From 6be55ee2252c364b16d99537bf9fe7d96d5c77b4 Mon Sep 17 00:00:00 2001 From: Jerry Huang Date: Mon, 7 Nov 2011 13:20:21 +0800 Subject: powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds The new MPC8360EMDS board changes the oscillator to 33.33MHz in order to support QE 500MHz since 2008. Signed-off-by: Jerry Huang Signed-off-by: Kim Phillips --- doc/README.mpc8360emds | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'doc/README.mpc8360emds') diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds index d65a2a4..2b39160 100644 --- a/doc/README.mpc8360emds +++ b/doc/README.mpc8360emds @@ -87,28 +87,36 @@ Freescale MPC8360EMDS Board 4. Compilation + MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip). + Assuming you're using BASH shell: export CROSS_COMPILE=your-cross-compile-prefix cd u-boot make distclean - make MPC8360EMDS_config + make MPC8360EMDS_XX_config make - MPC8360 support PCI in host and slave mode. + MPC8360EMDS support ATM, PCI in host and slave mode. + + To make u-boot support ATM : + 1) Make MPC8360EMDS_XX_ATM_config To make u-boot support PCI host 66M : 1) DIP SW support PCI mode as described in Section 1.1. - 2) Make MPC8360EMDS_HOST_66_config + 2) Make MPC8360EMDS_XX_HOST_66_config To make u-boot support PCI host 33M : 1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1 - 2) Make MPC8360EMDS_HOST_33_config + 2) Make MPC8360EMDS_XX_HOST_33_config To make u-boot support PCI slave 66M : 1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1 - 2) Make MPC8360EMDS_SLAVE_config + 2) Make MPC8360EMDS_XX_SLAVE_config + (where XX is: + 33 - 33.33MHz oscillator + 66 - 66MHz oscillator) 5. Downloading and Flashing Images -- cgit v1.1