ? " (allexcept)" : "", start, length); /* select the NAND device */ chipnr = (int)(start >> chip->chip_shift); @@ -368,6 +370,15 @@ int nand_unlock(struct mtd_info *mtd, ulong start, ulong length) /* submit ADDRESS of LAST page to unlock */ page += (int)(length >> chip->page_shift); + + /* + * Page addresses for unlocking are supposed to be block-aligned. + * At least some NAND chips use the low bit to indicate that the + * page range should be inverted. + */ + if (allexcept) + page |= 1; + chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1, page & chip->pagemask); /* call wait ready function */ -- cgit v1.1 From e331ab2ee9b141f1de2a8fb0bfaf52f6273022f9 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Wed, 22 Aug 2012 16:49:43 -0500 Subject: nand: Change ulong to loff_t and size_t Missed in previous cleanup. Signed-off-by: Joe Hershberger Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_util.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index c66eeef..5ef7df7 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -321,7 +321,8 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) * * @return 0 on success, -1 in case of error */ -int nand_unlock(struct mtd_info *mtd, ulong start, ulong length, int allexcept) +int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, + int allexcept) { int ret = 0; int chipnr; @@ -329,7 +330,7 @@ int nand_unlock(struct mtd_info *mtd, ulong start, ulong length, int allexcept) int page; struct nand_chip *chip = mtd->priv; - debug("nand_unlock%s: start: %08x, length: %d!\n", + debug("nand_unlock%s: start: %08llx, length: %d!\n", allexcept ? " (allexcept)" : "", start, length); /* select the NAND device */ -- cgit v1.1 From 33b1d5cae3defdbeb30333ffac41bcbff85c5019 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Wed, 22 Aug 2012 16:49:44 -0500 Subject: nand: consolidate duplicated constants NAND_CMD_ constants for lock/unlock should be in the header Signed-off-by: Joe Hershberger Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_util.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 5ef7df7..ffcb4f6 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -207,12 +207,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) * Support for locking / unlocking operations of some NAND devices *****************************************************************************/ -#define NAND_CMD_LOCK 0x2a -#define NAND_CMD_LOCK_TIGHT 0x2c -#define NAND_CMD_UNLOCK1 0x23 -#define NAND_CMD_UNLOCK2 0x24 -#define NAND_CMD_LOCK_STATUS 0x7a - /** * nand_lock: Set all pages of NAND flash chip to the LOCK or LOCK-TIGHT * state -- cgit v1.1 From e70bfa2986f9c028e3c21e0995285047a9baec27 Mon Sep 17 00:00:00 2001 From: Joe Hershberger Date: Wed, 22 Aug 2012 16:49:45 -0500 Subject: nand: Make NAND lock status compatible with Micron Micron NAND flash (e.g. MT29F4G08ABADAH4) BLOCK LOCK READ STATUS is not the same as others. Instead of bit 1 being lock, it is #lock_tight. To make the driver support either format, ignore bit 1 and use only bit 0 and bit 2. Signed-off-by: Joe Hershberger Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_util.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index ffcb4f6..c4752a7 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -265,7 +265,6 @@ int nand_lock(struct mtd_info *mtd, int tight) * >0 lock status: * bitfield with the following combinations: * NAND_LOCK_STATUS_TIGHT: page in tight state - * NAND_LOCK_STATUS_LOCK: page locked * NAND_LOCK_STATUS_UNLOCK: page unlocked * */ @@ -294,7 +293,6 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset) chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask); ret = chip->read_byte(mtd) & (NAND_LOCK_STATUS_TIGHT - | NAND_LOCK_STATUS_LOCK | NAND_LOCK_STATUS_UNLOCK); out: -- cgit v1.1 From 9c790a748f6b61e36f7aaf0c8d5ed35c9b09f454 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 30 Aug 2012 13:39:38 +0000 Subject: mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver This is based on Linux kernel -next: commit 14f44abf1dafc20ba42ce8616a8fc8fbd1b3712b Author: Brian Norris Date: Fri Jul 13 09:28:24 2012 -0700 mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Marek Vasut Cc: Brian Norris Cc: Eric Nelson Cc: Fabio Estevam Cc: Otavio Salvador Cc: Scott Wood Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_base.