From 766b16fe180087d8c59a79a4f6a92d1a500fa524 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Mon, 29 Oct 2012 05:24:02 +0000 Subject: ahci: Perform SATA flush after disk write. Writes in u-boot are so rare, and the logic to know when is the last write and do a flush only there is sufficiently difficult. Just do a flush after every write. This incurs, usually, one extra flush when the rare writes do happen. Signed-off-by: Marc Jones Signed-off-by: Simon Glass --- drivers/block/ahci.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) (limited to 'drivers/block/ahci.c') diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 19c5f13..963efec 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -37,6 +37,8 @@ #include #include +static int ata_io_flush(u8 port); + struct ahci_probe_ent *probe_ent = NULL; hd_driveid_t *ataid[AHCI_MAX_PORTS]; @@ -55,6 +57,7 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS]; /* Maximum timeouts for each event */ #define WAIT_MS_SPINUP 10000 #define WAIT_MS_DATAIO 5000 +#define WAIT_MS_FLUSH 5000 #define WAIT_MS_LINKUP 4 static inline u32 ahci_port_base(u32 base, u32 port) @@ -267,7 +270,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* register linkup ports */ tmp = readl(port_mmio + PORT_SCR_STAT); - debug("Port %d status: 0x%x\n", i, tmp); + debug("SATA port %d status: 0x%x\n", i, tmp); if ((tmp & 0xf) == 0x03) probe_ent->link_port_map |= (0x01 << i); } @@ -736,6 +739,17 @@ static int ata_scsiop_read_write(ccb *pccb, u8 is_write) is_write ? "WRITE" : "READ"); return -EIO; } + + /* If this transaction is a write, do a following flush. + * Writes in u-boot are so rare, and the logic to know when is + * the last write and do a flush only there is sufficiently + * difficult. Just do a flush after every write. This incurs, + * usually, one extra flush when the rare writes do happen. + */ + if (is_write) { + if (-EIO == ata_io_flush(pccb->target)) + return -EIO; + } user_buffer += transfer_size; user_buffer_size -= transfer_size; blocks -= now_blocks; @@ -929,6 +943,42 @@ err_out: } #endif +/* + * In the general case of generic rotating media it makes sense to have a + * flush capability. It probably even makes sense in the case of SSDs because + * one cannot always know for sure what kind of internal cache/flush mechanism + * is embodied therein. At first it was planned to invoke this after the last + * write to disk and before rebooting. In practice, knowing, a priori, which + * is the last write is difficult. Because writing to the disk in u-boot is + * very rare, this flush command will be invoked after every block write. + */ +static int ata_io_flush(u8 port) +{ + u8 fis[20]; + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + + /* Preset the FIS */ + memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_FLUSH; + + memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + ahci_fill_cmd_slot(pp, cmd_fis_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_FLUSH, 0x1)) { + debug("scsi_ahci: flush command timeout on port %d.\n", port); + return -EIO; + } + + return 0; +} + + void scsi_bus_reset(void) { /*Not implement*/ -- cgit v1.1