From c13dcb3dc7aeaf0a78daff0a3d28eaaa94ad1f28 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Fri, 11 Mar 2016 22:07:17 -0700 Subject: x86: dts: Update the pinctrl binding a little Make a few minor updates to make the meaning clearer. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'doc') diff --git a/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt index be5d51c..22d3bec 100644 --- a/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt +++ b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt @@ -8,17 +8,18 @@ The PINCTRL master node requires the following properties: Pin nodes must be children of the pinctrl master node and can contain the following properties: -- pad-offset - (required) offset in the IOBASE for the pin to configured. -- gpio-offset - (required) offset in the GPIOBASE for the pin to configured and - also the bit shift in this register. -- mode-gpio - (optional) standalone property to force the pin into GPIO mode. -- mode-func - (optional) function number to assign to the pin. if 'mode-gpio' - is set, this property will be ignored. +- pad-offset - (required) offset in the IOBASE for the pin to configure +- gpio-offset - (required) 2 cells + - offset in the GPIOBASE for the pin to configure + - the bit shift in this register (4 = bit 4) +- mode-gpio - (optional) standalone property to force the pin into GPIO mode +- mode-func - (optional) function number to assign to the pin. If + 'mode-gpio' is set, this property will be ignored. in case of 'mode-gpio' property set: -- output-value - (optional) this set the default output value of the GPIO. -- direction - (optional) this set the direction of the gpio. -- pull-str - (optional) this set the pull strength of the pin. -- pull-assign - (optional) this set the pull assignement (up/down) of the pin. +- output-value - (optional) this set the default output value of the GPIO +- direction - (optional) this set the direction of the gpio +- pull-str - (optional) this set the pull strength of the pin +- pull-assign - (optional) this set the pull assignement (up/down) of the pin - invert - (optional) this input pin is inverted Example: -- cgit v1.1