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 50bfb65..390ff90 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2579,9 +2579,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; - chip->options &= ~NAND_CHIPOPTIONS_MSK; - chip->options |= (NAND_NO_READRDY | - NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK; + chip->options |= NAND_NO_READRDY | NAND_NO_AUTOINCR; return 1; } @@ -2753,8 +2751,7 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, } } /* Get chip options, preserve non chip based options */ - chip->options &= ~NAND_CHIPOPTIONS_MSK; - chip->options |= type->options & NAND_CHIPOPTIONS_MSK; + chip->options |= type->options; /* Check if chip is a not a samsung device. Do not clear the * options for chips which are not having an extended id. -- cgit v1.1 From 80c8ab7b25579529809792eef51fe660308fecb6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:48:12 +0200 Subject: mxc nand: Merge mtd and spl register definitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patches fixes the TODO to use same register definitions in mtd mxc_nand and nand_spl fsl nfc drivers. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 247 +++++++++----------------------------------- 1 file changed, 51 insertions(+), 196 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 936186f..9a9260c 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -25,168 +25,23 @@ #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) #include #endif +#include #define DRIVER_NAME "mxc_nand" -/* - * TODO: Use same register defs here as nand_spl mxc nand driver. - */ -/* - * Register map and bit definitions for the Freescale NAND Flash Controller - * present in various i.MX devices. - * - * MX31 and MX27 have version 1 which has - * 4 512 byte main buffers and - * 4 16 byte spare buffers - * to support up to 2K byte pagesize nand. - * Reading or writing a 2K page requires 4 FDI/FDO cycles. - * - * MX25 has version 1.1 which has - * 8 512 byte main buffers and - * 8 64 byte spare buffers - * to support up to 4K byte pagesize nand. - * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle. - * Also some of registers are moved and/or changed meaning as seen below. - */ -#if defined(CONFIG_MX31) || defined(CONFIG_MX27) -#define MXC_NFC_V1 -#elif defined(CONFIG_MX25) || defined(CONFIG_MX35) -#define MXC_NFC_V1_1 -#else -#warning "MXC NFC version not defined" -#endif - -#if defined(MXC_NFC_V1) -#define NAND_MXC_NR_BUFS 4 -#define NAND_MXC_SPARE_BUF_SIZE 16 -#define NAND_MXC_REG_OFFSET 0xe00 -#define is_mxc_nfc_11() 0 -#elif defined(MXC_NFC_V1_1) -#define NAND_MXC_NR_BUFS 8 -#define NAND_MXC_SPARE_BUF_SIZE 64 -#define NAND_MXC_REG_OFFSET 0x1e00 -#define is_mxc_nfc_11() 1 -#else -#error "define CONFIG_NAND_MXC_VXXX to use mtd mxc nand driver" -#endif -struct nfc_regs { - uint8_t main_area[NAND_MXC_NR_BUFS][0x200]; - uint8_t spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE]; - /* - * reserved size is offset of nfc registers - * minus total main and spare sizes - */ - uint8_t reserved1[NAND_MXC_REG_OFFSET - - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)]; -#if defined(MXC_NFC_V1) - uint16_t nfc_buf_size; - uint16_t reserved2; - uint16_t nfc_buf_addr; - uint16_t nfc_flash_addr; - uint16_t nfc_flash_cmd; - uint16_t nfc_config; - uint16_t nfc_ecc_status_result; - uint16_t nfc_rsltmain_area; - uint16_t nfc_rsltspare_area; - uint16_t nfc_wrprot; - uint16_t nfc_unlockstart_blkaddr; - uint16_t nfc_unlockend_blkaddr; - uint16_t nfc_nf_wrprst; - uint16_t nfc_config1; - uint16_t nfc_config2; -#elif defined(MXC_NFC_V1_1) - uint16_t reserved2[2]; - uint16_t nfc_buf_addr; - uint16_t nfc_flash_addr; - uint16_t nfc_flash_cmd; - uint16_t nfc_config; - uint16_t nfc_ecc_status_result; - uint16_t nfc_ecc_status_result2; - uint16_t nfc_spare_area_size; - uint16_t nfc_wrprot; - uint16_t reserved3[2]; - uint16_t nfc_nf_wrprst; - uint16_t nfc_config1; - uint16_t nfc_config2; - uint16_t reserved4; - uint16_t nfc_unlockstart_blkaddr; - uint16_t nfc_unlockend_blkaddr; - uint16_t nfc_unlockstart_blkaddr1; - uint16_t