From 0c8721a466b5e0eca7e7fbe1007777fa82100541 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 23 Sep 2005 11:05:55 +0200 Subject: Cleanup (PPC4xx is AMCC now) --- doc/README.ocotea | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'doc/README.ocotea') diff --git a/doc/README.ocotea b/doc/README.ocotea index 403735d..9ac3a18 100644 --- a/doc/README.ocotea +++ b/doc/README.ocotea @@ -1,9 +1,9 @@ - IBM Ocotea Board + AMCC Ocotea Board Last Update: March 2, 2004 ======================================================================= -This file contains some handy info regarding U-Boot and the IBM +This file contains some handy info regarding U-Boot and the AMCC Ocotea 440gx evalutation board. See the README.ppc440 for additional information. @@ -53,7 +53,7 @@ Special note about the Cicada CIS8201: This has been done in the 440gx_enet.c file with a #ifdef/endif pair. -IBM does not store the EMAC ethernet addresses within their PIBS bootloader. +AMCC does not store the EMAC ethernet addresses within their PIBS bootloader. The addresses contained in the config header file are from my particular board and you _*should*_ change them to reflect your board either in the config file and/or in your environment variables. I found the addresses on -- cgit v1.1