From 97f4eb8cfb97c7c5b158e3c0df4611efbf50f403 Mon Sep 17 00:00:00 2001 From: Nick Thompson Date: Sat, 12 Dec 2009 12:12:26 -0500 Subject: Davinci: Configurable NAND chip selects Davinci: Configurable NAND chip selects Add a CONFIG_SYS_NAND_CS setting to all davinci configs and use it to setup the NAND controller in the davinci_nand mtd driver. Signed-off-by: Nick Thompson --- drivers/mtd/nand/davinci_nand.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 41a9568..1ad802a 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -82,26 +82,20 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int c static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) { - int dummy; + u_int32_t val; - dummy = emif_regs->NANDF1ECC; + (void)readl(&(emif_regs->NANDFECC[CONFIG_SYS_NAND_CS - 2])); - /* FIXME: only chipselect 0 is supported for now */ - emif_regs->NANDFCR |= 1 << 8; + val = readl(&emif_regs->NANDFCR); + val |= DAVINCI_NANDFCR_1BIT_ECC_START(CONFIG_SYS_NAND_CS); + writel(val, &emif_regs->NANDFCR); } static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) { u_int32_t ecc = 0; - if (region == 1) - ecc = emif_regs->NANDF1ECC; - else if (region == 2) - ecc = emif_regs->NANDF2ECC; - else if (region == 3) - ecc = emif_regs->NANDF3ECC; - else if (region == 4) - ecc = emif_regs->NANDF4ECC; + ecc = readl(&(emif_regs->NANDFECC[region - 1])); return(ecc); } @@ -223,8 +217,11 @@ static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode) * Start a new ECC calculation for reading or writing 512 bytes * of data. */ - val = (emif_regs->NANDFCR & ~(3 << 4)) | (1 << 12); - emif_regs->NANDFCR = val; + val = readl(&emif_regs->NANDFCR); + val &= ~DAVINCI_NANDFCR_4BIT_ECC_SEL_MASK; + val |= DAVINCI_NANDFCR_4BIT_ECC_SEL(CONFIG_SYS_NAND_CS); + val |= DAVINCI_NANDFCR_4BIT_ECC_START; + writel(val, &emif_regs->NANDFCR); break; case NAND_ECC_READSYN: val = emif_regs->NAND4BITECC1; -- cgit v1.1