nfc_unlockend_blkaddr1; - uint16_t nfc_unlockstart_blkaddr2; - uint16_t nfc_unlockend_blkaddr2; - uint16_t nfc_unlockstart_blkaddr3; - uint16_t nfc_unlockend_blkaddr3; -#endif -}; - -/* - * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register - * for Command operation - */ -#define NFC_CMD 0x1 - -/* - * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register - * for Address operation - */ -#define NFC_ADDR 0x2 - -/* - * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register - * for Input operation - */ -#define NFC_INPUT 0x4 - -/* - * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register - * for Data Output operation - */ -#define NFC_OUTPUT 0x8 - -/* - * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register - * for Read ID operation - */ -#define NFC_ID 0x10 - -/* - * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register - * for Read Status operation - */ -#define NFC_STATUS 0x20 - -/* - * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read - * Status operation - */ -#define NFC_INT 0x8000 - -#ifdef MXC_NFC_V1_1 -#define NFC_4_8N_ECC (1 << 0) -#else -#define NFC_4_8N_ECC 0 -#endif -#define NFC_SP_EN (1 << 2) -#define NFC_ECC_EN (1 << 3) -#define NFC_BIG (1 << 5) -#define NFC_RST (1 << 6) -#define NFC_CE (1 << 7) -#define NFC_ONE_CYCLE (1 << 8) - typedef enum {false, true} bool; struct mxc_nand_host { - struct mtd_info mtd; - struct nand_chip *nand; - - struct nfc_regs __iomem *regs; - int spare_only; - int status_request; - int pagesize_2k; - int clk_act; - uint16_t col_addr; - unsigned int page_addr; + struct mtd_info mtd; + struct nand_chip *nand; + + struct fsl_nfc_regs __iomem *regs; + int spare_only; + int status_request; + int pagesize_2k; + int clk_act; + uint16_t col_addr; + unsigned int page_addr; }; static struct mxc_nand_host mxc_host; @@ -304,10 +159,10 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries, uint32_t tmp; while (max_retries-- > 0) { - if (readw(&host->regs->nfc_config2) & NFC_INT) { - tmp = readw(&host->regs->nfc_config2); + if (readw(&host->regs->config2) & NFC_INT) { + tmp = readw(&host->regs->config2); tmp &= ~NFC_INT; - writew(tmp, &host->regs->nfc_config2); + writew(tmp, &host->regs->config2); break; } udelay(1); @@ -326,8 +181,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd); - writew(cmd, &host->regs->nfc_flash_cmd); - writew(NFC_CMD, &host->regs->nfc_config2); + writew(cmd, &host->regs->flash_cmd); + writew(NFC_CMD, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, cmd); @@ -342,8 +197,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr); - writew(addr, &host->regs->nfc_flash_addr); - writew(NFC_ADDR, &host->regs->nfc_config2); + writew(addr, &host->regs->flash_addr); + writew(NFC_ADDR, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, addr); @@ -375,19 +230,19 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } } - writew(buf_id, &host->regs->nfc_buf_addr); + writew(buf_id, &host->regs->buf_addr); /* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint16_t config1 = readw(&host->regs->nfc_config1); + uint16_t config1 = readw(&host->regs->config1); if (spare_only) config1 |= NFC_SP_EN; else config1 &= ~(NFC_SP_EN); - writew(config1, &host->regs->nfc_config1); + writew(config1, &host->regs->config1); } - writew(NFC_INPUT, &host->regs->nfc_config2); + writew(NFC_INPUT, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -402,19 +257,19 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, { MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only); - writew(buf_id, &host->regs->nfc_buf_addr); + writew(buf_id, &host->regs->buf_addr); /* Configure spare or page+spare access */ if (!host->pagesize_2k) { - uint32_t config1 = readw(&host->regs->nfc_config1); + uint32_t config1 = readw(&host->regs->config1); if (spare_only) config1 |= NFC_SP_EN; else config1 &= ~NFC_SP_EN; - writew(config1, &host->regs->nfc_config1); + writew(config1, &host->regs->config1); } - writew(NFC_OUTPUT, &host->regs->nfc_config2); + writew(NFC_OUTPUT, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); @@ -442,14 +297,14 @@ static void send_read_id(struct mxc_nand_host *host) uint16_t tmp; /* NANDFC buffer 0 is used