From 152ac5fabf05daf6b0ae28f04d540b1e005c3ea1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 4 May 2016 23:05:23 +0200 Subject: gpio: at91: Fix pullup/pulldown configuration on PIO3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On systems with PIO3 (SAMA5D3/D4/..), the pullup and pulldown configuration is mutualy exclusive. This patch assures that the opposite pull resistor gets disabled before the requested pull resistor is enabled. This changes behavior of at91_set_pio_pulldown() such that the pullup is only disabled if pulldown is to be enabled. This changes behavior of at91_set_pio_pullup() such that the pulldown is only disabled if pullup is to be enabled. Signed-off-by: Marek Vasut Cc: Andreas Bießmann Cc: Josh Wu Cc: Simon Glass Reviewed-by: Andreas Bießmann --- drivers/gpio/at91_gpio.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 75a32ee..8e52e3d 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -59,6 +59,11 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) { struct at91_port *at91_port = at91_pio_get_port(port); +#if defined(CPU_HAS_PIO3) + if (use_pullup) + at91_set_pio_pulldown(port, pin, 0); +#endif + if (at91_port && (pin < GPIO_PER_BANK)) at91_set_port_pullup(at91_port, pin, use_pullup); @@ -305,10 +310,10 @@ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) if (at91_port && (pin < GPIO_PER_BANK)) { mask = 1 << pin; - writel(mask, &at91_port->pudr); - if (is_on) + if (is_on) { + at91_set_pio_pullup(port, pin, 0); writel(mask, &at91_port->ppder); - else + } else writel(mask, &at91_port->ppddr); } -- cgit v1.1