From f4e190e317b860bb15e221a29cbf16976a04e3ca Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 28 Aug 2015 20:13:18 +0900 Subject: ARM: uniphier: enable SPL_OF_CONTROL Device Tree really improves code maintainability and is now available for SPL too. This is the state-of-the-art implementation in U-boot. The board files (platform data) are no longer needed. Signed-off-by: Masahiro Yamada Reviewed-by: Marek Vasut Reviewed-by: Simon Glass --- doc/README.uniphier | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'doc/README.uniphier') diff --git a/doc/README.uniphier b/doc/README.uniphier index 52d681b..e936f40 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -52,12 +52,12 @@ Burn U-Boot images to NAND -------------------------- Write two files to the NAND device as follows: - - spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot-dtb.img at the offset address 0x00010000 + - spl/u-boot-spl-dtb.bin at the offset address 0x00000000 + - u-boot-dtb.img at the offset address 0x00010000 If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl.bin and u-boot-dtb.img to the TFTP public directory, -and then run the following command at the U-Boot command line: +Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public +directory, and then run the following command at the U-Boot command line: => run nandupdate @@ -129,4 +129,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards. -- Masahiro Yamada -Jul. 2015 +Aug. 2015 -- cgit v1.1