for device ID output */ - writew(0x0, &host->regs->nfc_buf_addr); + writew(0x0, &host->regs->buf_addr); /* Read ID into main buffer */ - tmp = readw(&host->regs->nfc_config1); + tmp = readw(&host->regs->config1); tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); - writew(NFC_ID, &host->regs->nfc_config2); + writew(NFC_ID, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -469,14 +324,14 @@ static uint16_t get_dev_status(struct mxc_nand_host *host) /* store the main area1 first word, later do recovery */ store = readl(main_buf); /* NANDFC buffer 1 is used for device status */ - writew(1, &host->regs->nfc_buf_addr); + writew(1, &host->regs->buf_addr); /* Read status into main buffer */ - tmp = readw(&host->regs->nfc_config1); + tmp = readw(&host->regs->config1); tmp &= ~NFC_SP_EN; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); - writew(NFC_STATUS, &host->regs->nfc_config2); + writew(NFC_STATUS, &host->regs->config2); /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, 0); @@ -515,13 +370,13 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t tmp = readw(&host->regs->nfc_config1); + uint16_t tmp = readw(&host->regs->config1); if (on) tmp |= NFC_ECC_EN; else tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); } static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd, @@ -799,7 +654,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result); + uint16_t ecc_status = readw(&host->regs->ecc_status_result); int subpages = mtd->writesize / nand_chip->subpagesize; int pg2blk_shift = nand_chip->phys_erase_shift - nand_chip->page_shift; @@ -845,7 +700,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, * additional correction. 2-Bit errors cannot be corrected by * HW ECC, so we need to return failure */ - uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result); + uint16_t ecc_status = readw(&host->regs->ecc_status_result); if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) { MTDDEBUG(MTD_DEBUG_LEVEL0, @@ -1289,14 +1144,14 @@ static void mxc_setup_config1(void) { uint16_t tmp; - tmp = readw(&host->regs->nfc_config1); + tmp = readw(&host->regs->config1); tmp |= NFC_ONE_CYCLE; tmp |= NFC_4_8N_ECC; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); if (host->pagesize_2k) - writew(64/2, &host->regs->nfc_spare_area_size); + writew(64/2, &host->regs->spare_area_size); else - writew(16/2, &host->regs->nfc_spare_area_size); + writew(16/2, &host->regs->spare_area_size); } #else #define mxc_setup_config1() @@ -1359,7 +1214,7 @@ int board_nand_init(struct nand_chip *this) this->read_buf = mxc_nand_read_buf; this->verify_buf = mxc_nand_verify_buf; - host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; + host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; host->clk_act = 1; #ifdef CONFIG_MXC_NAND_HWECC @@ -1383,15 +1238,15 @@ int board_nand_init(struct nand_chip *this) host->pagesize_2k = 0; this->ecc.size = 512; - tmp = readw(&host->regs->nfc_config1); + tmp = readw(&host->regs->config1); tmp |= NFC_ECC_EN; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); #else this->ecc.layout = &nand_soft_eccoob; this->ecc.mode = NAND_ECC_SOFT; - tmp = readw(&host->regs->nfc_config1); + tmp = readw(&host->regs->config1); tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->nfc_config1); + writew(tmp, &host->regs->config1); #endif /* Reset NAND */ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); @@ -1400,10 +1255,10 @@ int board_nand_init(struct nand_chip *this) * preset operation * Unlock the internal RAM Buffer */ - writew(0x2, &host->regs->nfc_config); + writew(0x2, &host->regs->config); /* Blocks to be unlocked */ - writew(0x0, &host->regs->nfc_unlockstart_blkaddr); + writew(0x0, &host->regs->unlockstart_blkaddr); /* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the * unlockend_blkaddr, but the magic 0x4000 does not always work * when writing more than some 32 megabytes (on 2k page nands) @@ -1415,10 +1270,10 @@ int board_nand_init(struct nand_chip *this) * This might be NAND chip specific and the i.MX31 datasheet is * extremely vague about the semantics of this register. */ - writew(0xFFFF, &host->regs->nfc_unlockend_blkaddr); + writew(0xFFFF, &host->regs->unlockend_blkaddr); /* Unlock