From d521197d69c0fe85afdd75c537783adf95905ede Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 19 Jan 2016 14:24:12 +0100 Subject: x86: baytrail: Add option to disable the internal UART to setup_early_uart() This patch adds a parameter to the function setup_early_uart() to either enable or disable the internal BayTrail legacy UART. Since the name setup_early_uart() does not match its functionality any more, lets rename it to setup_internal_uart() as well in this patch. Signed-off-by: Stefan Roese Reviewed-by: Bin Meng Reviewed-by: Simon Glass --- doc/README.x86 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/README.x86') diff --git a/doc/README.x86 b/doc/README.x86 index 36aaef0..6d9cb10 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -706,7 +706,7 @@ the board, then you can use post_code() calls from C or assembler to monitor boot progress. This can be good for debugging. If not, you can try to get serial working as early as possible. The early -debug serial port may be useful here. See setup_early_uart() for an example. +debug serial port may be useful here. See setup_internal_uart() for an example. During the U-Boot porting, one of the important steps is to write correct PIRQ routing information in the board device tree. Without it, device drivers in the -- cgit v1.1