From 618766c09855f7167f510eafa89172ae44cae543 Mon Sep 17 00:00:00 2001 From: Akshay Saraswat Date: Mon, 25 Feb 2013 01:13:01 +0000 Subject: Exynos5: FDT: Add TMU device node values Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values. Signed-off-by: Akshay Saraswat Acked-by: Simon Glass Signed-off-by: Minkyu Kang --- doc/device-tree-bindings/exynos/tmu.txt | 41 +++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 doc/device-tree-bindings/exynos/tmu.txt (limited to 'doc') diff --git a/doc/device-tree-bindings/exynos/tmu.txt b/doc/device-tree-bindings/exynos/tmu.txt new file mode 100644 index 0000000..bb734dc --- /dev/null +++ b/doc/device-tree-bindings/exynos/tmu.txt @@ -0,0 +1,41 @@ +Exynos Thermal management Unit + +Required properties: + + - compatible : Should be "samsung,exynos-tmu" for TMU + - samsung,min-temp : Minimum temperature value (25 degree celsius) + - Current temperature of SoC should be more than this value. + - samsung,max-temp : Maximum temperature value (125 degree celsius) + - Current temperature of SoC should be less than this value. + - samsung,start-warning : Temperature at which TMU starts giving warning (degree celsius) + - samsung,start-tripping : Temperature at which system will trip and shutdown (degree celsius) + - samsung,efuse-min-value : SOC efuse min value (Constant 40) + - efuse-value should be more than this value. + - samsung,efuse-value : SOC actual efuse value (Literal value) + - This is the data trimming info. + - This value is used to calculate measuring error. + - samsung,efuse-max-value : SoC max efuse value (Constant 100) + - efuse-value should be less than this value. + - samsung,slope : Default value 274761730 (Constant 0x1060_8802). + - This is the default value for TMU_CONTROL register. + - It sets the gain of amplifier to the positive-tc generator block. + - It selects thermal tripping mode and enables thermal tripping. + - samsung,dc-value : Measured data calibration value (Constant 25) + - Used for tempearture calculation. + - This is 25 because temperature measured is always above 25 degrees. + + +Example: + +tmu@10060000 { + compatible = "samsung,exynos-tmu" + samsung,min-temp = <25>; + samsung,max-temp = <125>; + samsung,start-warning = <95>; + samsung,start-tripping = <105>; + samsung,efuse-min-value = <40>; + samsung,efuse-value = <55>; + samsung,efuse-max-value = <100>; + samsung,slope = <274761730>; + samsung,dc-value = <25>; +}; -- cgit v1.1