Block Command for given address range */ - writew(0x4, &host->regs->nfc_wrprot); + writew(0x4, &host->regs->wrprot); /* NAND bus width determines access functions used by upper layer */ if (is_16bit_nand()) -- cgit v1.1 From 365b2c0761040764953e659f3385840e33823807 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:48:26 +0200 Subject: mxc nand: cosmectic: Light cleanup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 9a9260c..62d8c6b 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -123,8 +123,7 @@ static int is_16bit_nand(void) #elif defined(CONFIG_MX25) || defined(CONFIG_MX35) static int is_16bit_nand(void) { - struct ccm_regs *ccm = - (struct ccm_regs *)IMX_CCM_BASE; + struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; if (readl(&ccm->rcsr) & CCM_RCSR_NF_16BIT_SEL) return 1; @@ -238,7 +237,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, if (spare_only) config1 |= NFC_SP_EN; else - config1 &= ~(NFC_SP_EN); + config1 &= ~NFC_SP_EN; writew(config1, &host->regs->config1); } @@ -687,7 +686,6 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, #define mxc_nand_write_page_syndrome NULL #define mxc_nand_write_page_raw_syndrome NULL #define mxc_nand_write_oob_syndrome NULL -#define mxc_nfc_11_nand_correct_data NULL static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) @@ -1188,7 +1186,6 @@ int board_nand_init(struct nand_chip *this) { struct mtd_info *mtd; uint16_t tmp; - int err = 0; #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT this->options |= NAND_USE_FLASH_BBT; @@ -1287,5 +1284,5 @@ int board_nand_init(struct nand_chip *this) this->ecc.layout = &nand_hw_eccoob; #endif mxc_setup_config1(); - return err; + return 0; } -- cgit v1.1 From c1db8dd62b337372a08942e1c5945a8590afbc58 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:49:42 +0200 Subject: mxc nand: Access all ecc_status_result fields MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On the NFC IP 1.1, the 32-bit ecc_status_result value comes from 2 consecutive 16-bit registers. This patch reads all the fields of this value, which makes a difference for 4-kiB NF pages. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 62d8c6b..4564b25 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -653,7 +653,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat, { struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - uint16_t ecc_status = readw(&host->regs->ecc_status_result); + uint32_t ecc_status = readl(&host->regs->ecc_status_result); int subpages = mtd->writesize / nand_chip->subpagesize; int pg2blk_shift = nand_chip->phys_erase_shift - nand_chip->page_shift; -- cgit v1.1 From 0e499b07ef417b153e3feb54c249d56edbc364b4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:50:07 +0200 Subject: mtd mxc nand: Use _mxc_nand_enable_hwecc() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use _mxc_nand_enable_hwecc() instead of duplicating its code. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 4564b25..7a180e1 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -355,16 +355,6 @@ static int mxc_nand_dev_ready(struct mtd_info *mtd) return 1; } -#ifdef CONFIG_MXC_NAND_HWECC -static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) -{ - /* - * If HW ECC is enabled, we turn it on during init. There is - * no need to enable again here. - */ -} - -#ifdef MXC_NFC_V1_1 static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) { struct nand_chip *nand_chip = mtd->priv; @@ -378,6 +368,16 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on) writew(tmp, &host->regs->config1); } +#ifdef CONFIG_MXC_NAND_HWECC +static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + /* + * If HW ECC is enabled, we turn it on during init. There is + * no need to enable again here. + */ +} + +#ifdef MXC_NFC_V1_1 static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) @@ -1235,15 +1235,11 @@ int board_nand_init(struct nand_chip *this) host->pagesize_2k = 0; this->ecc.size = 512; - tmp = readw(&host->regs->config1); - tmp |= NFC_ECC_EN; - writew(tmp, &host->regs->config1); + _mxc_nand_enable_hwecc(mtd, 1); #else this->ecc.layout = &nand_soft_eccoob; this->ecc.mode = NAND_ECC_SOFT; - tmp = readw(&host->regs->config1); - tmp &= ~NFC_ECC_EN; - writew(tmp, &host->regs->config1); + _mxc_nand_enable_hwecc(mtd, 0); #endif /* Reset NAND */ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); -- cgit v1.1 From 7c28a1cfdf5e919f2a09abb644f614f1b67d3322 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:50:19 +0200 Subject: mtd mxc nand: Fix ECC state after read_page_raw_syndrome() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit mxc_nand_read_page_raw_syndrome() should reenable ECC upon exit. This fixes ECC errors left uncorrected after a call to this function. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 7a180e1..2ae41dc 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -470,7 +470,7 @@ static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd, size = mtd->oobsize - (oob - chip->oob_poi); if (size) chip->read_buf(mtd, oob, size); - _mxc_nand_enable_hwecc(mtd, 0); + _mxc_nand_enable_hwecc(mtd, 1); return 0; } -- cgit v1.1 From 13927f07334ce47a975c2e2a5bcd6bb708692534 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:50:30 +0200 Subject: mtd mxc nand: Merge init functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Merge mxc_setup_config1() into board_nand_init() in order to ease the addition of i.MX5 support in the following patches. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 53 ++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 30 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 2ae41dc..e743796 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1137,24 +1137,6 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, } } -#ifdef MXC_NFC_V1_1 -static void mxc_setup_config1(void) -{ - uint16_t tmp; - - tmp = readw(&host->regs->config1); - tmp |= NFC_ONE_CYCLE; - tmp |= NFC_4_8N_ECC; - writew(tmp, &host->regs->config1); - if (host->pagesize_2k) - writew(64/2, &host->regs->spare_area_size); - else - writew(16/2, &host->regs->spare_area_size); -} -#else -#define mxc_setup_config1() -#endif - #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; @@ -1244,6 +1226,29 @@ int board_nand_init(struct nand_chip *this) /* Reset NAND */ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + /* NAND bus width determines access functions used by upper layer */ + if (is_16bit_nand()) + this->options |= NAND_BUSWIDTH_16; + +#ifdef CONFIG_SYS_NAND_LARGEPAGE + host->pagesize_2k = 1; + this->ecc.layout = &nand_hw_eccoob2k; +#else + host->pagesize_2k = 0; + this->ecc.layout = &nand_hw_eccoob; +#endif + +#ifdef MXC_NFC_V1_1 + tmp = readw(&host->regs->config1); + tmp |= NFC_ONE_CYCLE; + tmp |= NFC_4_8N_ECC; + writew(tmp, &host->regs->config1); + if (host->pagesize_2k) + writew(64/2, &host->regs->spare_area_size); + else + writew(16/2, &host->regs->spare_area_size); +#endif + /* * preset operation * Unlock the internal RAM Buffer @@ -1268,17 +1273,5 @@ int board_nand_init(struct nand_chip *this) /* Unlock Block Command for given address range */ writew(0x4, &host->regs->wrprot); - /* NAND bus width determines access functions used by upper layer */ - if (is_16bit_nand()) - this->options |= NAND_BUSWIDTH_16; - -#ifdef CONFIG_SYS_NAND_LARGEPAGE - host->pagesize_2k = 1; - this->ecc.layout = &nand_hw_eccoob2k; -#else - host->pagesize_2k = 0; - this->ecc.layout = &nand_hw_eccoob; -#endif - mxc_setup_config1(); return 0; } -- cgit v1.1 From 9c60e75e05dab5a0197728b6a940aaac02762936 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Mon, 13 Aug 2012 22:50:53 +0200 Subject: mxc nand: Homogenize IP revisions with Linux MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the same IP revisions as in Linux in order to make the comparison more clear. Signed-off-by: Benoît Thébaudeau Cc: Scott Wood Cc: Stefano Babic Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index e743796..cf2a7b0 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -77,7 +77,7 @@ static struct nand_ecclayout nand_hw_eccoob2k = { .oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} }, }; #endif -#elif defined(MXC_NFC_V1_1) +#elif defined(MXC_NFC_V2_1) #ifndef CONFIG_SYS_NAND_LARGEPAGE static struct nand_ecclayout nand_hw_eccoob = { .eccbytes = 9, @@ -213,7 +213,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, if (spare_only) MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only); - if (is_mxc_nfc_11()) { + if (is_mxc_nfc_21()) { int i; /* * The controller copies the 64 bytes of spare data from @@ -273,7 +273,7 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, /* Wait for operation to complete */ wait_op_done(host, TROP_US_DELAY, spare_only); - if (is_mxc_nfc_11()) { + if (is_mxc_nfc_21()) { int i; /* @@ -377,7 +377,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode) */ } -#ifdef MXC_NFC_V1_1 +#ifdef MXC_NFC_V2_1 static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page, int sndcmd) @@ -1061,7 +1061,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_PAGEPROG: send_prog_page(host, 0, host->spare_only); - if (host->pagesize_2k && !is_mxc_nfc_11()) { + if (host->pagesize_2k && is_mxc_nfc_1()) { /* data in 4 areas */ send_prog_page(host, 1, host->spare_only); send_prog_page(host, 2, host->spare_only); @@ -1111,7 +1111,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, send_cmd(host, NAND_CMD_READSTART); /* read for each AREA */ send_read_page(host, 0, host->spare_only); - if (!is_mxc_nfc_11()) { + if (is_mxc_nfc_1()) { send_read_page(host, 1, host->spare_only); send_read_page(host, 2, host->spare_only); send_read_page(host, 3, host->spare_only); @@ -1200,7 +1200,7 @@ int board_nand_init(struct nand_chip *this) this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; this->ecc.correct = mxc_nand_correct_data; - if (is_mxc_nfc_11()) { + if (is_mxc_nfc_21()) { this->ecc.mode = NAND_ECC_HW_SYNDROME; this->ecc.read_page = mxc_nand_read_page_syndrome; this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome; @@ -1238,7 +1238,7 @@ int board_nand_init(struct nand_chip *this) this->ecc.layout = &nand_hw_eccoob; #endif -#ifdef MXC_NFC_V1_1 +#ifdef MXC_NFC_V2_1 tmp = readw(&host->regs->config1); tmp |= NFC_ONE_CYCLE; tmp |= NFC_4_8N_ECC; -- cgit v1.1 From efa1f43b7dbdc0ab4db103f472f2838adc6f7ba1 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 18 Sep 2012 09:24:22 -0700 Subject: mxc nand: Fix warning on !MXC_NFC_V2_1 In board_nand_init() we only need the 'tmp' variable if MXC_NFC_V2_1 is defined. Signed-off-by: Tom Rini --- drivers/mtd/nand/mxc_nand.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index cf2a7b0..d0ded48 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1167,7 +1167,9 @@ static struct nand_bbt_descr bbt_mirror_descr = { int board_nand_init(struct nand_chip *this) { struct mtd_info *mtd; +#ifdef MXC_NFC_V2_1 uint16_t tmp; +#endif #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT this->options |= NAND_USE_FLASH_BBT; -- cgit v1.1 From a4cc1c487757fe71ee13adead888c8010191c961 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 14 Aug 2012 14:34:10 -0700 Subject: SPL: SPI: Enhance spi_spl_load to match the other load functions Signed-off-by: Tom Rini --- drivers/mtd/spi/spi_spl_load.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 1aa30ac..d4f81f2 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -24,16 +24,17 @@ #include #include +#include /* * The main entry for SPI booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image * from SPI into SDRAM and starts it from there. */ -void spi_boot(void) +void spl_spi_load_image(void) { struct spi_flash *flash; - void (*uboot)(void) __noreturn; + struct image_header *header; /* * Load U-Boot image from SPI flash into RAM @@ -42,17 +43,17 @@ void spi_boot(void) flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS, CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3); if (!flash) { - puts("failed.\n"); + puts("SPI probe failed.\n"); hang(); } - spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, - CONFIG_SYS_SPI_U_BOOT_SIZE, - (void *) CONFIG_SYS_TEXT_BASE); + /* use CONFIG_SYS_TEXT_BASE as temporary storage area */ + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); - /* - * Jump to U-Boot image - */ - uboot = (void *) CONFIG_SYS_TEXT_BASE; - (*uboot)(); + /* Load u-boot, mkimage header is 64 bytes. */ + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, + (void *) header); + spl_parse_image_header(header); + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); } -- cgit v1.1